www.fairchildsemi.com MC78MXX/LM78MXX 3-Terminal 0.5A Positive Voltage Regulator Features Description * * * * * The MC78MXX/LM78MXX series of three-terminal positive regulators are available in the TO-220/D-PAK package with several fixed output voltages making it useful in a wide range of applications. Output Current up to 0.5A Output Voltages of 5, 6, 8, 12, 15, 18, 24V Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area (SOA)Protection TO-220 GND 1 D-PAK GND 1 1. Input 2. GND 3. Output Internal Block Digram INPUT SERIES PASS ELEMENT 1 SOA PROTECTION CURRENT GENERATOR STARTING CIRCUIT REFERENCE VOLTAGE OUTPUT 3 R1 ERROR AMPLIFIER R2 THERMAL PROTECTION GND 2 Rev. 1.0.6 (c)2009 Fairchild Semiconductor Corporation MC78MXX/LM78MXX Absolute Maximum Ratings Parameter Symbol Value Unit VI VI 35 40 V V Thermal Resistance Junction-Case (Note1) TO-220 (Tc = +25C) RJC 2.5 C/W Thermal Resistance Junction-Air (Note1, 2) TO-220 (Ta = +25C) D-PAK (Ta = +25C) RJA 66 92 C/W Operating Junction Temperature Range TOPR 0 ~ +150 C Storage Temperature Range TSTG -65 ~ +150 C Input Voltage (for VO = 5V to 18V) (for VO = 24V) Note: 1. Thermal resistance test board Size: 76.2mm * 114.3mm * 1.6mm(1S0P) JEDEC standard: JESD51-3, JESD51-7 2. Assume no ambient airflow Electrical Characteristics (MC78M05/LM78M05) (Refer to the test circuits, 0 < TJ < +125C, IO=350mA, VI=10V, unless otherwise specified, CI = 0.33F, CO=0.1F) Parameter Min. Typ. Max. TJ = +25C 4.8 5 5.2 IO = 5mA to 350mA VI = 7V to 20V 4.75 5 5.25 VI = 7V to 25V - - 100 VI = 8V to 25V - - 50 IO = 5mA to 0.5A, TJ =+25C - - 100 IO = 5mA to 200mA, TJ =+25 C - - 50 TJ =+25C - 4.0 6.0 IO = 5mA to 350mA - - 0.5 IO = 200mA VI = 8V to 25V - - 0.8 IO = 5mA TJ = 0 to +125C - -0.5 - mV/C VN f = 10Hz to 100kHz - 40 - V/Vo Ripple Rejection RR f = 120Hz, IO = 300mA VI = 8V to 18V, TJ =+25 C - 80 - dB Dropout Voltage VD TJ =+25C, IO = 500mA - 2 - V Short Circuit Current ISC TJ =+25C, VI = 35V - 300 - mA Peak Current IPK TJ =+25C - 700 - mA Output Voltage Symbol VO Line Regulation (Note3) VO Load Regulation (Note3) VO Quiescent Current Quiescent Current Change Output Voltage Drift Output Noise Voltage IQ IQ V/T Conditions IO = 200mA TJ =+25C Unit V mV mV mA mA Note: 3. Load and line regulation are specified at constant junction temperature. Change in Vo due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2 MC78MXX/LM78MXX Electrical Characteristics (MC78M06) (Continued) (Refer to the test circuits, 0 < TJ < +125C, IO=350mA, VI =11V, unless otherwise specified, CI=0.33F, CO=0.1F) Parameter Output Voltage Symbol VO Conditions Min. Typ. Max. TJ = +25C 5.75 6 6.25 IO = 5mA to 350mA VI = 8V to 21V 5.7 6 6.3 Unit V VI = 