Freescale Semiconductor Product Brief Document Number: K60PB Rev. 8, 5/2011 K60 Family Product Brief Supports all K60 devices Contents 1 Kinetis Portfolio Kinetis is the most scalable portfolio of low power, mixedsignal ARM(R)CortexTM-M4 MCUs in the industry. Phase 1 of the portfolio consists of five MCU families with over 200 pin-, peripheral- and software-compatible devices. Each family offers excellent performance, memory and feature scalability with common peripherals, memory maps, and packages providing easy migration both within and between families. Kinetis MCUs are built from Freescale's innovative 90nm Thin Film Storage (TFS) flash technology with unique FlexMemory. Kinetis MCU families combine the latest lowpower innovations and high performance, high precision mixed-signal capability with a broad range of connectivity, human-machine interface, and safety & security peripherals. Kinetis MCUs are supported by a market-leading enablement bundle from Freescale and numerous ARM 3rd party ecosystem partners. (c) 2010-2011 Freescale Semiconductor, Inc. 1 Kinetis Portfolio................................................................1 2 K60 Family Introduction...................................................3 3 K60 Block Diagram..........................................................3 4 Features.............................................................................5 5 Power modes...................................................................33 6 Developer Environment..................................................34 7 Revision History.............................................................40 K70 Family 512KB-1MB 196-256pin Kinetis Portfolio Family Program Flash Packages K60 Family 256KB-1MB 100-256pin K50 Family 128-512KB 64-144pin K40 Family 64-512KB 64-144pin K30 Family 64-512KB 64-144pin K20 Family 32KB-1MB 32-144pin K10 Family 32KB-1MB 32-144pin Low power Mixed signal Encryption and Tamper Detect Key Features USB Segment LCD Operational & transimpedance amplifiers Figure 1. Kinetis MCU portfolio Ethernet DDR Graphic LCD All Kinetis families include a powerful array of analog, communication and timing and control peripherals with the level of feature integration increasing with flash memory size and the number of inputs/outputs. Features common to all Kinetis families include: * Core: * ARM Cortex-M4 Core delivering 1.25 DMIPS/MHz with DSP instructions (floating-point unit available on certain Kinetis families) * Up to 32-channel DMA for peripheral and memory servicing with minimal CPU intervention * Broad range of performance levels rated at maximum CPU frequencies of 50 MHz, 72 MHz, 100 MHz, 120 MHz, and 150 MHz * Ultra-low power: * 10 low power operating modes for optimizing peripheral activity and wake-up times for extended battery life. * Low-leakage wake-up unit, low power timer, and low power RTC for additional low power flexibility * Industry-leading fast wake-up times * Memory: * Scalable memory footprints from 32 KB flash / 8 KB RAM to 1 MB flash / 128 KB RAM. Independent flash banks enable concurrent code execution and firmware updates * Optional 16 KB cache memory for optimizing bus bandwidth and flash execution performance. Offered on K10, K20, and K60 family devices with CPU performance of up to 150 MHz. * FlexMemory with up to 512 KB FlexNVM and up to 16 KB FlexRAM. FlexNVM can be partitioned to support additional program flash memory (ex. bootloader), data flash (ex. storage for large tables), or EEPROM backup. FlexRAM supports EEPROM byte-write/byte-erase operations and dictates the maximum EEPROM size. * EEPROM endurance capable of exceeding 10 million cycles * EEPROM erase/write times an order of magnitude faster than traditional EEPROM K60 Family Product Brief, Rev. 8, 5/2011 2 Freescale Semiconductor, Inc. K60 Family Introduction * Multi-function external bus interface capable of interfacing to external memories, gate-array logic * DDR memory controller * NAND flash controller * Mixed-signal analog: * Fast, high precision 16-bit ADCs, 12-bit DACs, programmable gain amplifiers, high speed comparators and an internal voltage reference. Powerful signal conditioning, conversion and analysis capability with reduced system cost * Human Machine Interface (HMI): * Capacitive Touch Sensing Interface with full low-power support and minimal current adder when enabled * Connectivity and Communications: * UARTs with ISO7816 and IrDA support, I2S, CAN, I2C and DSPI * USB OTG controller * Reliability, Safety and Security: * Hardware cyclic redundancy check engine for validating memory contents/communication data and increased system reliability * Independent-clocked COP for protection against code runaway in fail-safe applications * External watchdog monitor * Secure storage and tamper detect * Timing and Control: * Powerful FlexTimers which support general purpose, PWM, and motor control functions * Carrier Modulator Transmitter for IR waveform generation * Programmable Interrupt Timer for RTOS task scheduler time base or trigger source for ADC conversion and programmable delay block * System: * 5 V tolerant GPIO with pin interrupt functionality * Wide operating voltage range from 1.71 V to 3.6 V with flash programmable down to 1.71 V with fully functional flash and analog peripherals * Ambient operating temperature ranges from -40 C to 105 C 2 K60 Family Introduction The K60 MCU family includes IEEE 1588 Ethernet, full- and high-speed USB 2.0 On-The-Go with device charger detect capability, hardware encryption and tamper detection capabilities. Devices start from 256 KB of flash in 100LQFP packages extending up to 1 MB in a 256MAPBGA package with a rich suite of analog, communication, timing and control peripherals. High memory density K60 family devices include an optional single precision floating point unit, NAND flash controller and DRAM controller. 3 K60 Block Diagram The below figure shows a superset block diagram of the K60 device. Other devices within the family have a subset of the features. K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 3 K60 Block Diagram Kinetis K60 Family ARM (R) CortexTM-M4 Core System Memories and Memory Interfaces Clocks Internal and external watchdogs Program flash RAM Phaselocked loop Debug interfaces DSP Memory protection FlexMemory Cache Frequencylocked loop Interrupt controller Floatingpoint unit DMA Serial programming interface External bus Low/high frequency oscillators Low-leakage wakeup NAND flash controller DDR controller Internal reference clocks Communication Interfaces Human-Machine Interface (HMI) Security Analog Timers CRC 16-bit ADC x4 Timers x4 (20ch) I C x3 I S x2 GPIO Random number generator PGA x4 Carrier modulator transmitter UART x6 Secure Digital Xtrinsic touch-sensing interface Hardware encryption Analog comparator x3 delay block SPI x3 USB OTG LS/FS/HS Tamper detect 6-bit DAC x3 Periodic interrupt timers CAN x2 USB LS/FS transceiver 12-bit DAC x2 Low power timer IEEE 1588 Ethernet USB charger detect Voltage reference Independent real-time clock and Integrity Programmable 2 2 USB voltage regulator IEEE 1588 Timers LEGEND Migration difference from K40 family Figure 2. K60 Block Diagram K60 Family Product Brief, Rev. 8, 5/2011 4 Freescale Semiconductor, Inc. Features 4 Features 4.1 Common features among the K60 family All devices within the K60 family features the following at a minimum: Table 1. Common features among all K60 devices Operating characteristics * * * * Voltage range 1.71V - 3.6V Flash memory programming down to 1.71V Temperature range (TA) -40 to 105C Flexible modes of operation Core features * * * * * Next