SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 features common to all types D D D D D D D additional features of the SN55116/SN75116 D Choice of Ceramic or Plastic Packages D Independent Driver and Receiver D Choice of Open-Collector or Totem-Pole Single 5-V Supply 3-State Driver Output Circuitry TTL-Compatible Driver Inputs TTL-Compatible Receiver Output Differential Line Operation Receiver Output Strobe (SN55116, SN75116, SN75117) or Enable (SN75118, SN75119) Designed for Party-Line (Data-Bus) Applications Outputs on Both Driver and Receiver D Dual Data Inputs on Driver D Optional Line-Termination Resistor in D D Receiver 15-V Receiver Common-Mode Capability Receiver Frequency-Response Control additional features of the SN75117 D Driver Output Internally Connected to Receiver Input The SN75118 is an SN75116 With 3-State Receiver Output Circuitry The SN75119 is an SN75117 With 3-State Receiver Output Circuitry description These integrated circuits are designed for use in interfacing between TTL-type digital systems and differential data-transmission lines. They are especially useful for party-line (data-bus) applications. Each of these circuit types combine in one package a 3-state differential line driver and a differential-input line receiver, both of which operate from a single 5-V power supply. The driver inputs and the receiver outputs are TTL compatible. The driver employed is similar to the SN55113 and SN75113 3-state line drivers, and the receiver is similar to the SN55115 and SN75115 line receivers. The SN55116, SN75116, and SN75118 offer all the features of the SN55113 and SN75113 drivers and the SN55115 and SN75115 receivers combined. The driver performs the dual input AND and NAND functions when enabled or presents a high impedance to the load when in the disabled state. The driver output stages are similar to TTL totem-pole outputs, but have the current-sinking portion separated from the current-sourcing portion and both are brought out to adjacent package terminals. This feature allows the user the option of using the driver in the open-collector output configuration, or, by connecting the adjacent source and sink terminals together, of using the driver in the normal totem-pole output configuration. The receiver portion of the SN55116, SN75116, and SN75118 features a differential-input circuit having a common-mode voltage range of 15 V. An internal 130- equivalent resistor also is provided, which optionally can be used to terminate the transmission line. A frequency-response control terminal allows the user to reduce the speed of the receiver or to improve differential noise immunity. The receivers of the SN55116 and SN75116 have an output strobe and a split totem-pole output. The receiver of the SN75118 has an output-enable for the 3-state split totem-pole output. The receiver section of either circuit is independent of the driver section except for the VCC and ground terminals. The SN75117 and SN75119 provide the basic driver and receiver functions of the SN55116, SN75116, and SN75118, but use a package that is only half as large. The SN75117 and SN75119 are intended primarily for party-line or bus-organized systems because the driver outputs are internally connected to the receiver inputs. The driver has a single data input and a single enable input. The SN75117 receiver has an output strobe, while the SN75119 receiver has a 3-state output enable. However, these devices do not provide output connection options, line-termination resistors, or receiver frequency-response controls. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1998, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * 1 SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 description (continued) The SN55116 is characterized for operation over the full military temperature range of - 55C to 125C. The SN75116, SN75117, SN75118, and SN75119 are characterized for operation from 0C to 70C. SN55116 . . . J PACKAGE SN75116 . . . D OR N PACKAGE (TOP VIEW) 16 1 DZP DZS DYS DYP RA RT RB GND 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SN75118 . . . D OR N PACKAGE (TOP VIEW) DZP DZS DYS DYP RA RT RB GND VCC DB DA DE RYP RYS RS RTC SN55116 . . . FK PACKAGE (TOP VIEW) DZS DZP NC VCC DB 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC DB DA DE RYP RYS RE RTC SN75117 . . . D OR P PACKAGE (TOP VIEW) DI B A GND DA DE NC RYP RYS 1 8 2 7 3 6 4 5 VCC DE RY RS SN75119 . . . D OR P PACKAGE (TOP VIEW) DI B A GND RB GND NC RTC RS DYS DYP NC RA RT 1 1 8 2 7 3 6 4 5 VCC DE RY RE NC - No internal connection Function Tables '116, SN75118 DRIVER INPUTS DE DA DB L H H H X L X H X X L H SN75117, SN75119 DRIVER INPUTS OUTPUTS DY DZ Z L L H DI DE H L X H H L Z H H L DIFF INPUT L H H X L H L H Z INPUTS OUTPUTS RY '116 SN75118 H H L H L Z SN75117, SN75119 RECEIVER '116, SN75118 RECEIVER RS/RE OUTPUTS A B Z H L A B H L X L H X OUTPUT RY RS/RE SN75117 SN75119 H H L H L H H L Z H = high level (VI VIH min or VID more positive than VTH max), L = low level (VI VIL max or VID more negative than VTL max), X = irrelevant, Z = high impedance (off) 2 * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 logic symbol logic diagram (positive logic) '116 & DE DA DB RB RA RT RS RTC 13 14 4 3 EN 1 2 15 7 DE DYS RT 11 DZS DB DA DB RB RA RT RE RTC 14 DI RS RY 15 1 RYP 2 RYS RB 4 3 EN 1 15 2 DYP RA DYS RT DZP RTC DZS RS 7 RE RY DZP (pullup) DZS (sink) 12 5 11 6 RYP (pullup) RYS (sink) 9 10 5 6 10 9 12 RT 11 EN RESP SN75118 Receiver RYP RE RYS RB RA RT 7 1 3 EN 5 RTC 2 10 7 12 5 11 6 1 SN75117 Driver and Receiver B RS & DE 5 6 EN RYS (sink) A 6 7 RYP (pullup) 9 5 7 6 1 3 SN75119 DI DYS (sink) 7 DI DE DYP (pullup) '116 Receiver SN75117 DE 14 RESP & 13 4 3 SN75118 DE 13 DZP DA 12 10 9 DYP & 5 6 '116 and SN75118 2 3 2 B RE EN DE 5 B BUS SN75119 Driver and Receiver 7 1 6 3 2 A A DI RY RY A B BUS These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown for the SN55116 and SN75116 are for the D, J, and N packages, those shown for the SN75118 are for the D and N packages, and those shown for SN75117 and SN75119 are for the D and P packages. * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * 3 SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 schematics of inputs and outputs EQUIVALENT OF EACH DRIVER INPUT AND EACH RE AND RS INPUT VCC 4 k NOM TYPICAL OF ALL OUTPUTS EQUIVALENT OF EACH RECEIVER INPUT (EXCLUDING ENABLES AND STROBES) VCC VCC 1 pF NOM Input Input 7 k NOM 8 k NOM R Pullup output Sink output 130 NOM Driver output R = 9 NOM Receiver output R = 20 NOM On SN75117 and SN75119, common outputs replace the separate pullup and sink outputs. absolute maximum ratings over operating free-air temperature (unless otherwise noted) Supply voltage, VCC (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI: DA, DB, DE, DI, RE, and RS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V RA, RB, RT for '116, SN75118 only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V A and B for SN75117, SN75119 only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 6 V Off-state voltage applied to open-collector outputs: '116, SN75118 only . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V Continuous total power dissipation (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Case temperature for 60 seconds, TC: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or P package . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values are with respect to the network ground terminal. 2. In the FK and J packages, the SN55116 chip is alloy mounted. The SN75116, SN75117, SN75118, and SN75119 chips are glass mounted. 