2N6400 - Teccor Electronics, Inc.

Thyristor Product Catalog +1 972-580-7777

Thyristor

Product

Catalog

Teccor Electronics

1800 Hurd Drive

Irving, Texas 75038

United States of America

Phone: +1 972-580-7777

Fax: +1 972-550-1309

Website: http://www.teccor.com

E-mail: power.techsales@teccor.com

+1 972-580-7777 Thyristor Product Catalog

Teccor Electronics reserves the right to make changes at any time in order to improve designs and to supply the best products possible.

The information in this catalog has been carefully checked and is believed to be accurate and reliable; however, no liability of any type

shall be incurred by Teccor for the use of the circuits or devices described in this publication. Furthermore, no license of any patent

rights is implied or given to any purchaser.

Teccor Electronics is the proprietor of the QUADRAC® trademark. is a registered trademark of Underwriters Laborato-

ries, Inc. All other brand names may be trademarks of their respective companies. To conserve space in this catalog, the

trademark sign (®) is omitted.

Thyristor Product Catalog +1 972-580-7777

Contents

Product Selection Guide

Product Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vi

Circuit Requirement Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vii

Product Packages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - viii

Description of Part Numbers- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - x

Quality and Reliability Assurance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -xii

Standard Terms and Conditions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - xiv

Data Sheets

V-I Characteristics of Thyristor Devices - - - - - - - - - - - - - - - - - - - - - - - - E0-2

Electrical Parameter Terminology - - - - - - - - - - - - - - - - - - - - - - - - - - - - E0-3

Electrical Specifications

Sensitive Triacs- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E1

Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E2

QUADRACs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E3

Alternistor Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E4

Sensitive SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E5

SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E6

Rectifiers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E7

Diacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E8

SIDAC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E9

Mechanical Specifications

Package Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M1

Lead Form Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M2

Packing Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M3

Application Notes

Fundamental Characteristics of Thyristors - - - - - - - - - - - - - - - - - - - AN1001

Gating, Latching, and Holding of SCRs and Triacs - - - - - - - - - - - - - AN1002

Phase Control Using Thyristors- - - - - - - - - - - - - - - - - - - - - - - - - - - AN1003

Mounting and Handling of Semiconductor Devices - - - - - - - - - - - - - AN1004

Surface Mount Soldering Recommendations - - - - - - - - - - - - - - - - - AN1005

Testing Teccor Semiconductor Devices

Using Curve Tracers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AN1006

Thyristors Used As AC Static Switches and Relays - - - - - - - - - - - - AN1007

Explanation of Maximum Ratings and Characteristics for Thyristors - AN1008

Miscellaneous Design Tips and Facts - - - - - - - - - - - - - - - - - - - - - - AN1009

Thyristors for Ignition of Fluorescent Lamps - - - - - - - - - - - - - - - - - - AN1010

Appendix

Cross Reference Guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A1

Part Numbers Index- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A27

+1 972-580-7777 Thyristor Product Catalog

Thyristor Product Catalog +1 972-580-7777

Product Selection Guide

Product Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 2

Circuit Requirement Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 3

Product Packages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 4

Description of Part Numbers- - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 6

Quality and Reliability Assurance - - - - - - - - - - - - - - - - - - - - - - - - - P 8

Standard Terms and Conditions - - - - - - - - - - - - - - - - - - - - - - - - - P 10

+1 972-580-7777 Thyristor Product Catalog(972) 580-7777

Product Descriptions

Thyristors

A thyristor is any semiconductor switch with a bi-stable action

depending on p-n-p-n regenerative feedback. Thyristors are nor-

mally two- or three-terminal devices for either unidirectional or bi-

directional circuit configurations. Thyristors can have many forms,

but they have certain commonalities. All thyristors are solid state

switches that are normally open circuits (very high impedance),

capable of withstanding rated blocking/off-state voltage until trig-

gered to on state. When triggered to on state, thyristors become a

low-impedance current path until principle current either stops or

drops below a minimum holding level. After a thyristor is triggered

to on-state condition, the trigger current can be removed without

turning off the device. Thyristors are used to control the flow of

electrical currents in applications including:

• Home appliances (lighting, heating, temperature control, alarm

activation, fan speed)

• Electrical tools (for controlled actions such as motor speed, sta-

pling event, battery charging)

• Outdoor equipment (water sprinklers, gas engine ignition, elec-

tronic displays, area lighting, sports equipment, physical fitness)

Sensitive Triacs

Teccor's sensitive gate triacs are AC bidirectional silicon

switches that provide guaranteed gate trigger current levels in

Quadrants I, II, III, and IV. Interfacing to microprocessors or other

equipment with single polarity gate triggering is made possible with

sensitive gate triacs. Gate triggering currents of 3 mA, 5 mA,

10 mA, or 20 mA may be specified.