generation 32-bit ARM Cortex-M4 core Supports DSP instructions Nested vectored interrupt controller (NVIC) Asynchronous wake-up interrupt controller (AWIC) Debug & trace capability * 2-pin serial wire debug (SWD) * IEEE 1149.1 Joint Test Action Group (JTAG) * IEEE 1149.7 compact JTAG (cJTAG) * Trace port interface unit (TPIU) * Flash patch and breakpoint (FPB) * Data watchpoint and trace (DWT) * Instrumentation trace macrocell (ITM) System and power management * Software and hardware watchdog with external monitor pin * DMA controller * Low-leakage wake-up unit (LLWU) * Power management controller with 10 different power modes * Non-maskable interrupt (NMI) * 128-bit unique identification (ID) number per chip Clocks * Multi-purpose clock generator * PLL and FLL operation * Internal reference clocks * * * * 3MHz to 32MHz crystal oscillator 32kHz to 40kHz crystal oscillator Internal 1kHz low power oscillator DC to 50MHz external square wave input clock Memories and Memory Interfaces * FlexMemory consisting of FlexNVM (non-volatile flash memory that can execute program code, store data, or backup EEPROM data) or FlexRAM (RAM memory that can be used as traditional RAM or as highendurance EEPROM storage, and also accelerates flash programming) * Flash security and protection features * Serial flash programming interface (EzPort) Security and integrity * Cyclic redundancy check (CRC) Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 5 Features Table 1. Common features among all K60 devices (continued) Analog * * * * 16-bit SAR ADC Programmable voltage reference (VREF) 12-bit DAC High-speed Analog comparator (CMP) with 6-bit DAC Timers * 1x8ch motor control/general purpose/PWM flexible timer (FTM) * 2x2ch quadrature decoder/general purpose/PWM flexible timer (FTM) * Carrier modulator timer (CMT) * Programmable delay block (PDB) * 1x4ch programmable interrupt timer (PIT) * Low-power timer (LPT) Communications * * * * * * Human-machine interface * GPIO with pin interrupt support, DMA request capability, digital glitch filter, and other pin control options * 5V tolerant inputs * Capacitive touch sensing inputs Ethernet with IEEE 1588 support USB Full Speed/Low Speed OTG/Host/Device CAN SPI I2C with SMBUS support UART (w/ ISO7816, IrDA and hardware flow control) 4.1.1 Memory and package options The following table summarizes the memory and package options for the K60 family. All devices which share a common package are pin-for-pin compatible. Table 2. K60 family summary SRAM (KB) EEPROM/ FlexRAM (KB) 100 LQFP (14x14) 104BGA (8x8) 121BGA (8x8) 144LQFP (20x20) 144BGA (13x13) 196BGA (15x15) 2566BGA (17x17) 100 256 -- 64 -- + -- + + + -- -- 100 512 -- 128 -- + -- + + + -- -- 120 1024 -- 128 -- -- -- -- + + -- -- 150 1024 -- 128 -- -- -- -- + + -- -- FlexNVM (KB) K60N Flash (KB) Performance (MHz) Package Sub-Family Memory Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 6 Freescale Semiconductor, Inc. Features Table 2. K60 family summary (continued) SRAM (KB) EEPROM/ FlexRAM (KB) 100 LQFP (14x14) 104BGA (8x8) 121BGA (8x8) 144LQFP (20x20) 144BGA (13x13) 196BGA (15x15) 2566BGA (17x17) K60X 100 256 256 64 4 + -- + + + -- -- 120 512 512 128 16 -- -- -- + + -- -- 150 512 512 128 16 -- -- -- + + -- -- 120 1024 -- 128 -- -- -- -- -- + + + 150 1024 -- 128 -- -- -- -- -- + + + 120 512 512 128 16 -- -- -- -- + + + 150 512 512 128 16 -- -- -- -- + + + K61N K61X Flash (KB) FlexNVM (KB) Performance (MHz) Package Sub-Family Memory 4.2 FlexMemory Freescale's new FlexMemory technology provides an extremely versatile and powerful solution for designers seeking onchip EEPROM and/or additional program or data flash memory. As easy and as fast as SRAM, it requires no user or system intervention to complete programming and erase functions when used as high endurance byte-write/byte-erase EEPROM. EEPROM array size can also be configured for improved endurance to suit application requirements. FlexMemory can also provide additional flash memory (FlexNVM) for data or program storage in parallel with the main program flash. The key features of FlexMemory include: * Configurability for designer: * EEPROM array size and number of write/erase cycles * Program or data flash size * * * * EEPROM endurance of 10M write/erase cycles possible over full voltage and temperature range Seamless EEPROM read/write operations: simply write or read a memory address High-speed byte, 16-bit, and 32-bit write/erase operations to EEPROM Eliminates the costs associated with external EEPROM ICs, and the software headaches and resource (CPU/flash/ RAM) impact of EEPROM emulation schemes * Storage for large data tables or bootloader * Read-while-write operation with main program flash memory * Minimum write voltage 1.71V 4.2.1 Programmable Trade-Off FlexMemory lets you fully configure the way FlexNVM and FlexRAM blocks are used to provide the best balance of memory resources for their application. K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 7 Features The user can configure several parameters, including EEPROM size, endurance, write size, and the size of additional program/data flash. In addition to this flexibility, FlexMemory provides superior EEPROM performance, endurance, and low-voltage operation when compared to traditional EEPROM solutions. * Enhanced EEPROM -- Combines FlexRAM and FlexNVM to create byte-write/erase, high-speed, and high-endurance EEPROM * FlexNVM -- Can be used as: * part of the EEPROM configuration, * additional program or data flash, or * a combination of the above. For example, a portion can be used as flash while the rest is used for enhanced EEPROM backup. * FlexRAM -- Can be used as part of the EEPROM configuration or as additional system RAM 4.2.2 Use Case Example The MCU has 128 KB program flash, 32 KB SRAM, and FlexMemory has 128 KB FlexNVM and 4 KB FlexRAM (maximum EEPROM size). The application requires 8 KB additional program flash for a bootloader and 256 bytes of highendurance EEPROM. The user allocates 8 KB of FlexNVM for the additional program flash and the remaining 120 KB for EEPROM backup. The user defines 256 bytes of EEPROM size from the FlexRAM. In this example, the EEPROM endurance results in a minimum of 2.32M write/erase cycles. 4.3 Part Numbers and Packaging Q K## A M FFF T PP CC (N) Tape and Reel (T&R) Qualification status Family Speed (MHz) Key attribute Package identifier Memory Temperature range (C) Flash size Figure 3. Part numbers diagrams Field Description Values Q Qualification status * M = Fully qualified, general market flow * P = Prequalification K## Kinetis family * K60 A Key attribute * D = Cortex-M4 w/ DSP * F = Cortex-M4 w/ FPU Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 8 Freescale Semiconductor, Inc. Features Field Description Values M Flash memory type * N = Program flash only * X = Program flash and FlexMemory FFF Program flash memory size * * * * * * T Temperature range (C) * V = -40 to 105 * C = -40 to 85 PP Package identifier * * * * * * * * * * * * * FM = 32 QFN (5 mm x 5 mm) FT = 48 QFN (7 mm x 7 mm) LF = 48 LQFP (7 mm x 7 mm) EX = 64 QFN (9 mm x 9 mm) LH = 64 LQFP (10 mm x 10 mm) LK = 80 LQFP (12 mm x 12 mm) MB = 81 MAPBGA (8 mm x 8 mm) LL = 100 LQFP (14 mm x 14 mm) MC = 121 MAPBGA (8 mm x 8 mm) LQ = 144 LQFP (20 mm x 20 mm) MD = 144 MAPBGA (13 mm x 13 mm) MF = 196 MAPBGA (15 mm x 15 mm) MJ = 256 MAPBGA (17 mm x 17 mm) CC Maximum CPU frequency (MHz) * * * * * 5 = 50 MHz 7 = 72 MHz 10 = 100 MHz 12 = 120 MHz 15 = 150 MHz N Packaging type * R = Tape and reel * (Blank) = Trays 32 = 32 KB 64 = 64 KB 128 = 128 KB 256 = 256 KB 512 = 512 KB 1M0 = 1 MB 4.4 K60 family features The following sections list