CMX Series * SIP SSR * Ratings to 20A @ 60 VDC, 10A @ 100 VDC, 10A @ 60 VDC and 3A @ 200 VDC * MOSFET output * DC control * Low on-state impedance * CE Compliant to EN60950-1 PRODUCT SELECTION Control Voltage 3A 5A 6A 10A 10A 20A 3-10 VDC CMX200D3 CMX60D5 CMX100D6 CMX60D10 CMX100D10 CMX60D20 20-28 VDC CMXE200D3 CMXE60D5 CMXE100D6 CMXE60D10 CMXE100D10 CMXE60D20 0-200 0-60 0-100 0-60 0-100 0-60 100 100 100 100 (5) 100 100 Maximum Load Current [Arms] 3 5 6 10 10 20 Minimum Load Current [Arms] 0 0 0 0 0 0 0.20 .10 .040 .018 .010 .0033 OUTPUT SPECIFICATIONS (1)(4) Description Operating Voltage [VDC] Maximum Off-State Leakage Current @ Rated Voltage [Adc] Maximum On-State Resistence [Ohm] (2) Maximum Surge Current (10msec) [Apk] 30 60 100 100 100 200 Maximum On-State Voltage Drop @ Rated Current [VDC] 0.6 0.5 0.24 0.18 0.1 0.1 INPUT SPECIFICATIONS (1) Description Control Voltage Range CMX CMXE 3.0-10.0 VDC 20-28 VDC Must Turn On Voltage 3.0 VDC 20 VDC Must Turn Off Voltage 1 .0 VDC 1 .0 VDC Typycal Input Current 15 mAdc @ 5 VDC 12 mAdc @ 24 VDC 300 Ohm 780 Ohm Nominal Input Impedance Maximum Turn-On Time [msec] 1.0 1.0 Maximum Turn-Off Time [sec] 300 300 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz)(3) 2500 Vrms Minimum Insulation Resistance (@ 500 VDC)(3) 109 Ohm Maximum Capacitance, Input/Output 15 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125C Weight (typical) Encapsulation 1) All parameters at 25C unless otherwise specified. 2) @ rated current (RDS-ON) 3) Dielectric and insulation resistance are measured between input and output 4) Inductive loads should be diode suppressed 5) At 55 Vdc 0.4 oz. (11g) Thermally Conductive Epoxy MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: E116950(3 Amps, 6 Amps and 10 Amps Models) Rev. 120911 ANNEX - ENVIROMENTAL INFORMATION