Sensitive gate triacs are capable of controlling AC load currents

from 0.8 A to 8 A rms and can withstand operating voltages from

200 V to 600 V.

Triacs

Teccor's triac products are bidirectional AC switches, capable of

controlling loads from 0.8 A to 35 A rms with 10 mA, 25 mA, and

50 mA IGT in operating Quadrants I, II and III.

Triacs are useful in full-wave AC applications to control AC power

either through full-cycle switching or phase control of current to the

load element. These triacs are rated to block voltage in the “OFF”

condition from 200 V minimum with selected products capable of

1000 V operation. Typical applications include motor speed con-

trols, heater controls, and incandescent light controls.

Quadrac

Quadrac devices, originally developed by Teccor, are triacs and

alternistor triacs with a diac trigger mounted inside the same pack-

age. These devices save the user the expense and assembly time

of buying a discrete diac and assembling in conjunction with a

gated triac.

The Quadrac is offered in capacities from 4 A to 15 A rms and volt-

ages from 200 V ac to 600 V ac.

Alternistor Triacs

The Teccor alternistor is specifically designed for applications

required to switch highly inductive loads. The design of this special

chip effectively offers the same performance as two thyristors

(SCRs) wired inverse parallel (back-to-back).

This new chip construction provides the equivalent of two electri-

cally-separate SCR structures, providing enhanced dv/dt charac-

teristics while retaining the advantages of a single-chip device.

Teccor manufactures 6 A to 40 A alternistors with blocking voltage

rating from 200 V to 1000 V. Alternistors are offered in TO-220,

TO-218, and TO-218X packages with isolated and non-isolated

versions.

Sensitive SCRs

Teccor's sensitive gate SCRs are silicon-controlled rectifiers repre-

senting the best in design, performance, and packaging techniques

for low- and medium-current applications.

Anode currents of 0.8 A to 10 A rms can be controlled by sensitive

gate SCRs with gate drive currents ranging from 12 µA to 500 µA.

Sensitive gate SCRs are ideally suited for interfacing to integrated

circuits or in applications where high current load requirements and

limited gate drive current capabilities exist. Examples include igni-

tion circuits, motor controls, and DC latching for alarms in smoke

detectors. Sensitive gate SCRs are available in voltage ratings to

600 V ac.

SCRs

Teccor's SCR products are half-wave, silicon-controlled rectifiers

that represent the state of the art in design and performance.

Load current capabilities range from 1 A to 70 A rms, and voltages

from 200 V to 1000 V may be specified to meet a variety of appli-

cation needs.

Because of its unidirectional switching capability, the SCR is used

in circuits where high surge currents or latching action is required.

It may also be used for half-wave-type circuits where gate-con-

trolled rectification action is required. Applications include crow-

bars in power supplies, camera flash units, smoke alarms, motor

controls, battery chargers, and engine ignition.

Surge current ratings are available from 30 A in the TO-92 packag-

ing to 950 A in the TO-218X package.

Rectifiers

Teccor manufactures 15 A to 25 A rms rectifiers with voltages

rated from 200 V to 1000 V. Due to the electrically isolated TO-220

package, these rectifiers may be used in common anode or com-

mon cathode circuits using only one part type, thereby simplifying

stock requirements.

Diacs

Diacs are trigger devices used in phase control circuits to provide

gate pulses to a triac or SCR. They are voltage-triggered bidirec-

tional silicon devices housed in DO-35 glass axial lead packages

and DO-214 surface mount packages.

Diac voltage selections from 27 V to 45 V provide trigger pulses

closely matched in symmetry at the positive and negative break-

over points to minimize DC component in the load circuit.

Some applications include gate triggers for light controls, dimmers,

power pulse circuits, voltage references in AC power circuits, and

triac triggers in motor speed controls.

Sidacs

Sidacs represent a unique set of thyristor qualities. The sidac is a

bidirectional voltage triggered switch. Some characteristics of this

device include a normal 95 V to 330 V switching point, negative

resistance range, latching characteristics at turn-on, and a low on-

state voltage drop.