the differences among the various devices available within the K60 family. The sections are split by levels of performance. The features listed below each part number specify the maximum configuration available on that device. The signal multiplexing configuration determines which modules can be used simultaneously. K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 9 Features 4.4.1 K60 family features (100MHz Performance) MK60DN256ZVLQ10(R) MK60DX256ZVLQ10(R) MK60DN512ZVLQ10(R) MK60DN256ZVMD10(R) MK60DX256ZVMD10(R) MK60DN512ZVMD10(R) 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz Pin Count 100 100 100 121 121 121 144 144 144 144 144 144 Package LQFP LQFP MK60DN256ZVMC10(R) MK60DX256ZVMC10(R) 100 MHz MK60DN512ZVLL10(R) 100 MHz MK60DX256ZVLL10(R) CPU Frequency MC Partnumber MK60DN256ZVLL10(R) MK60DN512ZVMC10(R) Table 3. K60 100MHz Performance Table General LQFP MAPB MAPB MAPB LQFP GA GA GA LQFP LQFP MAPB MAPB MAPB GA GA GA Memories and Memory Interfaces Total Flash Memory 256K B 512K B 512K B 256K B 512K B 512K B 256K B 512K B 512K B 256K B 512K B 512K B Flash 256K B 256K B 512K B 256K B 256K B 512K B 256K B 256K B 512K B 256K B 256K B 512K B FlexNVM - 256K B - - 256K B - - 256K B - - 256K B - EEPROM/FlexRAM - 4KB - - 4KB - - 4KB - - 4KB - SRAM 64KB 64KB 128K B 64KB 64KB 128K B 64KB 64KB 128K B 64KB 64KB 128K B Serial Programming Interface YES YES YES YES YES YES YES YES YES YES YES YES External Bus Interface (FlexBus), Addr/Data/CS 21/16/ 21/16/ 21/16/ 32/32/ 32/32/ 32/32/ 32/32/ 32/32/ 32/32/ 32/32/ 32/32/ 32/32/ 5 5 5 6 6 6 6 6 6 6 6 6 Non-Muxed External Bus 21/8/5 21/8/5 21/8/5 30/16/ 30/16/ 30/16/ 30/16/ 30/16/ 30/16/ 30/16/ 30/16/ 30/16/ Interface (Flexbus), Addr/ 6, 6, 6, 6, 6, 6, 6, 6, 6, Data/CS 30/8/6 30/8/6 30/8/6 30/8/6 30/8/6 30/8/6 30/8/6 30/8/6 30/8/6 DDR Controller - - - - - - - - - - - - NAND Flash Controller - - - - - - - - - - - - Cache - - - - - - - - - - - - Core Modules DSP YES YES YES YES YES YES YES YES YES YES YES YES SPFPU - - - - - - - - - - - - Debug JTAG, JTAG, JTAG, JTAG, JTAG, JTAG, JTAG, JTAG, JTAG, JTAG, JTAG, JTAG, cJTA cJTA cJTA cJTA cJTA cJTA cJTA cJTA cJTA cJTA cJTA cJTA G, G, G, G, G, G, G, G, G, G, G, G, SWD SWD SWD SWD SWD SWD SWD SWD SWD SWD SWD SWD Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 10 Freescale Semiconductor, Inc. Features MK60DN256ZVLL10(R) MK60DX256ZVLL10(R) MK60DN512ZVLL10(R) MK60DN256ZVMC10(R) MK60DX256ZVMC10(R) MK60DN512ZVMC10(R) MK60DN256ZVLQ10(R) MK60DX256ZVLQ10(R) MK60DN512ZVLQ10(R) MK60DN256ZVMD10(R) MK60DX256ZVMD10(R) MK60DN512ZVMD10(R) Table 3. K60 100MHz Performance Table (continued) Trace TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB NMI YES YES YES YES YES YES YES YES YES YES YES YES MC Partnumber System Modules Software Watchdog YES YES YES YES YES YES YES YES YES YES YES YES Hardware Watchdog YES YES YES YES YES YES YES YES YES YES YES YES PMC YES YES YES YES YES YES YES YES YES YES YES YES MPU YES YES YES YES YES YES YES YES YES YES YES YES DMA 16ch 16ch 16ch 16ch 16ch 16ch 16ch 16ch 16ch 16ch 16ch 16ch Clock Modules MCG YES YES YES YES YES YES YES YES YES YES YES YES OSC (32-40kHz/ 3-32MHz) YES YES YES YES YES YES YES YES YES YES YES YES RTC (32KHz Osc, Vbat) YES YES YES YES YES YES YES YES YES YES YES YES Security and Integrity Hardware Encryption YES YES YES YES YES YES YES YES YES YES YES YES Tamper Detect - - - - - - - - - - - - CRC YES YES YES YES YES YES YES YES YES YES YES YES Analog ADC0 (SE:single-ended, DP:differential pair) 19ch SE + 3ch DP 19ch SE + 3ch DP 19ch SE + 3ch DP 19ch SE + 3ch DP 19ch SE + 3ch DP 19ch SE + 3ch DP 23ch SE + 3ch DP 23ch SE + 3ch DP 23ch SE + 3ch DP 23ch SE + 3ch DP 23ch SE + 3ch DP 23ch SE + 3ch DP ADC1 16ch SE + 3ch DP 16ch SE + 3ch DP 16ch SE + 3ch DP 19ch SE + 3ch DP 19ch SE + 3ch DP 19ch SE + 3ch DP 21ch SE + 3ch DP 21ch SE + 3ch DP 21ch SE + 3ch DP 21ch SE + 3ch DP 21ch SE + 3ch DP 21ch SE + 3ch DP ADC2 - - - - - - - - - - - - ADC3 - - - - - - - - - - - - Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 11 Features MC Partnumber MK60DN256ZVLL10(R) MK60DX256ZVLL10(R) MK60DN512ZVLL10(R) MK60DN256ZVMC10(R) MK60DX256ZVMC10(R) MK60DN512ZVMC10(R) MK60DN256ZVLQ10(R) MK60DX256ZVLQ10(R) MK60DN512ZVLQ10(R) MK60DN256ZVMD10(R) MK60DX256ZVMD10(R) MK60DN512ZVMD10(R) Table 3. K60 100MHz Performance Table (continued) ADC DP 4ch 4ch 4ch 4ch 4ch 4ch 4ch 4ch 4ch 4ch 4ch 4ch ADC SE 19ch 19ch 19ch 21ch 21ch 21ch 27ch 27ch 27ch 27ch 27ch 27ch PGA 2 2 2 2 2 2 2 2 2 2 2 2 12-bit DAC 1 1 1 2 2 2 2 2 2 2 2 2 Analog Comparator 3 3 3 3 3 3 3 3 3 3 3 3 Analog Comparator Inputs 6/5/ 5/0 6/5/ 5/0 6/5/ 5/0 6/4/ 3/0 6/4/ 3/0 6/4/ 3/0 6/5/ 4/0 6/5/ 4/0 6/5/ 4/0 6/5/ 4/0 6/5/ 4/0 6/5/ 4/0 OPAMP - - - - - - - - - - - - TRIAMP - - - - - - - - - - - - Vref YES YES YES YES YES YES YES YES YES YES YES YES Timers Motor Control/General purpose/PWM 1x8ch 1x8ch 1x8ch 1x8ch 1x8ch 1x8ch 1x8ch 1x8ch 1x8ch 1x8ch 1x8ch 1x8ch Quad decoder/General purpose/PWM 2x2ch 2x2ch 2x2ch 2x2ch 2x2ch 2x2ch 2x2ch 2x2ch 2x2ch 2x2ch 2x2ch 2x2ch FTM External CLK 2 2 2 2 2 2 2 2 2 2 2 2 Low Power Timer 1 1 1 1 1 1 1 1 1 1 1 1 PIT 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch PDB 1 1 1 1 1 1 1 1 1 1 1 1 CMT(Carrier Module Transmitter) YES YES YES YES YES YES YES YES YES YES YES YES Communication Interfaces SDHC 4-bit 4-bit 4-bit 8-bit, CLKI N 8-bit, CLKI N 8-bit, CLKI N 8-bit, CLKI N 8-bit, CLKI N 8-bit, CLKI N 8-bit, CLKI N 8-bit, CLKI N 8-bit, CLKI N High Baudrate UART w/ ISO7816 1 1 1 1 1 1 1 1 1 1 1 1 High Baudrate UART 1 1 1 1 1 1 1 1 1 1 1 1 UART 3 3 3 4 4 4 4 4 4 4 4 4 SPI chip selects per module 6/4/ 1 6/4/ 1 6/4/ 1 6/4/ 2 6/4/ 2 6/4/ 2 6/4/ 2 6/4/ 2 6/4/ 2 6/4/ 2 6/4/ 2 6/4/ 2 I2C 2 2 2 2 2 2 2 2 2 2 2 2 Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 12 Freescale Semiconductor, Inc. Features MC Partnumber MK60DN256ZVLL10(R) MK60DX256ZVLL10(R) MK60DN512ZVLL10(R) MK60DN256ZVMC10(R) MK60DX256ZVMC10(R) MK60DN512ZVMC10(R) MK60DN256ZVLQ10(R) MK60DX256ZVLQ10(R) MK60DN512ZVLQ10(R) MK60DN256ZVMD10(R) MK60DX256ZVMD10(R) MK60DN512ZVMD10(R) Table 3. K60 100MHz Performance Table (continued) I2S 1 1 1 1 1 1 1 1 1 1 1 1 CAN 2 2 2 2 2 2 2 2 2 2 2 2 USB OTG LS/FS w/ onchip xcvr 1 1 1 1 1 1 1 1 1 1 1 1 USB OTG HS - - - - - - - - - - - - USB DCD YES YES YES YES YES YES YES YES YES YES YES YES USB 120mAReg YES YES YES YES YES YES YES YES YES YES YES YES Ethernet w /1588 RMII RMII RMII RMII RMII RMII MII / RMII MII / RMII MII / RMII MII / RMII MII / RMII MII / RMII IEEE1588 Timer 1x3ch 1x3ch 1x3ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch 1x4ch , , , , , , , , , , , , CLKI CLKI CLKI CLKI CLKI CLKI CLKI CLKI CLKI CLKI CLKI CLKI N N N N N N N N N N N N Human-Machine Interface Segment LCD - - - - - - - - - - - - Graphic LCD - - - - - - - - - - - - TSI(Capacitive Touch) 16 input 16 input 16 input 16 input 16 input 16 input 16 input 16 input 16 input 16 input 16 input 16 input GPIO (w interrupt) 66 66 66 86 86 86 100 100 100 100 100 100 YES YES YES YES YES YES Operating Characteristics 5V Tolerant Voltage Range YES YES YES YES YES YES 1.71-3 1.71-3 1.71-3 1.71-3 1.71-3 1.71-3 1.71-3 1.71-3 1.71-3 1.71-3 1.71-3 1.71-3 .6V .6V .6V .6V .6V .6V .6V .6V .6V .6V .6V .6V Flash Write V 1.71V 1.71V 1.71V 1.71V 1.71V 1.71V 1.71V 1.71V 1.71V 1.71V 1.71V 1.71V Temp Range -40 to 105C -40 to 105C -40 to 105C -40 to 105C -40 to 105C -40 to 105C -40 to 105C -40 to 105C -40 to 105C -40 to 105C -40 to 105C -40 to 105C K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 13 Features 4.4.2 K60 family features (120MHz Performance) MK60FX512VMD12(R) MK60FN1M0VMD12(R) CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz Pin Count 144 144 144 144 Package LQFP