Feedthroughs 207W213 to 256 Two-Part Feedthrough After Unrestricted Recovery (b) As Supplied (a) J Dia. S U Tan JO H M J Dia. J Dia. JW Slight taper B nut (-01 modification) A nut (standard) S U 4 Tan JO 207W213 to 256 S H J Dia. U Tan JO JW B nut (-01 modification) Molded Parts M Slight taper M H J Dia. A nut (standard) JW Applications Slight taper B nut (-01 modification) Use for strain relief and abrasion protection when cables pass through equipment boxes or panels. 207W213 to 256 A nut (standard) 207W213 to 256 Materials Available Material Dash Number Material Description Precoating No. -3 Semirigid polyolefin /42 or /86 -4 Flexible polyolefin /42 or /86 -12 Viton(R) N/A -25 Fluid-resistant elastomer /42 or /86 or /225 -100 Polyolefin, Zerohal /86 or /180 *For more information, please see the appropriate material page in this section. Adhesive Part No. S-1017 or S-1048 S-1017 or S-1048 S-1255-04 S-1017 or S-1048 or S-1125 S-1048 or S-1030 **For more information, please see section 5. Product Dimensions Part No. H Ref. b 207W213 207W223 207W234 207W245 207W256 11.9 [.47] 20.1 [.79] 30.1 [1.22] 45.0 [1.77] 68.1 [2.68] J Min. -3, -4, -12, Max. -100 -25 b a a 9.9 [.39] 8.5 [.33] 4.1 [.16] 18.0 [.71] 16.5 [.65] 7.1 [.28] 27.9 [1.10] 26.5 [1.04] 11.9 [.47] 41.9 [1.65] 40.5 [1.59] 18.0 [.71] 64.0 [2.52] 64.5 [2.54] 30.0 [1.18] JO Max. b M Thread b P 10% b 15.2 [.60] 19.3 [.76] 26.9 [1.06] 32.0 [1.26] 39.1 [1.54] 20.1 [.79] 30.0 [1.18] 41.9 [1.65] 55.9 [2.20] 80.0 [3.15] 62.0 [2.44] 71.9 [2.83] 87.1 [3.43] 102.1 [4.02] 121.9 [4.80] R 10% b 49.0 [1.93] 58.9 [2.32] 73.9 [2.91] 88.9 [3.50] 109.0 [4.29] S 10% b U 10% b JW 20% b Hole Dia. .51 [.02] 13.0 [.51] 16.0 [.63] 18.0 [.71] 18.0 [.71] 18.0 [.71] 9.9 [.39] 9.9 [.39] 9.9 [.39] 9.9 [.39] 9.9 [.39] 1.3 [.05] 1.8 [.07] 2.03 [.08] 3.05 [.12] 3.05 [.12] 23.9 [.94] 34.0 [1.34] 47.0 [1.85] 60.5 [2.38] 85.1 [3.35] Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max. VITON is a trademark of DuPont Performance Elastomers 4-75 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171