P16S, PA16S
www.vishay.com Vishay Sfernice
Revision: 04-Jul-17 1Document Number: 51063
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Knob Potentiometer with Switch
The P16S is a revolutionary concept in panel mounted
potentiometers. This unique design consists of a knob
driving and incorporating a cermet potentiometer. Only the
mounting hardware and terminals are situated on the back
side of the panel reducing to a minimum the required
clearance.
FEATURES
•P16S - version for military, professional and
industrial applications (cermet): 1 W at 40 °C
•PA16S - version for professional audio
applications (conductive plastic): 0.5 W at 40 °C
• Compact (integrated)
• Detent and electric cut off at beginning of travel
• Fully sealed and panel sealed
• Metallic or plastic knob options
• Custom knob on request
• Test according to CECC 41000 or IEC 60393-1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Multiple module No
Switch module Yes
Detent module Yes
Special electrical laws A: linear, L: logarithmic, F: reverse
logarithmic
Sealing level IP 67
Lifespan 10K cycles (switch), 50K cycles (track)
DIMENSIONS in millimeters (± 0.5 mm)
P16SNP P16SNM PANEL CUTOUT
Panel sealing ring
Thickness nut 2 mm
washer 1.5 mm
Thread M10 x 0.75
12 wrench
9.6
8.8
13.5 ± 1
15.5 ± 1
7.2
Panel sealing ring
Thickness nut 2 mm
washer 1.5 mm
Thread M10 x 0.75
12 wrench
10.2
9.4
7.2
13.5 ± 1
15.5 ± 1
ø 10
+ 0.1
+ 0
8.1
+ 0.1
+ 0
Panel thickness max.: 3 mm
3 terminals
0.3
8
c
30
a
1.8
b
Reference mark
Ø 16
P16S, PA16S
www.vishay.com Vishay Sfernice
Revision: 04-Jul-17 2Document Number: 51063
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL SPECIFICATIONS
P16S PA16S
Resistive element Cermet Conductive plastic
Electrical travel 220° ± 10° 220° ± 10°
Power rating chart
Circuit diagram
Taper
Resistance range linear law 22 Ω to 10 MΩ1 kΩ to 1 MΩ
logarithmic laws 100 Ω to 2.2 MΩ470 Ω to 500 kΩ
Standard series e3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 1 - 2.2 - 4.7
Tolerance standard ± 20 % ± 20 %
on request ± 10 % ± 10 % (1 kΩ to 100 kΩ)
Power rating linear 1 W at +40 °C 0.5 W at +40 °C
logarithmic 0.5 W at +40 °C 0.25 W at +40 °C
Temperature coefficient (typical) ± 150 ppm ± 500 ppm
Dielectric strength (RMS) 2500 V 2500 V
Limiting element voltage (linear law) 350 V 350 V
Contact resistance variation 3 % Rn or 3 Ω2 % Rn or 3 Ω
End resistance (typical) 1 Ω1 Ω
Insulation resistance (500 VDC)10
6 MΩ106 MΩ
0 40 140
0.50
0
AMBIENT TEMPERATURE IN °C
RETED POWER IN W
60 20 100
80
P16S
LIN. TAPER “A”
P16S
LOG. TAPER “L & F”
1.00
NM
NM
0.75
1.25
0.25
120
NP
NM
NP
NP
& PA16S
LIN. TAPER
PA16S
LOG. TAPER
ac
b
cw
(2)
(3)
(1)
100
80
60
40
20
0
0 10080604020
% CLOCKWISE KNOB ROTATION
% TOTAL RESISTANCE
F
L
A
10
Switch on-off
P16S, PA16S
www.vishay.com Vishay Sfernice
Revision: 04-Jul-17 3Document Number: 51063
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Nothing stated herein shall be construed as a guarantee of quality or durability
MECHANICAL SPECIFICATIONS
Mechanical travel 300° ± 5°
Operating torque 2 Ncm typical
End stop torque 25 Ncm maximum
Tightening torque of mounting nut 180 Ncm maximum
Unit weight 4.5 g typical
ENVIRONMENTAL SPECIFICATIONS
METALLIC KNOB PLASTIC KNOB
Temperature range -40 °C to +125 °C -40 °C to +85 °C
Climatic category 40/100/56 40/85/56
Sealing Sealed container and panel sealed
Protection grades IP67
SWITCH ELECTRICAL AND MECHANICAL SPECIFICATIONS
ON / OFF switch Actuation in counter clockwise position (between terminal a and terminal b)
Switching current P16S 100 mA max.
PA16S 1 mA max.
Switch actuation torque 4 Ncm min.