One-cycle surge current capability up to 20 A makes the sidac an

ideal product for dumping charged capacitors through an inductor

in order to generate high-voltage pulses. Applications include light

controls, high-pressure sodium lamp starters, power oscillators,

and high-voltage power supplies.

Thyristor Product Catalog +1 972-580-7777

Circuit Requirement Diagram

BILATERAL VOLTAGE

SWITCH

RECTIFIER REVERSE BLOCKING

THYRISTOR

BIDIRECTIONAL

THYRISTOR

BILATERAL

VOLTAGE TRIGGER

SIDAC * RECTIFIER * DIAC *

GATE CONTROL

DIAC TRIGGER DIRECT

GATE CURRENT

12-500 µA 10-50 mA

SCR *SCR (Sensitive) * QUADRANT OPERATION

(See Quadrant Chart on Data Sheet)

I I I I I I I I I I I I I V

GATE CURRENT

10-100 mA

GATE CURRENT

3-20 mA

SENSITIVE TRIAC *

TRIAC *

OPTIONS

INTERNAL EXTERNAL

DIACS *

QUADRAC *

ALTERNISTOR TRIAC *

* For detailed information, see specific data sheet in product catalog.

+1 972-580-7777 Thyristor Product Catalog(972) 580-7777

Product Packages

* No center lead on TO-92 Sidacs.

Package Code

Isolated Mounting Tab

GY S C E L K J P

Product

Type

Current

(Amps) DO-15 DO-35 DO-214 Compak TO-92 * TO-220 TO-218 TO-218X

TO-3

Fastpak

Sensitive

Triac

0.8 ✔ ✔

1✔ ✔

4✔

6✔

8✔

Triac

0.8 ✔✔

1✔✔

4✔

6✔

8✔

10 ✔

15 ✔

25 ✔

35 ✔

Quadrac

4 ✔

6 ✔

8 ✔

10 ✔

15 ✔

Alternistor

6 ✔

8 ✔

10 ✔

12 ✔

16 ✔

25 ✔✔✔

30 ✔

40 ✔✔

Sensitive

SCR

0.8 ✔ ✔

1.5 ✔

6 ✔

8 ✔

10 ✔

SCR

1 ✔✔

6 ✔

8 ✔

10 ✔

15 ✔

20 ✔

25 ✔

35 ✔✔

65 ✔✔

Rectifier

15 ✔

20 ✔

25 ✔

Diac ✔✔

Sidac ✔ ✔ ✔ *

Thyristor Product Catalog +1 972-580-7777

Product Packages

Non-isolated Mounting Tab

Package Code

FRMWDVN

TO-202 TO-220 TO-218 TO-218X

TO-252

D-Pak

TO-251

V-Pak

TO-263

D2Pak

Current

(Amps)

Product

Type

0.8

Sensitive

Triac

✔ ✔ ✔ 4

✔ ✔ 6

✔ ✔ 8

0.8

Triac

✔✔✔ 4

✔✔ ✔6

✔✔ ✔8

✔✔ ✔10

✔ ✔ 15

✔ ✔ 25

Quadrac

✔ ✔✔✔ 6

Alternistor

✔ ✔✔✔ 8

✔ ✔ 10

✔ ✔ 12

✔ ✔ 16

✔ ✔ 25

✔35

✔ 0.8

Sensitive SCR

✔ 1.5

✔ ✔ ✔ ✔ 4

✔ ✔ ✔ ✔ 6

✔ ✔ ✔ ✔ 8

✔ ✔ ✔ ✔ 10

SCR

✔✔✔ 6

✔✔ ✔✔ 8

✔✔ ✔✔ 10

✔✔✔12

✔ ✔ 16

✔ ✔ 25

✔ ✔ 40

✔✔✔ ✔55

✔70

Rectifier

Diac

✔Sidac

+1 972-580-7777 Thyristor Product Catalog(972) 580-7777

Description of Part Numbers

Sensitive Triac

Quadrac

Sensitive SCR

Triac and Alternistor

L20 04 F5

Device Type

L = Sensitive Triac

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

Current Rating

Package Type

Blank =

Compak

(Surface Mount)

D = TO-252 (Surface Mount)

E = TO-92 (Isolated)

F = TO-202 (Non-islolated)

L = TO-220 (Isolated)

V = TO-251 (Non-islolated)

Gate Variations

3 = 3 mA (Q I, II, III, IV)

5 = 5 mA (Q I, II, III, IV)

6 = 5 mA (Q I, II, III)