LQFP MAPBGA MAPBGA MK60FX512VLQ12(R) MK60FN1M0VLQ12(R) Table 4. K60 120MHz Performance Table MC Partnumber General Memories and Memory Interfaces Total Flash Memory 1MB 1MB 1MB 1MB Flash 512KB 1MB 512KB 1MB FlexNVM 512KB - 512KB - EEPROM/FlexRAM 16KB - 16KB - SRAM 128KB 128KB 128KB 128KB Serial Programming Interface YES YES YES YES External Bus Interface (FlexBus), Addr/Data/CS 32/32/6 32/32/6 32/32/6 32/32/6 Non-Muxed External Bus Interface (Flexbus), Addr/ Data/CS 30/16/6, 30/8/6 30/16/6, 30/8/6 30/16/6, 30/8/6 30/16/6, 30/8/6 DDR Controller - - - - NAND Flash Controller YES YES YES YES Cache 16KB 16KB 16KB 16KB Core Modules DSP YES YES YES YES SPFPU YES YES YES YES Debug JTAG, cJTAG, SWD JTAG, cJTAG, SWD JTAG, cJTAG, SWD JTAG, cJTAG, SWD Trace TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB NMI YES YES YES YES System Modules Software Watchdog YES YES YES YES Hardware Watchdog YES YES YES YES PMC YES YES YES YES Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 14 Freescale Semiconductor, Inc. Features MC Partnumber MK60FX512VLQ12(R) MK60FN1M0VLQ12(R) MK60FX512VMD12(R) MK60FN1M0VMD12(R) Table 4. K60 120MHz Performance Table (continued) MPU YES YES YES YES DMA 32ch 32ch 32ch 32ch Clock Modules MCG YES YES YES YES OSC (32-40kHz/3-32MHz) 32-40kHz/ 8-32MHz 32-40kHz/ 8-32MHz 32-40kHz/ 8-32MHz 32-40kHz/ 8-32MHz RTC (32KHz Osc, Vbat) YES YES YES YES Security and Integrity Hardware Encryption YES YES YES YES Tamper Detect - - - - CRC YES YES YES YES Analog ADC0 (SE:single-ended, DP:differential pair) 12ch SE + 3ch DP 12ch SE + 3ch DP 12ch SE + 3ch DP 12ch SE + 3ch DP ADC1 18ch SE + 3ch DP 18ch SE + 3ch DP 18ch SE + 3ch DP 18ch SE + 3ch DP ADC2 7ch SE + 2ch DP 7ch SE + 2ch DP 7ch SE + 2ch DP 7ch SE + 2ch DP ADC3 8ch SE + 2ch DP 8ch SE + 2ch DP 8ch SE + 2ch DP 8ch SE + 2ch DP ADC DP 4ch 4ch 4ch 4ch ADC SE 48ch 48ch 48ch 48ch PGA 4 4 4 4 12-bit DAC 2 2 2 2 Analog Comparator 4 4 4 4 Analog Comparator Inputs 5/2/2/5 5/2/2/5 5/2/2/5 5/2/2/5 OPAMP - - - - TRIAMP - - - - Vref YES YES YES YES 2x8ch 2x8ch 2x8ch Timers Motor Control/General purpose/PWM 2x8ch Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 15 Features MC Partnumber MK60FX512VLQ12(R) MK60FN1M0VLQ12(R) MK60FX512VMD12(R) MK60FN1M0VMD12(R) Table 4. K60 120MHz Performance Table (continued) Quad decoder/General purpose/PWM 2x2ch 2x2ch 2x2ch 2x2ch FTM External CLK 2 2 2 2 Low Power Timer 1 1 1 1 PIT 1x4ch 1x4ch 1x4ch 1x4ch PDB 1 1 1 1 CMT(Carrier Module Transmitter) YES YES YES YES Communication Interfaces SDHC 8-bit, CLKIN 8-bit, CLKIN 8-bit, CLKIN 8-bit, CLKIN High Baudrate UART w/ ISO7816 2 2 2 2 High Baudrate UART 0 0 0 0 UART 4 4 4 4 SPI chip selects per module 6/4/2 6/4/2 6/4/2 6/4/2 I2C 2 2 2 2 I2S 2 2 2 2 CAN 2 2 2 2 USB OTG LS/FS w/ on-chip xcvr 1 1 1 1 USB OTG HS 1 1 1 1 USB DCD YES YES YES YES USB 120mAReg YES YES YES YES Ethernet w /1588 MII / RMII MII / RMII MII / RMII MII / RMII IEEE1588 Timer 1x4ch, CLKIN 1x4ch, CLKIN 1x4ch, CLKIN 1x4ch, CLKIN Human-Machine Interface Segment LCD - - - - Graphic LCD - - - - TSI(Capacitive Touch) 16 input 16 input 16 input 16 input GPIO (w interrupt) 100 100 100 100 Operating Characteristics 5V Tolerant YES YES YES YES Voltage Range 1.71-3.6V 1.71-3.6V 1.71-3.6V 1.71-3.6V Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 16 Freescale Semiconductor, Inc. Features MC Partnumber MK60FX512VLQ12(R) MK60FN1M0VLQ12(R) MK60FX512VMD12(R) MK60FN1M0VMD12(R) Table 4. K60 120MHz Performance Table (continued) Flash Write V 1.71V 1.71V 1.71V 1.71V Temp Range -40 to 105C -40 to 105C -40 to 105C -40 to 105C 4.4.3 K60 family features (150MHz Performance) MK60FX512VMD15(R) MK60FN1M0VMD15(R) CPU Frequency 150 MHz 150 MHz 150 MHz 150 MHz Pin Count 144 144 144 144 Package LQFP LQFP MAPBGA MAPBGA MK60FX512VLQ15(R) MK60FN1M0VLQ15(R) Table 5. K60 150MHz Performance Table MC Partnumber General Memories and Memory Interfaces Total Flash Memory 1MB 1MB 1MB 1MB Flash 512KB 1MB 512KB 1MB FlexNVM 512KB - 512KB - EEPROM/FlexRAM 16KB - 16KB - SRAM 128KB 128KB 128KB 128KB Serial Programming Interface YES YES YES YES External Bus Interface (FlexBus), Addr/Data/CS 32/32/6 32/32/6 32/32/6 32/32/6 Non-Muxed External Bus Interface (Flexbus), Addr/ Data/CS 30/16/6, 30/8/6 30/16/6, 30/8/6 30/16/6, 30/8/6 30/16/6, 30/8/6 DDR Controller - - - - NAND Flash Controller YES YES YES YES Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 17 Features MK60FX512VMD15(R) MK60FN1M0VMD15(R) Cache MK60FN1M0VLQ15(R) MC Partnumber MK60FX512VLQ15(R) Table 5. K60 150MHz Performance Table (continued) 16KB 16KB 16KB 16KB Core Modules DSP YES YES YES YES SPFPU YES YES YES YES Debug JTAG, cJTAG, SWD JTAG, cJTAG, SWD JTAG, cJTAG, SWD JTAG, cJTAG, SWD Trace TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB TPIU, FPB, DWT, ITM, ETM, ETB NMI YES YES YES YES System Modules Software Watchdog YES YES YES YES Hardware Watchdog YES YES YES YES PMC YES YES YES YES MPU YES YES YES YES DMA 32ch 32ch 32ch 32ch Clock Modules MCG YES YES YES YES OSC (32-40kHz/3-32MHz) 32-40kHz/ 8-32MHz 32-40kHz/ 8-32MHz 32-40kHz/ 8-32MHz 32-40kHz/ 8-32MHz RTC (32KHz Osc, Vbat) YES YES YES YES Security and Integrity Hardware Encryption YES YES YES YES Tamper Detect - - - - CRC YES YES YES YES Analog ADC0 (SE:single-ended, DP:differential pair) 12ch SE + 3ch DP 12ch SE + 3ch DP 12ch SE + 3ch DP 12ch SE + 3ch DP ADC1 18ch SE + 3ch DP 18ch SE + 3ch DP 18ch SE + 3ch DP 18ch SE + 3ch DP ADC2 7ch SE + 2ch DP 7ch SE + 2ch DP 7ch SE + 2ch DP 7ch SE + 2ch DP Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 18 Freescale Semiconductor, Inc. Features MK60FX512VLQ15(R) MK60FN1M0VLQ15(R) MK60FX512VMD15(R) MK60FN1M0VMD15(R) Table 5. K60 150MHz Performance Table (continued) ADC3 8ch SE + 2ch DP 8ch SE + 2ch DP 8ch SE + 2ch DP 8ch SE + 2ch DP ADC DP 4ch 4ch 4ch 4ch ADC SE 48ch 48ch 48ch 48ch PGA 4 4 4 4 12-bit DAC 2 2 2 2 Analog Comparator 4 4 4 4 Analog Comparator Inputs 5/2/2/5 5/2/2/5 5/2/2/5 5/2/2/5 OPAMP - - - - TRIAMP - - - - Vref YES YES YES YES MC Partnumber Timers Motor Control/General purpose/PWM 2x8ch 2x8ch 2x8ch 2x8ch Quad decoder/General purpose/PWM 2x2ch 2x2ch 2x2ch 2x2ch FTM External CLK 2 2 2 2 Low Power Timer 1 1 1 1 PIT 1x4ch 1x4ch 1x4ch 1x4ch PDB 1 1 1 1 CMT(Carrier Module Transmitter) YES YES YES YES Communication Interfaces SDHC 8-bit, CLKIN 8-bit, CLKIN 8-bit, CLKIN 8-bit, CLKIN High Baudrate UART w/ ISO7816 2 2 2 2 High Baudrate UART 0 0 0 0 UART 4 4 4 4 SPI chip selects per module 6/4/2 6/4/2 6/4/2 6/4/2 I2C 2 2 2 2 I2S 2 2 2 2 CAN 2 2 2 2 USB OTG LS/FS w/ on-chip xcvr 1 1 1 1 USB OTG HS 1 1 1 1 Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 19 Core modules MC Partnumber MK60FX512VLQ15(R) MK60FN1M0VLQ15(R) MK60FX512VMD15(R) MK60FN1M0VMD15(R) Table 5. K60 150MHz Performance Table (continued) USB DCD YES YES YES YES USB 120mAReg YES YES YES YES Ethernet w /1588 MII / RMII MII / RMII MII / RMII MII / RMII IEEE1588 Timer 1x4ch, CLKIN 1x4ch, CLKIN 1x4ch, CLKIN 1x4ch, CLKIN Human-Machine Interface Segment LCD - - - - Graphic LCD - - - - TSI(Capacitive Touch) 16 input 16 input 16 input 16 input GPIO (w interrupt) 100 100 100 100 Operating Characteristics 5V Tolerant YES YES YES YES Voltage Range 1.71-3.6V 1.71-3.6V 1.71-3.6V 1.71-3.6V Flash Write V 1.71V 1.71V 1.71V 1.71V Temp Range -40 to 105C -40 to 105C -40 to 105C -40 to 105C 4.5 Module-by-module feature list The following sections describe the high-level module features for the family's superset device. See the previous section for differences among the subset devices. 