2842/7-GR001 - ALPHA - Datasheet.World

Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277

TIG

Rocker Switches

TIL, TIG, TIH, TII-Series

Dimensional Specifications: in. [mm]

SERIES

TIL SINGLE POLE

TIG DOUBLE POLE

TIH THREE POLE

TII FOUR POLE

ACTUATOR COLOR3

BL BLACK

WH WHITE

BRACKET STYLE4

FN NARROW

FW WIDE

MBL MARINE

NBL

WBL WATERSHEDDING

RATING1

510A 250VAC

15A 125VAC

3/4HP 125-250VAC

63A 250VAC

6A 125VAC

1/4HP 125-250VAC

910A 250VAC

15A 125VAC

12(6)A 250VAC T85

72 20A 125-277VAC

1 1/2HP 125VAC

2HP 250VAC

ACTUATOR STYLE2

1C CROSS SERRATED

1F SMOOTH W/

FLATTED CENTER

1L LONG LINED

1S SMOOTH ANGLED

2L LONG NARROW

SMOOTH

6M5MATTE CURVED

(M, N OR W

BRACKETS ONLY)

6S SMOOTH CURVED

(M, N OR W

BRACKETS ONLY)

7N WITCHES HAT

(NARROW)

7P WITCHES HAT

7S TOGGLE

CIRCUIT

SINGLE POLE

AON-NONE-OFF

BON-NONE-ON

CON-OFF-ON

DOUBLE, THREE OR

FOUR POLE

KON-NONE-OFF

LON-NONE-ON

MON-OFF-ON

The TI-Series Tippette rocker switches

are available in single pole (TIL), double

pole (TIG), three pole (TIH) and four pole

(TII) versions. These switches are

available with nylon snap-in or screw-

type mounting brackets, are AC rated to

20 amps and suitable for low voltage DC

applications. Multiple actuator options

and colors are available, and many

circuits have international approvals.

Specifications

•Certifications*: UL, CSA, and VDE

•Dielectric Strength: 1,000 V (minimum)

•Insulation Resistance: 100 Megohms

(minimum)

•Base Material: Phenolic

•Actuator Material: Nylon

•Bracket/Bezel Material: Nylon or Steel

* Due to ongoing technological advances, consult factory for

certification specifics.

TERMINATION/FUNCTION

SOLDER .250 TAB .187 TAB SCREW WIRE PC

FUNCTION LUG (QC) (QC) TERM. LEAD TERM.

ON-NONE-OFF 013 456

(ON)-NONE-OFF ABD EFG

ON-NONE-(OFF) LMR STU

ON-NONE-ON 013 456

ON-NONE-(ON) ABD EFG

ON-OFF-ON 013 456

ON-OFF-(ON) ABD EFG

(ON)-OFF-(ON) LMR STU

K5 1 6S

-BL NBL

TIH

.760[19.30]

.305[7.75]

TIL

1.034[26.26]

.345[8.76]

.601[15.26] .750[19.05]

.422[10.72]

.762[19.35]

1.348[34.24]

TIG

1.350[34.29]

1.088[27.63]

1.306[33.17]

NOTES:

Shading indicates standard configurations.

Dust covers for single and double pole are available, consult factory.

Panel Cut-Out Recommendations: For sheet metal panels, switch must enter

panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual

material.

1 Horsepower rating for code 5 is applicable to certain circuits only.

Consult factory for specifics.

Rating Code 9 for TIG-Series only with maintained A, B, K, L and M

Circuits, and N Bracket Style, terminals 0 or 1 only.

Rating Code 72 for TIG-Series only, in maintained circuits, with N or W

Bracket Style only.

2 For double actuator with or without interlock or other actuator

styles,consult factory.

Imprinting available on smooth face rockers.

3 Glossy finish is standard. Custom colors are available. Consult factory.

4 Barbs are available on FN style bracket to accommodate panel

thicknesses of .062, .100, .125, .156 and .250. Specify after bracket

selection. (ex.) FN/.125

MBL, NBL & WBL brackets are molded in black. If white is desired,

specify as MWH, NWH & WWH.

Bracket Styles D, E and G available. Consult factory.

Bracket Style M consists of LNP rocker, neoprene seal, syntech grease,

dummy rivets. M, N and W brackets supplied in two pole bases.

MBL does not have UL, CSA approvals.

Bracket style H available with actuator styles 7N and 7P only.