4 * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 125C POWER RATING D (8 pin) 725 mW 5.8 mW/C 464 mW -- D (16 pin) 950 mW 7.6 mW/C 608 mW -- FK 1375 mW 11.0 mW/C 880 mW 275 mW J 1375 mW 11.0 mW/C 880 mW 275 mW N 1150 mW 9.2 mW/C 736 mW -- P 1000 mW 8.0 mW/C 640 mW -- recommended operating conditions Supply voltage, VCC High-level input voltage, VIH Low-level input voltage, VIL All inputs except differential inputs Low level output current Low-level current, IOL NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 2 0.8 -40 Receivers -5 -5 Drivers 40 40 Receivers 15 15 15 15 SN75117, SN75119 0 6 0 15 SN75117, SN75119 Operating free-air temperature, TA * * 6 15 0 6 0 6 -55 125 0 70 POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 V V 0.8 '116, SN75118 Common mode receiver input voltage Common-mode voltage, VICR 2 -40 '116, SN75118 Receiver input voltage, voltage VI UNIT MIN Drivers High level output current, High-level current IOH SN75116, SN75117, SN75118, SN75119 SN55116 PARAMETER V mA mA V V C 5 VIK VOH '116, SN75118 TEST CONDITIONS PARAMETER Input clamp voltage VCC = MIN, VCC = MIN, VIL = 0.8 V, IIH = 2 V High-level output voltage MIN II = - 12 mA IOH = - 40 mA 2 3 2 3 55C 125C TA = - 55 C to 125 C (SN55116) IOH = - 10 mA 2 2 IOH = - 40 mA 1.8 1.8 IOL = 40 mA VIH = 2 V, VIL = 0.8 V, IO = - 40 mA, DE at 0.8 V * HOUSTON, * DALLAS, POST POST OFFICE OFFICE BOXBOX 1443655303 TEXAS TEXAS 77251-1443 75265 TA = 25C Input current at maximum input voltage IIH High-level input current IIL Low-level input current IOS ICC -1.5 3.4 VCC = MAX, II -0.9 2.4 VCC = MIN, VCC = MAX,, VO = 12 V TA = MAX VCC = MAX, VO = 0 to VCC, VCC = MAX MAX, DE at 0.8 0 8 V, V TA = MAX MAX 3.4 Output clamp voltage Off-state Off state (high (high-impedance-state) impedance state) output current -1.5 TYP 2.4 Low-level output voltage IOZ -0.9 MIN IOH = - 10 mA VOK Off-state open-collector output current MAX TA = 25C (SN55116), 0C TA = 0 C to 70C 70 C (SN75116, SN75117, SN75118, SN75119) VOL IO(off) SN75117, SN75119 TYP 1 UNIT V V 0.4 0.4 V -1.5 -1.5 V 10 SN55116 200 SN75116, SN75118 20 A 10 DE at 0.8 V, TA = 25C VO = 0 SN55116 -300 VO = 0.4 V to VCC SN55116 150 VO = 0 to VCC SN75116, SN75118 20 A VCC = MAX MAX, 55V VI = 5.5 VCC = MAX, VI = 2.4 V 40 40 A VCC = MAX, VI = 0.4 V -1.6 -1.6 mA Short-circuit output current VCC = MAX, VO = 0, Supply current (driver and receiver combined) VCC = MAX MAX, TA = 25C Driver or enable input 1 TA = 25C -40 42 1 mA -120 -40 -120 mA 60 42 60 mA All parameters with the exception of off-state open-collector output current are measured with the active pullup connected to the sink output. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at V CC = 5 V and TA = 25C. Not more than one output should be shorted at a time, and duration of the short circuit should not exceed one second. SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS driver section SLLS073D - MAY 1976 - REVISED MAY 1998 6 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 switching characteristics, VCC = 5 V, CL = 30 pF, TA = 25C driver section PARAMETER TEST CONDITIONS TYP MAX 14 30 12 30 See Figure 14 8 20 ns See Figure 15 17 40 ns RL = 180 , See Figure 14 16 30 ns RL = 250 , See Figure 15 20 35 ns tPLH Propagation-delay time, low-to-high level output tPHL Propagation-delay time, high-to-low level output tPZH Output-enable time to high level RL = 180 , tPZL Output-enable time to low level RL = 250 , tPHZ Output-disable time from high level tPLZ Output-disable time from low level See Figure 13 * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * MIN UNIT ns 7 TEST CONDITIONS PARAMETER VIT + VIT - * HOUSTON, * DALLAS, POST POST OFFICE OFFICE BOXBOX 1443655303 TEXAS TEXAS 77251-1443 75265 VI VOH VOL II(rec) II Positive going threshold Positive-going voltage Negative going threshold voltage Negative-going VO = 0.4 V, See Note 3 IOL = 15 mA, VO = 2.4 V, See Note 3 IOL = - 5 mA, Input voltage range# VCC = 5 V, High level output voltage High-level IOH = - 5 mA, See Note 3 IOL = 15 mA, See Note 3 Low level output voltage Low-level VCC = MAX MAX, See Note 3 Receiver input p current IInputt currentt att maximum i input voltage '116, SN75118 MIN TYP VCC = MIN, VICR = 0, See Note 4 MIN TYP MAX 05 0.5 05 0.5 1 1 UNIT V VCC = 5 V, VICR = MAX, See Note 5 VCC = MIN, VICR = 0, See Note 4 SN75117, SN75119 MAX -0.5 -0.5 VCC = 5 V, VICR = MAX, See Note 5 -1 -1 VID = - 1 V or 1 V, See Note 3 15 to -15 6 to 0 VCC = MIN, VICR = 0, VID = - 0.5 V, See Notes 4 and 6 2.4 24 24 2.4 VCC = 5 V, VICR = MAX, VID = - 1 V, See Note 5 2.4 2 4 24 2.4 VCC = MIN, VICR = 0, VID = 0.5 V, See Notes 4 and 7 04 0.4 04 0.4 VCC = 5 V, VICR = MAX, VID = 1 V, See Note 5 04 0.4 04 0.4 VI = 0, Other input at 0 V -0.5 -0.9 -0.5 -1 VI = 0.4 V, Other input at 2.4 V -0.4 -0.7 -0.4 -0.8 VI = 2.4 V, Other input at 0.4 V 0.1 0.3 0.1 0.4 V V V V mA Strobe VCC = MIN, Vstrobe = 4.5 V VID = - 0.5 V, '116 SN75117 '116, 5 5 A Enable VCC = MAX, VI = 5.5 V SN75118, SN75119 1 1 mA Unless otherwise noted, Vstrobe = 2.4 V. All parameters, with the exception of off-state open-collector output current, are measured with the active pullup connected to the sink output. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at V CC = 5 V, TA = 25C, and VIC = 0. Differential voltages are at the B input terminal with respect to the A input terminal. Neither receiver input of the SN75117 or SN75119 should be taken negative with respect to GND. The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for threshold voltages only. # Input voltage range is the voltage range that, if exceeded at either input, will cause the receiver to cease functioning properly. NOTES: 3. Measurement of these characteristics on the SN75117 and SN75119 requires the driver to be disabled with the driver enable at 0.8 V. 4. This applies with the less positive receiver input grounded. 5. For '116 and SN75118, this applies with the more positive receiver input at 15 V or the more negative receiver input at - 15 V. For SN75117 and SN75119, this applies with the more positive receiver input at 6 V. 6. For SN55116, VID = - 1 V 7. For SN55116, VID = 1 V SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS receiver section SLLS073D - MAY 1976 - REVISED MAY 1998 8 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) receiver section (continued) TEST CONDITIONS PARAMETER IIH High-level input current II Low-level Low level input current I(RTC) IO(off) VCC = MAX, VI = 2.4 V SN75118, SN75119 Strobe VCC = MAX, Vstrobe = 0.4 V, VID = 0.5 V, See Notes 4 and 7 Enable VCC = MAX, Response time control current (RTC) Response-time-control Off-state Off state open-collector open collector output current Off-state Off t t (hi (high-impedance-state) hi d t t ) output current MIN TYP SN75117, SN75119 MAX MIN TYP MAX 40 40 '116, '116 SN75117 -2.4 24 -2.4 24 VI = 0.4 V SN75118, SN75119 -1.6 -1.6 VCC = MAX, RC at 0 V, VID = 0.5 V, See Notes 4 and 7 TA = 25C VCC = MAX, VO = 12 V, VID = - 1 V TA = 25C VCC = MAX, VO = 0 to VCC, RE at 0.4 V TA = 25C -1.2 12 TA = MAX RT Line-terminating resistance VCC = 5 V IOS Sh t i it output Short-circuit t t currentt VCC = MAX, VID = - 0.5 V, ICC Short current (driver and receiver combined) VCC = MAX, VID = 0.5 V, See Notes 4 and 7 VO = 0, See Notes 4 and 6 1 mA 10 A 200 SN75116, SN75118 20 SN75118, SN75119 10 SN75118 20 10 A 20 SN75119 TA = 25C 77 167 TA = 25C -15 15 -80 80 TA = 25C A mA SN55116 TA = MAX UNIT 42 60 -15 15 42 -80 80 mA 60 mA Unless otherwise noted, Vstrobe = 2.4 V. All parameters, with the exception of off-state open-collector output current, are measured with the active pullup connected to the sink output. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at V CC = 5 V, TA = 25C, and VIC = 0. Not more than one output should be shorted at a time. NOTES: 4. This applies with the less positive receiver input grounded. 6. For SN55116, VID = - 1 V 7. For SN55116, VID = 1 V SLLS073D - MAY 1976 - REVISED MAY 1998 9 SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS * HOUSTON, * DALLAS, POST POST OFFICE OFFICE BOXBOX 1443655303 TEXAS TEXAS 77251-1443 75265 IOZ Enable '116, SN75118 SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 switching characteristics, VCC = 5 V, CL = 30 pF, TA = 25C receiver section PARAMETER TEST CONDITIONS tPLH Propagation-delay time, low-to-high-level output tPHL Propagation-delay time, high-to-low-level output tPZH Output-enable time to high level tPZL Output-enable time to low level tPHZ Output-disable time from high level tPLZ Output-disable time from low level SN75118 and SN75119 only