6 = 10 mA (Q IV)

8 = 10 mA (Q I, II, III)

8 = 20 mA (Q IV)

Lead Form Dimensions

TO-202

TO-220

TO-92

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

X8 = 0.8 A

N = 1 A

01 = 1 A

04 = 4 A

06 = 6 A

08 = 8 A

Q2004 L T 52

Device Type

Q =

Quadrac

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

Current Rating

04 = 4 A

06 = 6 A

08 = 8 A

10 = 10 A

15 = 15 A

Package Type

L = TO-220 (Isolated)

Gate Variation

T = Internal Diac Trigger

Lead Form Dimensions

TO-220

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

Alternistor

Q20 04 F31

Device Type

Q = Triac or Alternistor

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

80 = 800 V

K0 = 1000 V

Current Rating

X8 = 0.8 A

01 = 1 A

04 = 4 A

06 = 6 A

08 = 8 A

10 = 10 A

12 = 12 A

15 = 15 A

25 = 25 A

30 = 30 A

35 = 35 A

40 = 40 A

Gate Variation

DH3 and VH3 = 10mA (Q I, II, III)

3 = 10 mA (Q I, II, III)

H3 = 20mA (Q I, II, III)

4 = 25 mA (Q I, II, III)

H4 = 35 mA (Q I, II, III) *

5 = 50 mA (Q I, II, III)

H5 = 50 mA (Q I, II, III) *

6 = 80 mA (Q I, II, III) *

7 = 100 mA (Q I, II, III) *

Lead Form Dimensions

TO-202

TO-220

TO-92

TO-218X

TO-218

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

Package Type

D = TO-252 (Surface Mount)

E = TO-92 (Isolated)

F = TO-202 (Non-isolated)

J = TO-218X (Isolated)

K = TO-218 (Isolated)

L = TO-220 (Isolated)

N = TO-263 (Surface Mount)

P =

Fastpak

(Isolated)

R = TO-220 (Non-isolated)

V = TO-251 (Non-isolated)

W = TO-218X (Non-isolated)

* NOTE:

Alternistor device; no Quadrant IV operation

S20 06 FS2

Device Type

S = Sensitive SCR

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

Current Rating

X8 = 0.8 A

N = 1 A

06 = 6 A

08 = 8 A

10 = 10 A

Package Type

Blank = Compak (Surface Mount)

D = TO-252 (Surface Mount)

F = TO-202 (Non-islolated)

L = TO-220 (Isolated)

V = TO-251 (Non-islolated)

Gate Variations

S1 = 50 µA

S2 = 200 µA

S3 = 500 µA

Lead Form Dimensions

TO-202

TO-220

Special Options

V = 4000 V Isolated

(TO-220 Package Only)

EC 103 D175

Device Type

TCR = TO-92 (Isolated)

EC = TO-92 (Isolated)

T = TO-202 (Non-isolated)

2N = JEDEC (Isolated)

Voltage Rating for TCR

-4 = 200 V

-6 = 400 V

-8 = 600 V

Current Rating for TCR

22 = 1.5 A

Lead Form Dimensions

TO-92

TO-202

Current Rating for EC

103 = 0.8 A

Current Rating for T

106 = 4 A (I

= 200 µA)

107 = 4 A (I

= 500 µA)

Current Rating for 2N

5xxx = 0.8 A

Gate Current (for EC series only)

None = 200 µA

1 = 12 µA

2 = 50 µA

3 = 500 µA

Voltage Rating for EC and T

B = 200 V

D = 400 V

M = 600 V

Voltage Rating for 2N

5064 = 200 V

6565 = 400 V

Thyristor Product Catalog +1 972-580-7777

Description of Part Numbers

SCR

Rectifier

Diac

Sidac

S20 08 F12

Device Type

S = Non-sensitive SCR

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

80 = 800 V

K0 = 1000 V

Current Rating

01 = 1 A

06 = 6 A

08 = 8 A

10 = 10 A

12 = 12 A

15 = 15 A

16 = 16 A

20 = 20 A

25 = 25 A

35 = 35 A

55 = 55 A

65 = 65 A

70 = 70 A

Package Type

D = TO

252 (Surface Mount)

E = TO

92 (Isolated)

F = TO-202 (Non-isolated)

J = TO-218X (Isolated)

K = TO-218 (Isolated)

L = TO-220 (Isolated)

M = TO-218 (Non-isolated)

N = TO-263 (Surface Mount)

R = TO-220 (Non-isolated)

