Axial_E_200-299.QXP 21.09.2007 14:36 Uhr Seite 206 EC axial fans mains-powered S series, O 315 Max. current draw (1) Max. operative range Motor Hz rpm W A Pa *3G 315 M3G 074-CF A 1~ 100-130 50/60 1670 160 2.10 *3G 315 M3G 074-CF B 1~ 200-277 50/60 1660 170 1.30 subject to alterations Electr. connection Max. power input (1) Type Mass without attachments Speed/rpm Nominal data Perm. amb. temp. Frequency VAC Curve Nominal voltage range - Material: Guard grille: Steel, phosphated and coated in black plastic Wall ring: Sheet steel, pre-galvanised and coated in black Blades: Sheet steel, coated in black Rotor: Coated in black Electronics enclosure: Die-cast aluminium, coated in black - Number of blades: 5 - Direction of rotation: Dir. of air flow "V" counter-clockwise, "A" clockwise, seen on rotor - Type of protection: IP 44 - Insulation class: "B" - Mounting position: Shaft horizontal or rotor on bottom (rotor on top on request) - Condensate discharges: None - Mode of operation: Continuous operation (S1) - Bearings: Maintenance-free ball bearings C kg p. 423 110 -25 to +60 2.9 J1) 130 -25 to +60 2.9 J1) (1) Nominal data in operating point with maximum load and 115 or 230 VAC [Pa] [in H2O] Curves A 120 0,4 100 4 3 0,3 80 60 0,2 8 40 2 0,1 7 20 6 12 11 10 400 600 206 1 5 9 0 800 1200 1200 1800 [CFM] 2400 [m3/h] n [rpm] P1 [W] I [A] LpA [dB(A)] tL [%] A 1 1670 109 1.40 63 -- A 2 1660 118 1.50 62 53 A 3 1630 126 1.60 62 60 A 4 1610 138 1.80 60 55 A 5 1130 38 0.60 53 -- A 6 1120 42 0.60 52 48 A 7 1120 45 0.60 52 54 A 8 1110 49 0.70 50 50 A 9 560 8 0.10 32 -- A 10 560 9 0.20 31 25 A 11 560 9 0.20 31 33 A 12 560 10 0.20 29 30 21.09.2007 14:36 Uhr Seite 207 AC axial fans General information Axial_E_200-299.QXP AC axial S series AC axial K series AC axial A series Direction of air flow - Technical features: * Output 10 VDC max. 1.1 mA * PFC (passive) * Tach output * Control input 0-10 VDC / PWM * Over-temperature protected electronics / motor - EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to EN 61000-3-2/3 - Leakage current: < 3.5 mA acc. to EN 60950-1 - Cable exit: Variable - Protection class: I - Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE - Approvals: VDE, UL, CSA, CCC, GOST are applied for "V"/ "A" A3G A3G A3G A3G 315-AA76 315-AA76 315-AA58 315-AA58 -01 -02 -01 -02 W3G 315-CA76 W3G 315-CA76 W3G 315-CA58 W3G 315-CA58 "V"/ "A" With guard grille for full nozzle -01 -02 -01 -02 S3G S3G S3G S3G 315-BA76 315-BA76 315-BA58 315-BA58 With guard grille for short nozzle -01 -02 -01 -02 S3G S3G S3G S3G 315-AA76 315-AA76 315-AA58 315-AA58 -01 -02 -01 -02 120 100 0,4 4 0,3 60 40 LpA [dB(A)] tL [%] 1 1660 110 0.80 62 -- B 2 1640 119 0.90 61 43 B 3 1625 125 0.90 62 52 B 4 1610 135 1.00 60 50 B 5 1250 50 1.00 55 -- B 6 1250 55 1.00 54 24 B 7 1220 55 1.00 54 40 B 8 1170 57 1.00 52 43 B 9 640 11 0.40 35 -- B 10 630 12 0.40 34 17 B 11 630 12 0.50 34 31 B 12 620 13 0.50 33 37 0,2 8 I [A] B 80 3 P1 [W] 7 0,1 2 EC-SYSTEMS B n [rpm] Accessories [in H2O] [Pa] Curves ESM Q-motor EC axial S series "V" "A" "V" "A" "V"/ "A" With full round nozzle EC axial fans "V"/ "A" Without attachments 20 6 Technology 12 11 10 600 800 1200 1800 [CFM] 2400 [m3/h] 207 Drawings p. 208 f. Guard grille p. 362 f. Wall ring p. 372 f. Electr. connection p. 423 Contacts 400 1 5 1200 9 0 Axial_E_200-299.QXP 21.09.2007 14:36 Uhr Seite 208 EC axial fans mains-powered S series, O 315, drawings of directions of air flow "V" and "A" Type Without attachments c A3G A3G A3G A3G (1) 105,21 M4 M4 (3) M4 (2) c3 32,50,5 315-AA76 315-AA76 315-AA58 315-AA58 -01 -02 -01 -02 W3G 315-CA76 W3G 315-CA76 W3G 315-CA58 W3G 315-CA58 -01 -02 -01 -02 "V" 6.0 "A" -6.0 "V" 6.0 "A" -6.0 4x90 20 0+ 85 45 Core-end sleeve 45 853 "V" "A" O O9 58 0 O1 25 8 O92,1 O3122 O1330,3 O115,3 30,2 (1) Depth of screw max. 8 mm (pilot hole for self-tapping thread) (2) Depth of screw max. 6 mm (pilot hole for self-tapping thread) (3) Depth of screw 8-10 mm Type With full round nozzle 1143 742 "V" "A" 15 O3472 O3971 O3601 6x 60 9 "V" "A" 0 38 11 "V" "A" Type With guard grille for full nozzle s3 5 "V" "A" 208 6,4 O3752,5 O3601 401 s S3G S3G S3G S3G 315-BA76 315-BA76 315-BA58 315-BA58 -01 -02 -01 -02 "V" 91.0 "A" 79.0 "V" 91.0 "A" 79.0 21.09.2007 14:36 Uhr Seite 209 Type With guard grille for short nozzle 6,4 315-AA76 315-AA76 315-AA58 315-AA58 -01 -02 -01 -02 "V" 41.0 "A" 29.0 "V" 41.0 "A" 29.0 AC axial S series u3 u S3G S3G S3G S3G AC axial K series O3601 O3752,5 902 AC axial fans General information Axial_E_200-299.QXP AC axial A series 5 209 Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial S series EC axial fans "V" "A" Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ebm-papst: A3G330-AA58-02