5 Actuator & Bracket Finish is a matched set.

Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277

Rocker Switches

Special Circuits for Tippette Rocker Switches

CIRCUIT POSITION 1 POSITION 2 POSITION 3

PROGRESSIVE TWO CIRCUIT

GG BOTH CIRCUITS ON ONE CIRCUIT ON OFF

GG BOTH CIRCUITS (ON) ONE CIRCUIT ON OFF

SINGLE POLE TRIPLE THROW

GE ON ON ON

TWO CIRCUIT

GH CIRCUIT 1 ON BOTH CIRCUITS ON CIRCUIT 2 ON

GP CIRCUIT 2 ON CIRCUIT 1 ON OFF

REVERSING DOUBLE POLE DOUBLE THROW

GO ON OFF ON

GX ON NONE ON

Actuator Styles/Dimensions: in. [mm]

.394[10.00]

.187[4.74]

.055[1.40] DIA

.125[3.18] DIA

.187[4.74]

.330[8.38]

.187[4.75]

PRINTED

CIRCUIT

#6-32NC-2

THREAD

.286[7.26]

SCREW

(ASSEMBLED)

1.892[48.05]

1.302[33.07]

1.436[36.47]

TIL,TIG,TIH,TII

1.024[26.00].957[24.30]

.630[16.00]

TIG

.430[10.90]

.880[22.4]

1.224[31.08]

TIL,TIG,TIH,TII

1.224[31.08]

.187 TAB (Q.C.)

TIG

TIG, TII

TERMINAL TYPE

.250 TAB (Q.C.)

.250[6.35]

.437[11.09]

.075[1.91] DIA

1.224[31.08]

1.035[26.28]

.312[7.92]

TII

SOLDER LUG

.650[16.51]

.650[16.51] .650[16.51]

WIRE LEAD

6.000[152.40]

1.134[28.80]

.500[12.70]

.141[3.58]

.187[4.75]

.350[8.89]

.370[9.39]

.250[6.35]

.650[16.51]

.300[7.62]

.957[24.30]

.996[25.30]

.880[22.40]

TIG

TIL,TIG,TIH,TII

.650[16.51]

1.224[31.08]

TIG

.422[10.72]

1.224[31.08] 1.224[31.08] .957[24.30].957[24.30] 1.224[31.08] .957[24.30]

NOTES:

Additional momentary circuits are available. Consult factory for details.

Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277

Rocker Switches

Bracket Dimensions: in. [mm]

NOTES

Double brackets supplied on TII-Series when B style bracket is specified. Consult factory for dimensional information.

*Available in both clearance and tapped hole options. Please specify when ordering.

55°

.680[17.27]

1.960[49.78]

.156[3.96] DIA.156[3.96] DIA

1.892[48.06]

4 plcs*

TIH

1.940[49.27]

TII

.158[4.01] DIA

1.940[49.27]

TIG

.156[3.96]

2.093[53.16]

1.625[41.27]

TIL

.426[10.82]

GCP GMP

GLOSS FINISH MATTE FINISH

1.700[43.18]

.430[10.92]

MBL, NBL, WBL

TIG

BLACK NYLON, SNAP-IN

1.625[41.27]

1.940[49.27]

.426[10.82]

1.875[47.62]

.520[13.21] 1.625[41.27]

TIG

TIL

1.625[41.27]

1.126[28.60]

TIG

TIL, TIG, TIH, TII

METAL, SNAP-IN

.900[22.86]

1.570[39.87]

.070[1.77]

* Angled corners are suggested for

optimum fit. Standard rectangular

cutout is acceptable.

MOUNTING HOLE

(Nylon Snap-in Brackets)

Panel Thickness:

.030 min. - .250 max.

1.450[36.83]

1.190[30.22]

.830[21.08]

NARROW

1.625[41.27]

MARINE / STD / WATERSHEDDING

1.570[39.88]

.960[24.38]

TIH, TII

2.062[52.37]

1.625[41.27]

1.700[43.18]

TAPPED HOLE

Standard with

A & B Brackets

6-32NC-2 TAP

1.625[41.27]

.078[1.98] .078[1.98] .078[1.98]

1.625[41.27]

.960[24.38]

.078[1.98]

CLEARANCE HOLE

Standard with

C Bracket

2.090[53.08]

1.625[41.27]

1.350[34.29]

1.950[49.53]

HOLE PLUG

FOR TIL, TIG, TIH & TII

TII, TIG

TIL

TIL, TIG, TIH, TII

METAL, SNAP-IN

WIDE

1.750[44.45]