V = TO

251 (Non-isolated)

W = TO-218X (Non-isolated)

Lead Form Dimensions

202

220

218X

218

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

D20 15 L55

Device Type

D = Rectifier

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

80 = 800 V

K0 = 1000 V

Current Rating

15 = 15 A

20 = 20 A

25 = 25 A

Package Type

L = TO-220 (Isolated)

Lead Form Dimensions

TO-220

Special Options

V = 4000 V Isolation

HT 32 91

Device Type

HT = Diac Trigger in DO-35

ST = Diac Trigger in DO-214

Lead Form Dimensions

DO-35

Voltage Rating

32 = 27 V to 37 V

35 = 30 V to 40 V

40 = 35 V to 45 V

32A / 5761 = 28 V to 36 V

32B / 5761A = 30 V to 34 V

34B = 32 V to 36 V

36A / 5762 = 32 V to 40 V

36B = 34 V to 38 V

K105 0E70

Device Type

K = Sidac

Voltage Rating

105 = 95 V to 113 V

110 = 104 V to 118 V

120 = 110 V to 125 V

130 = 120 V to 138 V

140 = 130 V to 146 V

150 = 140 V to 170 V

200 = 190 V to 215 V

220 = 205 V to 230 V

240 = 220 V to 250 V

250 = 240 V to 280 V

300 = 270 V to 330 V

Current Rating

0 = 1 A

Package Type

E = TO-92 (Isolated)

F = TO-202 (Non-islolated)

G = DO-15X (Isolated)

S = DO-214 (Surface Mount)

Lead Form Dimensions

TO-202

TO-92

+1 972-580-7777 Thyristor Product Catalog(972) 580-7777

Quality and Reliability

It is Teccor’s policy to ship quality products on time. We accom-

plish this through Total Quality Management based on the funda-

mentals of customer focus, continuous improvement, and people

involvement.

In support of this commitment, Teccor applies the following princi-

ples:

• Employees shall be respected, involved, informed, and qualified

for their job with appropriate education, training, and experience.

• Customer expectations shall be met or exceeded by consistently

shipping products that meet the agreed specifications, quality

levels, quantities, schedules, and test and reliability parameters.

• Suppliers shall be selected by considering quality, service, deliv-

ery, and cost of ownership.

• Design of products and processes will be driven by customer

needs, reliability, and manufacturability.

It is the responsibility of management to incorporate these

principles into policies and systems.

It is the responsibility of those in leadership roles to coach their

people and to reinforce these principles.

It is the responsibility of each individual employee to follow the

spirit of this statement to ensure that we meet the primary policy

— to ship quality products on time.

Quality Assurance

Incoming Material Quality

Teccor “Vendor Analysis” programs provide stringent require-

ments before components are delivered to Teccor. In addition,

purchased materials are tested rigidly at incoming inspection for

specification compliance prior to acceptance for use.

Process Controls

From silicon slice input through final testing, we use statistical

methods to control all critical processes. Process audits and lot

inspections are performed routinely at all stages of the manufac-

turing cycle.

Parametric Testing

All devices are 100% computer tested for specific electrical char-

acteristics at critical processing points.

Final Inspection

Each completed manufacturing lot is sampled and tested for

compliance with electrical and mechanical requirements.

Reliability Testing

Random samples are taken from various product families for

ongoing reliability testing.

Finished Goods Inspection

Product assurance inspection is performed immediately prior to

shipping.

Design Assurance

The design and production of Teccor devices is a demanding and

challenging task. Disciplined skills coupled with advanced com-

puter-aided design, production techniques, and test equipment

are essential elements in Teccor's ability to meet your demands

for the very highest levels of quality.

All products must first undergo rigid quality design reviews and

pass extensive environmental life testing. Teccor uses Statistical

Process Control (SPC) with associated control charts throughout

to monitor the manufacturing processes.

Only those products which pass tests designed to assure Tec-

cor's high quality and reliability standards, while economically

satisfying customer requirements, are approved for shipment. All

new products and materials must receive approval of QRA prior

to being released to production.

The combination of reliability testing, process controls, and lot

tracking assures the quality and reliability of Teccor's devices.

Since even the best control systems cannot overcome measure-

ment limitations, Teccor designs and manufactures its own com-

puterized test equipment.

Teccor's Reliability Engineering Group conducts ongoing product

reliability testing to further confirm the design and manufacturing

parameters.

Thyristor Product Catalog +1 972-580-7777

Quality and Reliability

Reliability Stress Tests

The following table contains brief descriptions of the reliability tests commonly used in evaluating Teccor product reliability on a peri-

odic basis. These tests are applied across product lines depending on product availability and test equipment capacities. Other tests

may be performed when appropriate.

Flammability Test

For the UL 94V0 flammability test, all expoxies used in Teccor encapsulated devices are recognized by Underwriters Laboratories

Test Type Typical Conditions Test Description Standards

High Temperature

AC Blocking

TA = 100 °C to 150 °C, Bias @

100%

Rated VDRM, t = 24 hrs to 1000 hrs

Evaluation of the reliability of

product under bias conditions

and elevated temperature

MIL-STD-750, M-1040

High Temperature

Storage Life

TA = 150 °C, t = 250 to 1000 hrs Evaluation of the effects on

devices after long periods of

storage at high temperature

MIL-STD-750, M-1031

Temperature and Humidity

Bias Life

TA = 85 °C to 95 °C, rh = 85% to

95%

Bias @ 80% Rated VDRM

(320 VDC max)

t = 168 to 1008 hrs

Evaluation of the reliability of non-

hermetic packaged devices in

humid environments

EIA / JEDEC, JESD22-A101

Temperature Cycle

[Air to Air]

TA = -65°C to 150°C,

cycles = 10 to 500

Evaluation of the device’s ability

to withstand the exposure to

extreme temperatures and the

forces of TCE during transitions

between temperatures

MIL-STD-750, M-1051,

EIA / JEDEC, JESD22-A104

Thermal Shock

[Liquid to Liquid]

TA = 0 °C to 100 °C, ttxfr = ≤10 s,

cycled = 10 to 20

Evaluation of the device’s ability

to withstand the sudden changes

in temperature and exposure to

extreme temperatures

MIL-STD-750, M-1056

Autoclave TA = 121 °C, rh = 100%, P = 15 psig,

t = 24 hrs to 168 hrs

Accelerated environmental test to

evaluate the moisture resistance

of plastic packages

EIA / JEDEC, JESD22-A102

Resistance to

Solder Heat

TA = 260 °C, t = 10 s Evaluation of the device’s ability

to withstand the temperatures as

seen in wave soldering

operations

MIL-STD-750, M-2031

Solderability Steam aging = 1 hr to 8 hrs,

Tsolder = 245 °C, Flux = R

Evaluation of the solderability of

device terminals after an

extended period

MIL-STD-750, M-2026,

ANSI-J-STD-002

+1 972-580-7777 Thyristor Product Catalog(972) 580-7777

Standard Terms and Conditions

Supplier shall not be bound by any term proposed by Buyer in the

absence of written agreement to such term signed by an autho-

rized officer of Supplier.

(1) PRICE:

(A) Supplier reserves the right to change product prices at

any time but, whenever practicable, Supplier will give

Buyer at least thirty (30) days written notice before the

effective date of any price change. Unless Supplier has

specifically agreed in writing, signed by an authorized

officer of Supplier, that a quoted price shall not be sub-

ject to change for a certain time, all products shipped on

or after the effective date of a price change may be

billed at the new price level.

(B) Whenever Supplier agrees to a modification of Buyer's

order (which modification must be in writing and signed

by an authorized officer of Supplier), Supplier reserves

the right to alter its price, whether or not such price was

quoted as “firm.”

hereafter enacted, applicable to the goods sold. Taxes

will be added by Supplier to the sales prices whenever

Supplier has legal obligation to collect them and will be

paid by Buyer as invoiced unless Buyer provides Sup-

plier with a proper tax exemption certificate.

(2) PRODUCTION: Supplier may, at its sole discretion and at

any time, withdraw any catalog item from further production

without notice or liability to Buyer.

(3) INTEREST:

(A) All late payments shall bear interest thirty (30) days after

the due date stated on the invoice until paid at the lower

of one and one-half percent per month or the maximum

rate permitted by law. All interest becoming due shall, if

not paid when due, be added to principal and bear inter-

est from the due date. At Supplier's option, any payment

shall be applied first to interest and then to principal.

(B) It is the intention of the parties to comply with the laws of

the jurisdiction governing any agreement between the

parties relating to interest. If any construction of the

agreement between the parties indicates a different

right given to Supplier to demand or receive any sum

greater than that permissible by law as interest, such as

a mistake in calculation or wording, this paragraph shall

override. In any contingency which will cause the inter-

est paid or agreed to be paid to exceed the maximum

rate permitted by law, such excess will be applied to the

reduction of any principal amount due, or if there is no

principal amount due, shall be refunded.

(4) TITLE AND DELIVERY: Title to goods ordered by Buyer and

risk of loss or damage in transit or thereafter shall pass to

Buyer upon Supplier's delivery of the goods at Supplier's

plant or to a common carrier for shipment to Buyer.

(5) CONTINGENCIES: Supplier shall not be responsible for any

failure to perform due to causes reasonably beyond its con-

trol. These causes shall include, but not be restricted to, fire,

storm, flood, earthquake, explosion, accident, acts of public

enemy, war rebellion, insurrection, sabotage, epidemic,

quarantine restrictions, labor disputes, labor shortages, labor

slow downs and sit downs, transportation embargoes, failure

or delays in transportation, inability to secure raw materials

or machinery for the manufacture of its devices, acts of God,

acts of the Federal Government or any agency thereof, acts

of any state or local government or agency thereof, and judi-

cial action. Similar causes shall excuse Buyer for failure to

take goods ordered by Buyer, from the time Supplier

receives written notice from Buyer and for as long as the dis-

abling cause continues, other than for goods already in tran-

sit or specially fabricated and not readily saleable to other

buyers.

Supplier assumes no responsibility for any tools, dies, and

other equipment furnished Supplier by Buyer.

(6) LIMITED WARRANTY AND EXCLUSIVE REMEDY: Supplier

warrants all catalog products to be free from defects in mate-

rials and workmanship under normal and proper use and

application for a period of twelve (12) months from the date

code on the product in question (or if none, from the date of

delivery to Buyer.) With respect to products assembled, pre-

pared, or manufactured to Buyer's specifications, Supplier

warrants only that such products will meet Buyer's specifica-

tions upon delivery. As the party responsible for the specifi-

cations, Buyer shall be responsible for testing and inspecting

the products for adherence to specifications, and Supplier

shall have no liability in the absence of such testing and

inspection or if the product passes such testing or inspec-

tion. THE ABOVE WARRANTY IS THE ONLY WARRANTY

EXTENDED BY SUPPLIER, AND IS IN LIEU OF AND

EXCLUDES ALL OTHER WARRANTIES AND CONDI-

TIONS, EXPRESSED OR IMPLIED (EXCEPT AS PRO-

VIDED HEREIN AS TO TITLE), ON ANY GOODS OR

SERVICES SOLD OR RENDERED BY SUPPLIER, INCLUD-

ING ANY IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. THIS

WARRANTY WILL NOT CREATE WARRANTY COVERAGE

FOR ANY ITEM INTO WHICH ANY PRODUCT SOLD BY

SUPPLIER MAY HAVE BEEN INCORPORATED OR

ADDED.

Thyristor Product Catalog +1 972-580-7777

Standard Terms and Conditions

SUPPLIER'S ENTIRE LIABILITY AND BUYER'S EXCLU-

SIVE REMEDY UNDER THIS WARRANTY SHALL BE, AT

SUPPLIER'S OPTION, EITHER THE REPLACEMENT OF,

REPAIR OF, OR ISSUANCE OF CREDIT TO BUYER'S

ACCOUNT WITH SUPPLIER FOR ANY PRODUCTS

WHICH ARE PROPERLY RETURNED BY BUYER DURING

THE WARRANTY PERIOD. All returns must comply with the

following conditions:

(A) Supplier is to be promptly notified in writing upon discov-

ery of defects by Buyer.

(B) Buyer must obtain a Return Material Authorization

(RMA) number from the Supplier prior to returning prod-

uct.

tion charges prepaid by Buyer.

(D) Supplier's examination of such product discloses, to its

satisfaction, that such defects have not been caused by

misuse, neglect, improper installation, repair, alteration,

or accident.

(E) The product is returned in the form it was delivered with

any necessary disassembly carried out by Buyer at

Buyer's expense.

IN NO EVENT SHALL SUPPLIER, OR ANYONE ELSE

ASSOCIATED IN THE CREATION OF ANY OF SUPPLIER'S

PRODUCTS OR SERVICES, BE LIABLE TO BUYER FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY

NATURE INCLUDING LOSS OF PROFITS, LOSS OF USE,

BUSINESS INTERUPTION, AND THE LIKE. BUYER

ACKNOWLEDGES THAT THE ABOVE WARRANTIES AND

LIMITATIONS THEREON ARE APPROPRIATE AND REA-

SONABLE IN EFFECTUATING SUPPLIER'S AND BUYER'S

MUTUAL INTENTION TO CONDUCT AN EFFICIENT

TRANSACTION AT PRICES MORE ADVANTAGEOUS TO

BUYER THAN WOULD BE AVAILABLE IN THE PRESENCE

OF OTHER WARRANTIES AND ASSURANCES.

(7) PATENTS: Buyer shall notify Supplier in writing of any claim

that any product or any part of use thereof furnished under

this agreement constitutes an infringement of any U.S.

patent, copyright, trade secret, or other proprietary rights of a

third party. Notice shall be given within a reasonable period

of time which should in most cases be within ten (10) days of

receipt by Buyer of any letter, summons, or complaint per-

taining to such a claim. At its option, Supplier may defend at

its expense any action brought against Buyer to the extent

that it is based on such a claim. Should Supplier choose to

defend any such claim, Supplier may fully participate in the

defense, settlement, or appeal of any action based on such

claim.

Should any product become, or in Supplier's opinion be likely

to become, the subject of an action based on any such claim,

Supplier may, at its option, as the Buyer's exclusive remedy,

either procure for the Buyer the right to continue using the

product, replace the product or modify the product to make it

noninfringing. IN NO EVENT SHALL SUPPLIER BE LIABLE

FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

BASED ON ANY CLAIM OF INFRINGEMENT.

Supplier shall have no liability for any claim based on modifi-

cations of a product made by any person or entity other than

Supplier, or based on use of a product in conjunction with

any other item, unless expressly approved by Supplier. Sup-

plier does not warrant goods against claims of infringement

which are assembled, prepared, or manufactured to Buyer's

specifications.

(8) NON-WAIVER OF DEFAULT: Each shipment made under

any order shall be treated as a separate transaction, but in

the event of any default by Buyer, Supplier may decline to

make further shipments without in any way affecting its rights

under such order. If, despite any default by Buyer, Supplier

elects to continue to make shipments, its action shall not

constitute a waiver of that or any default by Buyer or in any

way affect Supplier's legal remedies for any such default. At

any time, Supplier's failure to exercise any right to remedy

available to it shall not constitute a waiver of that right or

remedy.

(9) TERMINATION: If the products to be furnished under this

order are to be used in the performance of a Government

contract or subcontract, and the Government terminates

such contract in whole or part, this order may be canceled to

the extent it was to be used in the canceled portion of said

Government contract and the liability of Buyer for termination

allowances shall be determined by the then applicable regu-

lations of the Government regarding termination of contracts.

Supplier may cancel any unfilled orders unless Buyer shall,

upon written notice, immediately pay for all goods delivered

or shall pay in advance for all goods ordered but not deliv-

ered, or both, at Supplier's option.

(10) LAW: The validity, performance and construction of these

terms and conditions and any sale made hereunder shall be

governed by the laws of the state of Texas.

(11) ASSIGNS: This agreement shall not be assignable by

either Supplier or Buyer. However, should either Supplier or

Buyer be sold or transferred in its entirety and as an ongoing

business, or should Supplier or Buyer sell or transfer in its

entirety and as an ongoing concern, any division, depart-

ment, or subsidiary responsible in whole or in part for the

performance of this Agreement, this Agreement shall be

binding upon and inure to the benefit of those successors

and assigns of Supplier, Buyer, or such division, department,

or subsidiary.

(12) MODIFICATION OF STANDARD TERMS AND CONDI-

TIONS: No attempted or suggested modification of or addi-

tion to any of the provisions upon the face or reverse of this

form, whether contained or arising in correspondence and/or

documents passing between Supplier and Buyer, in any

course of dealing between Supplier or Buyer, or in any cus-

tomary usage prevalent among businesses comparable to

those of Supplier and/or Buyer, shall be binding upon Sup-

plier unless made and agreed to in writing and signed by an

officer of Supplier.

(13) QUANTITIES: Any variation in quantities of electronic com-

ponents, or other goods shipped over or under the quantities

ordered (not to exceed 5%) shall constitute compliance with

Buyer's order and the unit price will continue to apply.

Notes

Thyristor Product Catalog +1 972-580-7777

Data Sheets

V-I Characteristics of Thyristor Devices - - - - - - - - - - - - - - - - - - - - - E0-2

Electrical Parameter Terminology - - - - - - - - - - - - - - - - - - - - - - - - - E0-3