8V to 25V - - 100 VI = 9V to 25V - - 50 IO = 5mA to 0.5A, TJ = +25C - - 120 IO = 5mA to 200mA, TJ = +25C - - 60 TJ = +25C - 4.0 6.0 IO = 5mA to 350mA - - 0.5 IO = 200mA VI = 9V to 25V - - 0.8 IO = 5mA TJ = 0 to +125C - -0.5 - mV/C VN f = 10Hz to 100kHz - 45 - V/Vo Ripple Rejection RR f = 120Hz, IO = 300mA VI = 9V to 19V, TJ =+25 C - 80 - dB Dropout Voltage VD TJ =+25C, IO = 500mA - 2 - V Short Circuit Current ISC TJ = +25C, VI= 35V - 300 - mA Peak Current IPK TJ =+25C - 700 - mA Line Regulation (Note1) VO Load Regulation (Note1) VO Quiescent Current Quiescent Current Change Output Voltage Drift Output Noise Voltage IQ IQ V/T IO = 200mA TJ = +25C mV mV mA mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in Vo due to heating effects must be taken into account separately. Pulse testing with low duty is used. 3 MC78MXX/LM78MXX Electrical Characteristics (MC78M08) (Continued) (Refer to the test circuits, 0 < TJ < +125C, IO=350mA, VI=14V, unless otherwise specified, CI = 0.33F, CO=0.1F) Parameter Output Voltage Symbol VO Line Regulation (Note1) VO Load Regulation (Note1) VO Quiescent Current IQ Conditions Min. Typ. Max. TJ =+25C 7.7 8 8.3 IO = 5mA to 350mA VI = 10.5V to 23V 7.6 8 8.4 VI = 10.5V to 25V - - 100 VI = 11V to 25V - - 50 IO = 5mA to 0.5A, TJ =+25C - - 160 IO = 5mA to 200mA, TJ =+25C - - 80 TJ = +25C - 4.0 6.0 IO = 5mA to 350mA - - 0.5 IO = 200mA VI = 10.5V to 25V - - 0.8 IO = 5mA TJ = 0 to +125C - -0.5 - mV/C IO = 200mA TJ =+25C Unit V mV mV mA Quiescent Current Change IQ Output Voltage Drift RR Output Noise Voltage VN f = 10Hz to 100kHz - 52 - V/Vo Ripple Rejection RR f = 120Hz, IO = 300mA VI = 11.5V to 21.5V, TJ =+25 C - 80 - dB Dropout Voltage VD TJ = +25C, IO = 500mA - 2 - V Short Circuit Current ISC TJ = +25C, VI = 35V - 300 - mA Peak Current IPK TJ = +25C - 700 - mA mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 4 MC78MXX/LM78MXX Electrical Characteristics (MC78M12) (Continued) (Refer to the test circuits, 0 < TJ < +125C, IO=350mA, VI=19V, unless otherwise specified, CI =0.33F, CO=0.1F) Parameter Output Voltage Symbol VO Line Regulation (Note1) VO Load Regulation (Note1) VO Quiescent Current IQ Conditions Min. Typ. Max. TJ = +25C 11.5 12 12.5 IO = 5mA to 350mA VI = 14.5V to 27V 11.4 12 12.6 VI = 14.5V to 30V - - 100 VI = 16V to 30V - - 50 IO = 5mA to 0.5A, TJ = +25C - - 240 IO = 5mA to 200mA, TJ = +25C - - 120 TJ =+25C - 4.1 6.0 IO = 200mA TJ = +25C Unit V mV mV mA IO = 5mA to 350mA - - 0.5 IQ IO = 200mA VI = 14.5V to 30V - - 0.8 V/T IO = 5mA TJ = 0 to +125C - -0.5 - mV/C VN f = 10Hz to 100kHz - 75 - V/Vo Ripple Rejection RR f = 120Hz, IO = 300mA VI = 15V to 25V, TJ =+25 C - 80 - dB Dropout Voltage VD TJ =+25C, IO = 500mA - 2 - V Short Circuit Current ISC TJ = +25C, VI = 35V - 300 - mA Peak Current IPK TJ = +25C - 700 - mA Quiescent Current Change Output Voltage Drift Output Noise Voltage mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in Vo due to heating effects must be taken into account separately. Pulse testing with low duty is used. 5 MC78MXX/LM78MXX Electrical Characteristics (MC78M15) (Continued) (Refer to the test circuits, 0 < TJ < +125C, IO=350mA, VI=23V, unless otherwise specified, CI =0.33F, CO=0.1F) Parameter Output Voltage Symbol VO Line Regulation (Note1) VO Load Regulation (Note1) VO Quiescent Current IQ Conditions Min. Typ. Max. TJ = +25C 14.4 15 15.6 IO = 5mA to 350mA VI = 17.5V to 30V 14.25 15 15.75 VI = 17.5V to 30V - - 100 VI = 20V to 30V - - 50 IO = 5mA to 0.5A, TJ =+25C - - 300 IO = 5mA to 200mA, TJ =+25C - - 150 TJ = +25C - 4.1 6.0 IO = 200mA TJ =+25C Unit V mV mV mA IO = 5mA to 350mA - - 0.5 IQ IO = 200mA VI = 17.5V to 30V - - 0.8 V/T IO = 5mA TJ = 0 to +125C - -1 - mV/C VN f = 10Hz to 100kHz - 100 - V/Vo Ripple Rejection RR f = 120Hz, IO = 300mA VI = 18.5V to 28.5V, TJ =+25 C - 70 - dB Dropout Voltage VD TJ =+25C, IO = 500mA - 2 - V Short Circuit Current ISC TJ = +25C, VI = 35V - 300 - mA Peak Current IPK TJ = +25C - 700 - mA Quiescent Current Change Output Voltage Drift Output Noise Voltage mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 6 MC78MXX/LM78MXX Electrical Characteristics (MC78M18) (Continued) (Refer to the test circuits, 0 < TJ < +125C, IO=350mA, VI=26V, unless otherwise specified, CI =0.33F, CO=0.1F) Parameter Output Voltage Symbol VO Line Regulation (Note1) VO Load Regulation (Note1) V Quiescent Current Quiescent Current Change Output Voltage Drift IQ IQ V/T Conditions Min. Typ. Max. TJ = +25C 17.3 18 18.7 IO = 5mA to 350mA VI = 20.5V to 33V 17.1 18 18.9 Unit V VI = 21V to 33V - - 100 VI = 24V to 33V - - 50 IO = 5mA to 0.5A, TJ = +25C - - 360 IO = 5mA to 200mA, TJ = +25C - - 180 TJ = +25C - 4.2 6.0 IO = 5mA to 350mA - - 0.5 IO = 200mA VI = 21V to 33V - - 0.8 IO = 5mATJ = 0 to 125C - -1.1 - mV/C IO = 200mA TJ = +25C mV mV mA mA Output Noise Voltage VN f = 10Hz to 100kHz - 100 - V/Vo Ripple Rejection RR f = 120Hz, IO= 300mA , VI = 22V to 32V TJ =+25 C - 70 - dB Dropout Voltage VD TJ = +25C, IO = 500mA - 2 - V Short Circuit Current ISC TJ = +25C, VI = 35V - 300 - mA Peak Current IPK TJ = +25C - 700 - mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 7 MC78MXX/LM78MXX Electrical Characteristics (MC78M24) (Continued) (Refer to the test circuits, 0 < TJ < +125C, IO=350mA, VI=33V, unless otherwise specified, CI =0.33F, CO=0.1F) Parameter Symbol Conditions TJ =+25C Output Voltage VO Line Regulation (Note1) VO