l TYP MAX 20 75 UNIT ns 17 75 ns RL = 400 , See Figure 16 RL = 480 , See Figure 14 9 20 ns RL = 250 , See Figure 15 16 35 ns RL = 480 , See Figure 14 12 30 ns RL = 250 , See Figure 15 17 35 ns * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * MIN 11 SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 TYPICAL CHARACTERISTICS DRIVER DRIVER OUTPUT VOLTAGE vs INPUT VOLTAGE OUTPUT VOLTAGE vs INPUT VOLTAGE AAAA AAAA 6 AA AA VCC = 5 V No Load IIIII IIIII IIII IIII IIIII IIIII 5 VCC = 5.5 V 4 VO VO - Output Voltage - V VO VO - Output Voltage - V 5 IIIII AAAAA AAAAA IIIII 6 No Load TA = 25C VCC = 5 V VCC = 4.5 V 3 4 IIIIII IIIIII IIIII IIIII IIIII IIIII 3 TA = - 55C AAA AAA 2 1 2 TA = 25C 1 0 TA = 125C 0 0 1 2 3 0 4 1 VI - Input Voltage - V 2 Figure 2 DRIVER DRIVER HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT TA = 25C TA = 25C VOL VOL - Low-Level Output Voltage - V VOH V OH - High-Level Output Voltage - V IIII IIII 0.6 6 5 IIIII IIIIIIIII IIII VCC = 5.5 V 4 VCC = 5 V 3 VCC = 4.5 V 2 AA AA 1 0.5 IIIII VCC = 4.5 V 0.4 IIII IIII 0.3 VCC = 5.5 V 0.2 0.1 0 0 0 -20 -40 -60 -80 0 -100 20 40 50 80 100 120 IOL - Low-Level Output Current - mA IOH - High-Level Output Current - mA Figure 3 4 VI - Input Voltage - V Figure 1 AA AA 3 Figure 4 Operation of the device at these or any other conditions beyond those indicated under ``recommended operating conditions" is not implied. 12 * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 TYPICAL CHARACTERISTICS t pd - Propagation Delay Time - ns 18 16 14 12 10 DRIVER OUTPUT-ENABLE AND DISABLE TIME vs FREE-AIR TEMPERATURE AAAA IIII AAAA IIII AAAA IIII III III III III AAAAA AAAAA IIII AAAAA IIII III III III 30 VCC = 5 V CL = 30 pF See Figure 13 Output Enable and Disable Time - ns 20 DRIVER PROPAGATION-DELAY TIME vs FREE-AIR TEMPERATURE tPLH tPHL 8 6 4 VCC = 5 V See Note A 25 tPLZ III III 20 tPZL tPHZ 15 III III 10 tPZH 5 2 0 -75 -50 0 -25 25 50 75 100 0 -75 -50 125 RECEIVER OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE AAAAAAA AAAAAAA IIII IIII AAAAAAA VCC = 5.5 V VCC = 5 V Load = 2 k to VCC 5 VCC = 4.5 V VO VO - Output Voltage - V VO - Output Voltage - V VO 125 AAAAAA AAAAAA IIIIII IIIIIII AAAAAA IIIIIII IIII IIII 6 Load = 2 k to VCC TA = 25C 3 4 TA = 125C 3 IIII IIII AA AA IIII IIII 2 1 TA = 25C 2 TA = - 55C 1 -0.1 0 0.1 0 -0.2 0.2 -0.1 0 0.1 0.2 VID - Differential Input Voltage - V VID - Differential Input Voltage - V Figure 7 100 RECEIVER 4 0 -0.2 75 OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE VCC = 5 V AAA AAA 50 Figure 6 Figure 5 5 25 TA - Free-Air Temperature - C NOTE A: For tPZH and tPHZ: RL = 480 , see Figure 14. For tPZL and tPLZ: RL = 250 , see Figure 15. TA - Free-Air Temperature - C 6 0 -25 Figure 8 Operation of the device at these or any other conditions beyond those indicated under ``recommended operating conditions" is not implied. * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * 13 SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 TYPICAL CHARACTERISTICS RECEIVER RECEIVER OUTPUT-ENABLE AND DISABLE TIME vs FREE-AIR TEMPERATURE PROPAGATION-DELAY TIME vs FREE-AIR TEMPERATURE 25 IIII AAAAA AAAAA IIII IIIII AAAAAIII IIIII III 30 VCC = 5 V RL = 400 See Figure 16 Output Enable and Disable Time - ns t pd - Propagation Delay Time - ns 30 tPLH 20 II II tPHL 15 10 5 0 -75 -50 0 25 50 75 100 -25 TA - Free-Air Temperature - C AAAA AAAA IIII AAAA IIII VCC = 5 V See Note A 25 20 15 tPHZ 10 tPZH 5 0 -75 -50 0 25 50 75 100 125 -25 TA - Free-Air Temperature - C NOTE A: For tPZH and tPHZ :RL= 480 , see Figure 14. For tPZL and tPLZ: RL = 250 , see Figure 15. 125 Figure 10 AA AA DRIVER AND RECEIVER DRIVER AND RECEIVER SUPPLY CURRENT vs SUPPLY VOLTAGE SUPPLY CURRENT vs FREE-AIR TEMPERATURE IIIII AAAA IIII AAAA IIIII VCC = 5 V 45 40 60 50 40 AA AA AA 30 20 10 1 2 3 4 5 6 VCC - Supply Voltage - V 7 35 30 25 20 15 10 5 0 -75 -50 0 0 8 Figure 11 IIII 50 No Load TA = 25C IICC CC - Supply Current - mA IICC CC - Supply Current - mA 70 tPLZ tPZL Figure 9 80 III III III III III III 0 25 50 75 100 -25 TA - Free-Air Temperature - C 125 Figure 12 Operation of the device at these or any other conditions beyond those indicated under ``recommended operating conditions" is not implied. 