: JEDEC DO-41, moulded plastic
with modified terminal diameter.
: Plated axial leads, solderable
per MIL-STD-202, Method 208.
: Colour band denotes cathode end.
: Any
: 0.3 grams (0.012 ounce)
1N4001S THRU 1N4007S
1 AMP SILICON RECTIFIERS
VOLTAGE
50 to 1000 Volts
CURRENT
1.0 Amp
0.6mm diameter leads
Low cost construction utilizing void - free
moulded plastic technique
Plastic package has Underwriters Laboratories Flammability
Classification 94V-0
Diffused junction
High surge current capability
Low leakage
High temperature soldering capability :
250°C/10 seconds/9.5mm (.375in.) lead length at 2.3kg
(5lb) tension
Easily cleaned with Freon, Alcohol, Chlorothene
and other similar solvents
FEATURES
MECHANICAL DATA
Case
Terminals
Polarity
Mounting Position
Weight
DIMENSIONS
- millimeters (inches)
25.4 (1.0)
min.
5.2 (.205)
4.1 (.160)
2.7 (.107)
2.0 (.080)
.64 (.025)
.53 (.021)
Cathode Band
25.4 (1.0)
min.
TECHNICAL SPECIFICATION
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
9.5mm (.375in.) Lead Length at TA = 75°C
V
V
A
A
Peak Forward Surge Current, 8.3 ms single half
sine - wave superimposed on rated load
µA
Storage Temperature Range
°C
°C
1N4001S 1N4002S 1N4003S 1N4004S 1N4005S 1N4006S 1N4007S
50
50
100
100
200
200
400
400
600
600
800
800
1000
1000
35 70 140 280 420 560 700
Maximum Instantaneous Forward Voltage at 1.0A
Operating Temperature Range
1.0
30
1.1
5.0
- 50 to + 175
- 50 to + 175
V
T = 100°C
Maximum Reverse Current at Rated
DC Blocking Voltage A
Typical Junction Capacitance (see Note 1)
T = 25°C
A
Typical Thermal Resistance (see Note 2)
50
°C/W
pF
V
Notes :
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
2. Thermal Resistance from Junction to Ambient
µA
50
VRMS
VDC
IF(AV)
IFSM
IR
TJ
TSTG
VRRM
RTHja
CJ
VF
Maximum Full load Reverse Current Full Cycle
Average, 9.5mm (.375in.) Lead Length at TL = 75°C
Symbols
30
30
IR(AV) µA
Units
DO-41 (mod.)
●
●
●
●
●
●
●
●
Reformatted by Anglia 9907
RATING AND CHARACTERISTIC CURVES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE
1N4001S THRU 1N4007S
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
10
25
30
110 100
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE
CURRENT, AMPERES
2 5 20 50
15
20
TA = 75°C
8.3ms single half sine-wave
(JEDEC) method
25 50 75 100 125 150 175 200
0
0.4
0.6
0.8
1.0
0.2
AMBIENT TEMPERATURE, °C
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
1.6
5mm x 5mm Cu Leafs
9.5mm Lead Length
L
0
.01
.03
0.1
10
0.4 0.6 0.8 1.0 1.2 1.4
INSTANTANEOUS FORWARD
VOLTAGE, VOLTS
0.3
1.0
3.0
30
100
TJ = 25°C
Pulse width = 300µs
2% duty cycle
5
FIG. 4 - TYPICAL JUNCTION CAPACITANCE
REVERSE VOLTAGE, VOLTS
1
10
100
1 10 100
CAPACITANCE, pF
2
5
20
50
2 5 20 50
.1 .2 .5
T = 25°C
f = 1MHz
VSIG = 50mVp-p
J
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE
CURRENT, MICROAMPERES
.01
0.1
10
0 20 40 60 80 100 120
1.0
TJ = 25°C
TJ = 100°C
.03
0.3
3.0
140
TAPING AND REELING SPECIFICATION
Dimensions - millimeters
NOTES : Each component lead sandwiched between tapes for 3.2mm
minimumCumulative pitch tolerance 2.0mm/10 pitch
5.0 ±0.5 1.2 max. 5°max.
L1
0.3
max. 6.0 ±0.4
330.0
79.0 ±1.0
16.5 ±0.4
35.7 ±0.3
0.3
max.
L2
52.4
±1.5
Reformatted by Anglia 9907