Load Regulation (Note1) VO Quiescent Current IQ IO = 5mA to 350mA VI = 27V to 38V Min. Typ. Max. 23 24 25 22.8 24 25.2 IO = 200mA VI = 27V to 38V TJ =+25C VI = 28V to 38V - - 100 - - 50 IO = 5mA to 0.5A, TJ =+25C - - 480 IO = 5mA to 200mA, TJ =+25C - - 240 TJ = +25C - 4.2 6.0 Unit V mV mV mA IO = 5mA to 350mA - - 0.5 IQ IO = 200mA VI = 27V to 38V - - 0.8 V/T IO = 5mA TJ = 0 to +125C - -1.2 - mV/C VN f = 10Hz to 100kHz - 170 - V/Vo Ripple Rejection RR f = 120Hz, IO = 300mA VI = 28V to 38V, TJ =+25 C - 70 - dB Dropout Voltage VD TJ = +25C, IO = 500mA - 2 - V Short Circuit Current ISC TJ = +25C, VI = 35V - 300 - mA Peak Current IPK TJ = +25C - 700 - mA Quiescent Current Change Output Voltage Drift Output Noise Voltage mA Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 8 MC78MXX/LM78MXX Typical Applications 1 VI CI 3 MC78MXX LM78MXX VO 2 CO 0.3F 0.1F Figure 1. Fixed Output Regulator 1 VI CI 3 MC78MXX LM78MXX 2 0.33F CO VXX 0.1F IO IO R1 Vxx IO = R1 +IO Figure 2. Constant Current Regulator Notes: 1. To specify an output voltage, substitute voltage value for "XX" 2. Although no output capacitor is needed for stability, it does improve transient response. 3. CI is required if regulator is located an appreciable distance from power Supply filter 1 VI CI MC78MXX LM78MXX 2 0.33F IO 3 CO VO VXX R1 0.1F IR1 5IO VO = VXX (1+R2/R1) +IOR2 R2 Figure 3. Circuit for Increasing Output Voltage 9 MC78MXX/LM78MXX 1 VI MC78M05 LM78M05 3 VO 2 CI CO 0.33F 2 7 6 0.1F LM741 3 10k 4 Figure 4. Adjustable Output Regulator (7 to 30V) 13V < VI < 25V 1 VI MC78M05 LM78M05 3 VO 2 C1 0.33F VXX R4 910 R5 9.1k 6 -7 < -VI < 17V 4 Figure 5. 0.5 to 10V Regulator 10 C2 7 _ 2 LM741 + 3 R3 R1 0.1F 10k VO = Vxx R4 R1 MC78MXX/LM78MXX Mechanical Dimensions Package Dimensions in millimeters TO-220 [ SINGLE GAUGE ] 11 MC78MXX/LM78MXX Mechanical Dimensions (Continued) Package Dimensions in millimeters D-PAK MIN0.55 0.91 0.10 9.50 0.30 0.50 0.10 0.76 0.10 0.50 0.10 1.02 0.20 2.30TYP [2.300.20] (3.05) (2XR0.25) (0.10) 2.70 0.20 6.10 0.20 9.50 0.30 0.76 0.10 12 (1.00) 6.60 0.20 (5.34) (5.04) (1.50) (0.90) 2.30 0.20 (0.70) 2.30TYP [2.300.20] (0.50) 2.30 0.10 0.89 0.10 MAX0.96 (4.34) 2.70 0.20 0.80 0.20 0.60 0.20 (0.50) 6.10 0.20 5.34 0.30 0.70 0.20 6.60 0.20 MC78MXX/LM78MXX Ordering Information Product Number Package Operating Temperature LM78M05CT TO-220 0 ~ +125C Product Number Package Operating Temperature MC78M05CT MC78M06CT MC78M08CT MC78M12CT TO-220 MC78M15CT 0 ~ +125C MC78M18CT MC78M24CT MC78M05CDT MC78M06CDT MC78M08CDT D-PAK MC78M12CDT 13 MC78MXX/LM78MXX DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 7/3/09 0.0m 001 Stock#DS400020 (c) 2009 Fairchild Semiconductor Corporation