14 * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * SN55116, SN75116, SN75117, SN75118, SN75119 DIFFERENTIAL LINE TRANSCEIVERS SLLS073D - MAY 1976 - REVISED MAY 1998 PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point From Output Under Test CL = 30 pF (see Note A) CL = 30 pF (see Note A) LOAD CIRCUIT 5 ns LOAD CIRCUIT 5 ns 3V 90% 1.5 V 10% 10% Input 0V tPHL tPLH 1.5 V 10% VOH Output tPHL 1.5 V VOH 1.5 V 1.5 V VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS tPLH and tPHL (drivers only) tPZH and tPHZ Figure 13 Figure 14 5V CL = 30 pF (see Note A) Test Point From Output Under Test RL = 400 CL = 30 pF (see Note A) LOAD CIRCUIT See Note B LOAD CIRCUIT 5 ns 5 ns 90% 1.5 V 3V 10% 5 ns B Input (see Note C) 10% 0V tPZL 5 ns VH 90% 50% 90% 50% 10% tPHL tPLZ Output 5V Test Point RL = 250 From Output Under Test 90% 1.5 V 0.5 V Voff = 0 V tPHZ VOL Input 10% 0V tPZH VOL AND Output 3V 90% 1.5 V 90% 1.5 V 1.5 V tPLH 5 ns 10% VOH NAND Output RL = 180 5 ns 90% 1.5 V Input Test Point Voff = 5 V 0.5 V 1.5 V 1.5 V Output See Note C VL tPLH VOH 1.5 V VOL VOL VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS tPZL and tPLZ (SN75118 and SN75119 receivers only) tPLH and tPHL (receivers only) Figure 16 Figure 15 NOTES: A. CL includes probe and jig capacitance. B. All diodes are 1N3064 or equivalent. C. For '116 and SN75118, VH = 3 V, VL = - 3 V, the A input is at 0 V. For SN75117 and SN75119, VH = 3 V, VL = 0, the A input is at 1.5 V. D. When testing the '116 and SN75118 receiver sections, the response-time control and the termination resistor pins are left open. * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * 15 PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-8851101EA ACTIVE CDIP J 16 1 TBD Call TI Call TI Call TI Call TI SN55116J OBSOLETE CDIP J 16 SN75116D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75116DE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75116DG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75116N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75116NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75116NSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75116NSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75116NSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75117D OBSOLETE SOIC D 8 SN75117P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75117PE4 ACTIVE PDIP P 8 SN75118D OBSOLETE SOIC D 16 TBD TBD Call TI Call TI Call TI Call TI SN75118N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75118NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75119D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN75119DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN75119DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN75119DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Addendum-Page 1 Samples (Requires Login) 5962-88511012A TBD (3) PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) SN75119DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN75119DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR SN75119P ACTIVE PDIP P 8 50 Pb-Free (RoHS) SN75119PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SNJ55116FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type SNJ55116J ACTIVE CDIP J 16 1 TBD CU NIPDAU N / A for Pkg Type A42 N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN55116, SN75116 : Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 * Catalog: SN75116 * Military: SN55116 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Military - QML certified for Military and Defense Applications Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN75116NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 SN75119DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN75116NSR SO NS 16 2000 367.0 367.0 38.0 SN75119DR SOIC D 8 2500 340.5 338.1 20.6 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated