MCC TM Micro Commercial Components HER201 THRU HER208 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * * * * Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) High Surge Current Capability Low Forward Voltage Drop High Reliability Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 2.0 Amp High Efficient Rectifiers 50 to 1000 Volts Maximum Ratings * * * Operating Temperature: -55C to +150C Storage Temperature: -55C to +150C For capacitive load, derate current by 20% MCC Device Maximum Maximum Catalog Marking Recurrent RMS Number Peak Reverse Voltage Voltage HER201 50V 35V HER201 HER202 100V 70V HER202 HER203 200V 140V HER203 HER204 300V 210V HER204 HER205 400V 280V HER205 HER206 HER206 600V 420V HER207 800V 560V HER207 HER208 1000V 700V HER208 DO-15 Maximum DC Blocking Voltage 50V 100V 200V 300V 400V 600V 800V 1000V D A Cathode Mark B Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage HER201-204 HER205 HER206-208 IF(AV) 2A IFSM 60A 8.3ms, half sine VF 1.0V 1.3V 1.7V 5A 100A IFM = 2.0A*; TA = 25C Reverse Current At IR TA = 25C Rated DC Blocking TA = 100C Voltage (Maximum DC) Maximum Reverse Recovery Time 50ns IF=0.5A, IR=1.0A, Trr HER201-205 75ns Irr=0.25A HER206-208 Typical Junction Capacitance 50pF Measured at HER201-205 CJ 30pF 1.0MHz, VR=4.0V HER206-208 *Pulse Test: Pulse Width 300sec, Duty Cycle 1% Note: D TA = 55C C DIMENSIONS DIM A B C D INCHES MIN .230 .104 .028 1.000 MAX .300 .140 .034 --- MM MIN 5.8 2.6 0.71 25.40 MAX 7.6 3.6 0.86 --- NOTE 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. Revision: B www.mccsemi.com 1 of 3 2013/01/01 MCC HER201 THRU HER208 Micro Commercial Components RATINGS AND CHARACTERISTIC CURVES FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 10W NONINDUCTIVE FIG.2- MAXIMUM AVERAGE FORWARD CURRENT DERATING trr AVERAGE FORWARD CURRENT. (A) 50W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms 1cm 1.0 0 25 50 75 100 125 150 175 o AMBIENT TEMPERATURE. ( C) 10 1.0 0.01 0.001 0.1 20 40 60 80 100 HE R2 05 0.1 04 Tj=25 0C 120 .2 .4 .6 .8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.6- TYPICAL JUNCTION CAPACITANCE FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 60 150 JUNCTION CAPACITANCE.(pF) 80 50 HER2 06~H ER20 8 10 1.0 ~HER2 Tj=100 0C 100 HER20 1 INSTANTANEOUS FORWARD CURRENT. (A) 1000 PEAK FORWARD SURGE CURRENT. (A) 2.0 FIG.4- TYPICAL FORWARD CHARACTERISTICS FIG.3- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT. ( A) SET TIME BASE FOR 5/ 10ns/ cm Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 3.0 8.3ms Single Half Sine Wave JEDEC Method 40 30 20 125 100 HE 75 50 HE R2 01 ~H ER 06 20 ~H 5 ER 20 8 R2 25 10 0 0 1 2 5 10 20 50 100 .1 .5 1 2 5 10 20 50 100 200 500 800 REVERSE VOLTAGE. (V) NUMBER OF CYCLES AT 60Hz www.mccsemi.com 2 of 3 Revision: B 2013/01/01 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 4Kpcs/Reel Part Number-AP Ammo Packing: 3Kpcs/Ammo Box Part Number-BP Bulk: 25Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 3 of 3 2013/01/01 3