Switch actuation travel 30° ± 5°
Dielectric strength
terminal to terminal (RMS) 1000 V
Insulation resistance between contacts 106 MΩ
Switch mechanical endurance 10 000 cycles
1 cycle ON-OFF-ON
MARKING
• Ohmic value code, tolerance, code and taper
• Manufacturing date code
PACKAGING
• Carton box of 20 pieces
CONTROL KNOB
Black metallic knob (NM).
Black plastic knob (NP).
For white and blue color see ordering information.
Other dimensions, shapes, colors of control knobs are
manufactured on request - please consult Vishay.
Other reference marks (shapes, colors) and legends can be
printed on plastic knob on request - please consult Vishay.
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
P16S CERMET PA16S CONDUCTIVE PLASTIC
LINEAR TAPER LOGARITHMIC TAPER LINEAR TAPER LOGARITHMIC TAPER
MAX.
POWER
AT 40 °C
MAX.
VOLTAGE
MAX. CUR.
THROUGH
WIPER
MAX.
POWER
AT 40 °C
MAX.
VOLTAGE
MAX. CUR.
THROUGH
WIPER
MAX.
POWER
AT 40 °C
MAX.
VOLTAGE
MAX. CUR.
THROUGH
WIPER
MAX.
POWER
AT 40 °C
MAX.
VOLTAGE
MAX. CUR.
THROUGH
WIPER
Ω
WV mAWV mAWV mAWV mA
22 1 4.69 213
47 1 6.85 146
100 1 10 100 0.5 7.1 71
220 1 14.8 67.4 0.5 10.5 48
470 1 21.7 46.1 0.5 15.3 32.6 0.25 10.8 23.1
1K 1 31.6 31.6 0.5 22.4 22.4 0.5 22.4 22.4 0.25 15.8 16
2.2K 1 46.9 21.3 0.5 33.2 15.1 0.5 33.2 15.1 0.25 23.5 11
4.7K 1 68.5 14.6 0.5 48.5 10.3 0.5 48.5 10.3 0.25 34.3 7
10K 1 100 10 0.5 70.7 7.07 0.5 70.7 7.07 0.25 50 5
22K 1 148 6.74 0.5 105 4.77 0.5 105 4.77 0.25 74 3.4
47K 1 217 4.61 0.5 153 3.26 0.5 153 3.26 0.25 108 2.3
100K 1 316 3.16 0.5 224 2.24 0.5 224 2.24 0.25 158 1.6
220K 0.56 350 1.59 0.5 332 1.51 0.5 332 1.51 0.25 235 1.1
470K 0.26 350 0.75 0.26 350 0.74 0.26 350 0.74 0.25 343 0.7
1M 0.12 350 0.35 0.12 350 0.35 0.12 350 0.35
2.2M 0.05 350 0.16 0.056 350 0.16
4.7M 0.02 350 0.07
10M 0.01 350 0.012
P16S, PA16S
www.vishay.com Vishay Sfernice
Revision: 04-Jul-17 4Document Number: 51063
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PERFORMANCE
TESTS CONDITIONS TYPICAL VALUES AND DRIFTS
ΔRT/RT (%) ΔR1-2/R1-2 (%) OTHER
Electrical endurance 1000 h at rated power
90'/30' cycle at +40 °C ± 5 % - Insulation resistance: > 104 MΩ
Contact res. variation: < 2 % Rn
Damp heat, steady state 56 days
40 °C, 93 % HR ± 2 % ± 1 % Insulation resistance: > 104 MΩ
Mechanical endurance 50000 cycles ± 5 % - Contact res. variation: < 2 % Rn
Shock
50 g‘s at 11 ms
3 successive shocks
in 3 dimensions
± 0.2 % ± 0.5 % -
Vibration
10 Hz to 55 Hz
0.75 mm or 10 g‘s
during 6 h
± 0.2 % - ΔV1-2/ΔV1-3 ≤ ± 0.5 %
ORDERING INFORMATION
P16SNP223MAB15
MODEL STYLE OHMIC
VALUE TOLERANCE TAPER PACKAGING
CODE
SPECIAL
NUMBER
P16S =
cermet
PA16S =
conductive
plastic
NM: metallic black
NP: plastic black
WM: metallic white
WP: plastic white
BP: plastic blue
223 = 22 kΩ
for ohmic value
range see
electrical
specification
M = ± 20 %
On request:
K = ± 10 %
A: linear
L: clockwise logarithmic
F: inverse clockwise
logarithmic
B15 =
Box of
20 pieces
(If applicable)
Given by
Vishay
for custom
design
PART NUMBER DESCRIPTION (for information only)
P16S NP 22 kΩ20 % A BO20 e3
MODEL STYLE OHMIC
VALUE TOLERANCE TAPER SPECIAL PACKAGING SPECIAL LEAD
(Pb)-FREE
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers www.vishay.com/doc?51001
Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