4.5.1 Core modules 4.5.1.1 * * * * * * * * * ARM Cortex-M4 Core Supports up to 150 MHz frequency with 1.25DMIPS/MHz ARM Core based on the ARMv7 Architecture & Thumb(R)-2 ISA Microcontroller cores focused on very cost sensitive, deterministic, interrupt driven environments Harvard bus architecture 3-stage pipeline with branch speculation Integrated bus matrix Integrated Digital Signal Processor (DSP) Configurable nested vectored interrupt controller (NVIC) Advanced configurable debug and trace components K60 Family Product Brief, Rev. 8, 5/2011 20 Freescale Semiconductor, Inc. System modules * Embedded Trace Macrocell (ETM) * Optional single precision floating point unit (SPFPU) 4.5.1.2 * * * * * * Nested Vectored Interrupt Controller (NVIC) Close coupling with Cortex-M4 core's Harvard architecture enables low latency interrupt handling Up to 120 interrupt sources Includes a single non-maskable interrupt 16 levels of priority, with each interrupt source dynamically configurable Supports nesting of interrupts when higher priority interrupts are activated Relocatable vector table 4.5.1.3 Wake-up Interrupt Controller (WIC) * Supports interrupt handling when system clocking is disabled in low power modes * Takes over and emulates the NVIC behavior when correctly primed by the NVIC on entry to very-deep-sleep * A rudimentary interrupt masking system with no prioritization logic signals for wake-up as soon as a non-masked interrupt is detected * Contains no programmer's model visible state and is therefore invisible to end users of the device other than through the benefits of reduced power consumption while sleeping 4.5.1.4 Debug Controller * Serial Wire JTAG Debug Port (SWJ-DP) combines * external interface that provides a standard JTAG or cJTAG interface for debug access * external interface that provides a serial-wire bidirectional debug interface * Debug Watchpoint and Trace (DWT) with the following functionality: * four comparators configurable as a hardware watchpoint, an ETM trigger, a PC sampler event trigger, or a data address sampler event trigger * several counters or a data match event trigger for performance profiling * configurable to emit PC samples at defined intervals or to emit interrupt event information * Instrumentation Trace Macrocell (ITM) with the following functionality: * Software trace - writes directly to ITM stimulus registers can cause packets to be emitted * Hardware trace - packets generated by DWT are emitted by ITM * Time stamping - emitted relative to packets * Embedded Trace Macrocell (ETM) supports instruction trace * CoreSightTM Embedded Trace Buffer (ETB) is a memory-mapped buffer to store trace data. Allows reconstruction of program flow with standard JTAG tools. * Test Port Interface Unit (TPIU) acts as a bridge between ITM or ETM and an off-chip Trace Port Analyzer * Flash Patch and Breakpoints (FPB) implements hardware breakpoints and patches code and data from code space to system space 4.5.2 System modules 4.5.2.1 Power Management Control Unit (PMC) K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 21 System modules * * * * * * * * * * * Separate digital (regulated) and analog (referenced to digital) supply outputs Programmable power saving modes No output supply decoupling capacitors required Available wake-up from power saving modes via RTC and external inputs Integrated Power-on Reset (POR) Integrated Low Voltage Detect (LVD) with reset (brownout) capability Selectable LVD trip points Programmable Low Voltage Warning (LVW) interrupt capability Buffered bandgap reference voltage output Factory programmed trim for bandgap and LVD 1 kHz Low Power Oscillator (LPO) 4.5.2.2 DMA Channel Multiplexer (DMA MUX) * 16 independently selectable DMA channel routers * 4 periodic trigger sources available * Each channel router can be assigned to 1 of 64 possible peripheral DMA sources 4.5.2.3 * * * * * Up to 32 fully programmable channels with 32-byte transfer control descriptors Data movement via dual-address transfers for 8-, 16-, 32- and 128-bit data values Programmable source, destination addresses, transfer size, support for enhanced address modes Support for major and minor nested counters with one request and one interrupt per channel Support for channel-to-channel linking and scatter/gather for continuous transfers with fixed priority and round-robin channel arbitration 4.5.2.4 * * * * * * * * DMA Controller Watchdog Timer (WDOG) Independent, configurable clock source input Write-once control bits with unlock sequence Programmable timeout period Ability to test watchdog timer and reset Windowed refresh option Robust refresh mechanism Cumulative count of watchdog resets between power-on resets Configurable interrupt on timeout 4.5.2.5 External Watchdog Monitor (EWM) * Independent 1 kHz LPO clock source * Output signal to gate an external circuit which is controlled by CPU service or external input 4.5.2.6 System Clocks * Frequency-locked loop (FLL) * Digitally-controlled oscillator (DCO) * DCO frequency range is programmable * Option to program DCO frequency for a 32,768 Hz external reference clock source K60 Family Product Brief, Rev. 8, 5/2011 22 Freescale Semiconductor, Inc. Memories and Memory Interfaces * Internal or external reference clock can be used to control the FLL * 0.2% resolution using 32 kHz internal reference clock * 2% deviation over voltage and temperature using internal 32 kHz internal reference clock, 1% deviation with limited temperature range (0C to 70C) * Phase-locked loop (PLL) * Voltage-controlled oscillator (VCO) * External reference clock is used to control the PLL * Modulo VCO frequency divider Phase/Frequency detector * Integrated loop filter * Internal reference clock generator * Slow clock with nine trim bits for accuracy * Fast clock with four trim bits * Can be used to control the FLL * Either the slow or the fast clock can be selected as the clock source for the MCU * Can be used as a clock source for other on-chip peripherals * External clock from the Crystal Oscillator (XOSC) * Can be used to control the FLL and/or the PLL * Can be selected as the clock source for the MCU * * * * External clock monitor with reset request capability Lock detector with interrupt request capability for use with the PLL Auto Trim Machine (ATM) for trimming both the slow and fast internal reference clocks Multiple clock source options available for most peripherals 4.5.3 Memories and Memory Interfaces 4.5.3.1 On-Chip Memory * 100MHz performance devices * Up to 512KB program flash memory * Flexmemory block contains up to 256KB FlexNVM and 4KB FlexRAM with up to 4KB EEPROM capability * Up to 128KB SRAM * 120MHz performance devices * Up to 1024KB program flash memory * Flexmemory block contains up to 512KB FlexNVM and 16KB FlexRAM with up to 16KB EEPROM capability * Up to 128KB SRAM * 16KB cache * 150MHz performance devices * Up to 1024KB program flash memory * Flexmemory block contains up to 512KB FlexNVM and 16KB FlexRAM with up to 16KB EEPROM capability * Up to 128KB SRAM * 16KB cache * Security circuitry to prevent unauthorized access to RAM and flash contents 4.5.3.2 External Bus Interface (FlexBus) K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 23 Security and Integrity * Six independent, user-programmable chip-select signals that can interface with external SRAM, PROM, EPROM, EEPROM, flash, and other peripherals * Supports up to 2 GB addressable space * 8-, 16- and 32-bit port sizes with configuration for multiplexed or non-multiplexed address and data buses * Byte-, word-, longword-, and 16-byte line-sized transfers * Programmable address-setup time with respect to the assertion of chip select * Programmable address-hold time with respect to the negation of chip select and transfer direction 4.5.3.3 Serial Programming Interface (EzPort) * Same serial interface as, and subset of, the command set used by industry-standard SPI flash memories * Ability to read, erase, and program flash memory * Reset command to boot the system after flash programming 4.5.3.4 * * * * * * * Supports glueless interface to LPDDR, DDR and DDR2 DRAM devices Support for 16-bit fixed memory port width 16-byte critical word first burst transfer Up to 16 lines of row address, up to 16 column address lines, 2 bits of bank address, and up to two chip selects Supports up to 256 MByte of memory; minimum memory configuration of 8 Supports page mode to maximize the data rate Supports sleep mode and self-refresh mode 4.5.3.5 * * * * * * * * DDR Controller NAND Flash Controller 8- and 16-bit NAND flash interface 9 KB RAM buffer Supports all NAND flash products regardless of density/organization Supports flash device commands Integrated DMA engine Two configurable DMA channels Optional ECC mode supports 4/6/8/12/16/24/32-bit error correction Boot from page size 2KB flash (x8) without extra control 4.5.4 Security and Integrity 4.5.4.1 * * * * * * * Cyclic Redundancy Check (CRC) Hardware CRC generator circuit using 16/32-bit shift register User Configurable 16/32 bit CRC Programmable Generator Polynomial Error detection for all single, double, odd, and most multi-bit errors Programmable initial seed value High-speed CRC calculation Optional feature to transpose input data and CRC result via transpose register, required on applications where bytes are in lsb format K60 Family Product Brief, Rev. 8, 5/2011 24 Freescale Semiconductor, Inc. Analog 4.5.4.2 Hardware Cryptographic Acceleration Unit (CAU) * Supports DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms * Simple C calls to optimized security functions provided by Freescale 4.5.4.3 Random Number Generator (RNG) * Supports the key generation algorithm defined in the Digital Signature Standard * http://www.itl.nist.gov/fipspubs/fip186.htm * Integrated entropy sources capable of providing the PRNG with entropy for its seed 4.5.4.4 * * * * * * * * * * * Tamper Detect Analog tamper detects (voltage, temperature, and clock) External tamper detects Active wire-mesh tamper detect Internal tamper detects (flash security and secure SRAM) Register locks, tamper enables and analog trim configuration bits Secure RTC with added support for automatic compensation 32-bit monotonic counter 256-bit secure storage (asynchronously erased on tamper detect) 32- to 256-bit general-purpose storage (not erased) Single backup supply Voltage monitor * Active-low enable (minimum leakage power when disabled) * Active-low output which asserts when voltage is lower than 1.5V to 1.62V or higher than 3.6V to 4V * Temperature monitor * Active-low enable (minimum leakage power when disabled) * Active-low output which asserts when temperature is lower than -50C to -100C or higher than 125C to 175C * Clock monitor * Active-low enable (minimum leakage power when disabled) * Active-low output which asserts when clock < ~16 kHz or > ~1 MHz 4.5.5 Analog 4.5.5.1 16-bit Analog-to-Digital Converter (ADC) * Linear successive approximation algorithm with up to 16-bit resolution * Output modes: * Differential 16-bit, 13-bit, 11-bit, and 9-bit modes, in two's complement 16-bit sign-extended format * Single-ended 16-bit, 12-bit, 10-bit, and 8-bit modes, in right-justified unsigned format * * * * Single or continuous conversion Configurable sample time and conversion speed/power Conversion complete and hardware average complete flag and interrupt Input clock selectable from up to four sources K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 25 Analog * * * * * * * * Operation in low power modes for lower noise operation Asynchronous clock source for lower noise operation with option to output the clock Selectable asynchronous hardware conversion trigger with hardware channel select Automatic compare with interrupt for various programmable values Temperature sensor Hardware average function Selectable voltage reference Self-calibration mode 4.5.5.2 * * * * High-Speed Analog Comparator (CMP) 6-bit DAC programmable reference generator output Up to eight selectable comparator inputs; each input can be compared with any input by any polarity sequence Selectable interrupt on rising edge, falling edge, or either rising or falling edges of comparator output Comparator output supports: * Sampled * Windowed (ideal for certain PWM zero-crossing-detection applications * Digitally filtered using external sample signal or scaled peripheral clock * Two performance modes: * Shorter propagation delay at the expense of higher power * Low power, with longer propagation delay * Operational in all MCU power modes 4.5.5.3 12-Bit Digital-to-Analog Converter (DAC) * 12-bit resolution * Guaranteed 6-sigma monotocity over input word * High- and low-speed conversions * 1 s conversion rate for high speed, 2 s for low speed * * * * * Power-down mode Choice of asynchronous or synchronous updates Automatic mode allows the DAC to generate its own output waveforms including square, triangle, and sawtooth Automatic mode allows programmable period, update rate, and range DMA support with configurable watermark level 4.5.5.4 Voltage Reference (VREF) * Programmable trim register with 0.5mV steps, automatically loaded with room temp value upon reset * Programmable mode selection: * Off * Bandgap out (or stabilization delay) * Low-power buffer mode * Tight-regulation buffer mode * 1.2V output at room temperature * Dedicated output pin K60 Family Product Brief, Rev. 8, 5/2011 26 Freescale Semiconductor, Inc. Timers 4.5.6 Timers 4.5.6.1 Programmable Delay Block (PDB) * Up to 15 trigger input sources and software trigger source * Up to eight configurable PDB channels for ADC hardware trigger * One PDB channel is associated with one ADC. * One trigger output for ADC hardware trigger and up to eight pre-trigger outputs for ADC trigger select per PDB channel * Trigger outputs can be enabled or disabled independently. * One 16-bit delay register per pre-trigger output * Optional bypass of the delay registers of the pre-trigger outputs * Operation in One-Shot or Continuous modes * Optional back-to-back mode operation, which enables the ADC conversions complete to trigger the next PDB channel * One programmable delay interrupt * One sequence error interrupt * One channel flag and one sequence error flag per pre-trigger * DMA support * Up to eight DAC interval triggers * One interval trigger output per DAC * One 16-bit delay interval register per DAC trigger output * Optional bypass the delay interval trigger registers * Optional external triggers * Up to eight pulse outputs (pulse-out's) * Pulse-out's can be enabled or disabled independently. * Programmable pulse width 4.5.6.2 * * * * * * * * * * * * * * * FlexTimers (FTM) Selectale FTM source clock Programmable prescaler 16-bit counter supporting free-running or initial/final value, and countin is up or up-down Input capture, output compare, and edge-aligned and center-aligned PWM modes Input capture and output compare modes Operation of FTM channels as pairs with equal outputs, pairs with complimentary outputs, or independent channels with independent outputs Deadtime insertion is available for each complementary pair Generation of hardware triggers Software control of PWM outputs Up to 4 fault inputs for global fault control Configurable channel polarity Programmable interrupt on input capture, reference compare, overflowed counter, or detected fault condition Quadrature decoder with input filters, relative position counting, and interrupt on position count or capture of position count on external event DMA support for FTM events Global time base mode shares single time base across multiple FTM instances K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 27 Timers 4.5.6.3 * * * * * Programmable Interrupt Timers (PITs) Up to 4 general purpose interrupt timers Up to 4 interrupt timers for triggering ADC conversions 32-bit counter resolution Clocked by system clock frequency DMA support 4.5.6.4 Low Power Timer * Operation as timer or pulse counter * Selectable clock for prescaler/glitch filter * 1 kHz internal LPO * External low power crystal oscillator * Internal reference clock (not available in low leakage power modes) * Secondary external reference clock (for example, 32 kHz crystal) * Configurable glitch filter or prescaler * Interrupt generated on timer compare * Hardware trigger generated on timer compare 4.5.6.5 Carrier Modulator Timer (CMT) * Four modes of operation * Time with independent control of high and low times * Baseband * Frequency shift key (FSK) * Direct software control of CMT_IRO signal * * * * Extended space operation in time, baseband, and FSK modes Selectable input clock divider Interrupt on end of cycle Ability to disable CMT_IRO signal and use as timer interrupt 4.5.6.6 Real-Time Clock (RTC) * Independent power supply, POR and 32 kHz crystal oscillator * 32-bit seconds counter with 32-bit alarm * Can be invalidated on detection of tamper detect * 16-bit prescaler with compensation * Register write protection * Hard Lock requires VBAT POR to enable write access * Soft lock requires system reset to enable write/read access K60 Family Product Brief, Rev. 8, 5/2011 28 Freescale Semiconductor, Inc. Communication interfaces 4.5.7 Communication interfaces 4.5.7.1 10/100Mbps Ethernet MAC * Ethernet controller with 10/100 BaseT/TX capability; half duplex or full duplex * Hardware support for IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE 1588 * Media independent interface (MII) and reduced media independent interface (RMII) support * Built-in unified DMA * On-chip transmit and receive FIFOs * Supports legacy buffer descriptor programming models and functionality * Enchanced buffer descriptor programming model for new Ethernet functionality * Supports wake-up from low power mode through magic packets * Multiple clock source options for time-stamping clock 4.5.7.2 USB On-The-Go Module (FS/LS) * Complies with USB specification rev 2.0 * USB host mode * Supports enhanced-host-controller interface (EHCI) * Allows direct connection of FS/LS devices without an OHCI/UHCI companion controller * Supported by Linux and other commercially available operating systems * USB device mode * Full-speed operation via the on-chip transceiver * Supports one upstream facing port * Supports four programmable, bidirectional USB endpoints, including endpoint 0 * Suspend mode/low power * As host, firmware can suspend individual devices or the entire USB and disable chip clocks for low-power operation * Device supports low-power suspend * Remote wake-up supported for host and device * Integrated with the processor's low power modes * Includes an on-chip full-speed (12 Mbps) and low-speed (1.5 Mbps) transceiver 4.5.7.3 USB Device Charger Detect (USBDCD) * Compatible with systems powered from: * Rechargable battery * Non-rechargable battery * External 3.3v LDO regulator powered from USB or * Directly from USB using internal regulator * Programmable event timers for flexibility and better compatibility with future udpates to the standards * Compliant with the latest industry standard specification, USB Battery Charging Specification, Revision 1.1 K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 29 Communication interfaces 4.5.7.4 * * * * * USB Voltage Regulator 5V regulator input typically provided by USB VBUS power 3.3V regulated output powers on-chip USB transceiver Output pin from regulator can be used to power external board components and source up to 120mA Eliminates cost of external LDO 3.3V regulated output can power MCU main power supply 4.5.7.5 USB On-The-Go Module (HS/FS/LS) * Complies with USB specification rev 2.0 * USB host mode * Supports enhanced-host-controller interface (EHCI) * HS/FS/LS operation via an external ULPI transceiver * Supported by Linux and other commercially available operating systems * USB device mode * HS/FS operation via an external ULPI transceiver * Supports one upstream facing port * Supports four programmable, bidirectional USB endpoints, including endpoint 0 * Suspend mode/low power * As host, firmware can suspend individual devices or the entire USB and disable chip clocks for low-power operation * Device supports low-power suspend * Remote wake-up supported for host and device * Integrated with the processor's low power modes * Support for off-chip HS/FS/LS transceiver * External ULPI transceiver supports high speed (480 Mbps), full speed, and low speed operation in host mode, and high-speed and full-speed operation in device mode * Interface uses 8-bit single-data-rate ULPI data bus * ULPI PHY supplies a 60 MHz USB reference clock input to the processor 4.5.7.6 CAN Module * Supports the full implementation of the CAN Specification Version 2.0, Part B * Standard data and remote frames (up to 109 bits long) * Extended data and remote frames (up to 127 bits long) * 0-8 bytes data length * Programmable bit rate up to 1 Mbit/sec * Content-related addressing * Flexible message buffers (MBs), totalling up to 16 message buffers of 0-8 bytes data length each, configurable as Rx or Tx, all supporting standard and extended messages * Listen-only mode capability * Individual mask registers for each message buffer * Programmable transmit-first scheme: lowest ID or lowest buffer number * Timestamp based on 16-bit free-running timer * Global network time, synchronized by a specific message K60 Family Product Brief, Rev. 8, 5/2011 30 Freescale Semiconductor, Inc. Communication interfaces 4.5.7.7 * * * * * * * * * * * * * Master and slave mode Full-duplex, three-wire synchronous transfers Programmable transmit bit rate Double-buffered transmit and receive data registers Serial clock phase and polarity options Slave select output Mode fault error flag with CPU interrupt capability Control of SPI operation during wait mode Selectable MSB-first or LSB-first shifting Programmable 8-bit or 16-bit data transmission length Receive data buffer hardware match feature 64-bit FIFO mode for high speed transfers of large amounts of data Support for both transmit and receive by DMA 4.5.7.8 * * * * * * * * * * Serial Peripheral Interface (SPI) Inter-Integrated Circuit (I2C) Compatible with I2C bus standard and SMBus Specification Version 2 features Up to 100 kbps with maximum bus loading Multi-master operation Software programmable for one of 64 different serial clock frequencies Programmable slave address and glitch input filter Interrupt or DMA driven byte-by-byte data transfer Arbitration lost interrupt with automatic mode switching from master to slave Calling address identification interrupt Bus busy detection broadcast and 10-bit address extension Address matching causes wake-up when processor is in low power mode 4.5.7.9 UART * * * * * * * * * * * * * Support for ISO 7816 protocol for interfacing with smartcards Full-duplex operation Standard mark/space non-return-to-zero (NRZ) format 13-bit baud rate selection with fractional divide of 32 Programmable 8-bit or 9-bit data format Separately enabled transmitter and receiver Programmable transmitter output polarity Programmable receive input polarity 13-bit break character option 11-bit break character detection option Parameterizable buffer support for one dataword for each transmit and receive Independent FIFO structure for transmit and receive Two receiver wakeup methods: * Idle line wakeup * Address mark wakeup * * * * * Address match feature in receiver to reduce address mark wakeup ISR overhead Interrupt or DMA driven operation Receiver framing error detection Hardware parity generation and checking 1/16 bit-time noise detection K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 31 Human-machine interface 4.5.7.10 Secure Digital Host Controller (SDHC) * Compatible with the following specifications: * SD Host Controller Standard Specification, Version 2.0 (http://www.sdcard.org ) with test event register and advanced DMA support * MultiMediaCard System Specification, Version 4.2 (http://www.mmca.org ) * SD Memory Card Specification, Version 2.0 (http://www.sdcard.org ), supporting high capacity SD memory cards * SDIO Card Specification, Version 2.0 (http://www.sdcard.org ) * CE-ATA Card Specification, Version 1.0 (http://www.sdcard.org ) * Designed to work with CE-ATA, SD Memory, miniSD Memory, SDIO, miniSDIO, SD Combo, MMC, MMCplus, and RS-MMC cards * SD bus clock frequency up to 50 MHz * Supports 1-/4-bit SD and SDIO modes, 1-/4-/8-bit MMC modes, 1-/4-/8-bit CE-ATA devices * Up to 200 Mbps data transfer for SD/SDIO cards using four parallel data lines * Up to 416 Mbps data transfer for MMC using 8 parallel data lines * Single- and multi-block read and write * 1-4096 byte block size * Write-protection switch for write operations * Synchronous and asynchronous abort * Pause during the data transfer at a block gap * SDIO read wait and suspend/resume operations * Auto CMD12 for multi-block transfer * Host can initiate non-data transfer commands while the data transfer is in progress * Allows cards to interrupt the host in 1- and 4-bit SDIO modes * Supports interrupt period, defined in the SDIO standard * Fully configurable 128 x 32-bit FIFO for read/write data * Internal DMA capabilities * Supports voltage selection by configuring vendor specific register bit * Supports advanced DMA to perform linked memory access 4.5.7.11 Synchronous Serial Interface (I2S) * Independent (asynchronous) or shared (synchronous) transmit and receive sections with separate or shared internal/ external clocks and frame syncs, operating in master or slave mode intended for audio support * Master or slave mode operation * Normal mode operation using frame sync * Network mode operation allowing multiple devices to share the port with up to 32 time slots * Programmable data interface modes, such as I2S, LSB aligned, and MSB aligned * Programmable word length (8, 10, 12, 16, 18, 20, 22 or 24 bits) * AC97 support 4.5.8 Human-machine interface 4.5.8.1 General Purpose Input/Output (GPIO) * Progammable glitch filter and interrupt with selectable polarity on all input pins * Hysteresis and configurable pull up/down device on all input pins * Configurable slew rate and drive strength on all output pins K60 Family Product Brief, Rev. 8, 5/2011 32 Freescale Semiconductor, Inc. Power modes * Independent pin value register to read logic level on digital pin * Optional devices with 5V tolerance 4.5.8.2 * * * * * Touch Sensor Input (TSI) 16 channel inputs, supporting up to 16 individual touch buttons 4 touch buttons can be combined for a slider Configurable button- and slider-sensitive interrupts Operation in low-power modes allows wakeup from lowest power mode via a single touch Option to use internal reference clock 5 Power modes The power management controller (PMC) provides the user with multiple power options. All together 10 different modes of operation are supported to allow the user to optimize power consumption for the level of functionality needed. Depending on the stop requirements of the user application, a variety of stop modes are available that provide state retention, partial power down or full power down of certain logic and/or memory. I/O states are held in all modes of operation. The following table compares the various power modes available. For each run mode there is a corresponding wait and stop mode. Wait modes are similar to ARM sleep modes. Stop modes (VLPS, STOP) are similar to ARM sleep deep mode. The very low power run (VLPR) operating mode can drastically reduce runtime power when the maximum bus frequency is not required to handle the application needs. The three primary modes of operation are run, wait and stop. The WFI instruction invokes both wait and stop modes for the chip. The primary modes are augmented in a number of ways to provide lower power based on application needs. Table 6. Chip power modes Chip mode Description Normal run Allows maximum performance of chip. Default mode out of reset; onchip voltage regulator is on. Normal Wait via WFI Allows peripherals to function while the core is in sleep mode, reducing power. NVIC remains sensitive to interrupts; peripherals continue to be clocked. Normal Stop via WFI Places chip in static state. Lowest power mode that retains all registers while maintaining LVD protection. NVIC is disabled; AWIC is used to wake up from interrupt; peripheral clocks are stopped. Core mode Normal recovery method Run - Sleep Interrupt Sleep Deep Interrupt VLPR (Very Low Power Run) On-chip voltage regulator is in a low power mode that supplies only enough power to run the chip at a reduced frequency. Reduced frequency Flash access mode (1 MHz); LVD off; internal oscillator provides a low power 24 MHz source for the core, the bus and the peripheral clocks. Run Interrupt VLPW (Very Low Power Wait) -via WFI Same as VLPR but with the core in sleep mode to further reduce power; NVIC remains sensitive to interrupts (FCLK = ON). On-chip voltage regulator is in a low power mode that supplies only enough power to run the chip at a reduced frequency. Sleep Interrupt Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 33 Developer Environment Table 6. Chip power modes (continued) Chip mode Description Core mode Normal recovery method VLPS (Very Low Power Stop)-via WFI Places chip in static state with LVD operation off. Lowest power mode with ADC and pin interrupts functional. Peripheral clocks are stopped, but LPTimer, RTC, CMP, TSI, DAC can be used. NVIC is disabled (FCLK = OFF); AWIC is used to wake up from interrupt. On-chip voltage regulator is in a low power mode that supplies only enough power to run the chip at a reduced frequency. All SRAM is operating (content retained and I/O states held). Sleep Deep Interrupt LLS (Low Leakage Stop) State retention power mode. Most peripherals are in state retention mode (with clocks stopped), but LLWU, LPTimer, RTC, CMP, TSI, DAC can be used. NVIC is disabled; LLWU is used to wake up. Sleep Deep Wakeup Interrupt1 Sleep Deep Wakeup Reset2 Sleep Deep Wakeup Reset2 Sleep Deep Wakeup Reset2 Off Power-up Sequence NOTE: The LLWU interrupt must not be masked by the interrupt controller to avoid a scenario where the system does not fully exit stop mode on an LLS recovery. All SRAM is operating (content retained and I/O states held). VLLS3 (Very Low Leakage Stop3) Most peripherals are disabled (with clocks stopped), but LLWU, LPTimer, RTC, CMP, TSI, DAC can be used. NVIC is disabled; LLWU is used to wake up. SRAM_U and SRAM_L remain powered on (content retained and I/O states held). VLLS2 (Very Low Leakage Stop2) Most peripherals are disabled (with clocks stopped), but LLWU, LPTimer, RTC, CMP, TSI, DAC can be used. NVIC is disabled; LLWU is used to wake up. SRAM_L is powered off. A portion of SRAM_U remains powered on (content retained and I/O states held). VLLS1 (Very Low Leakage Stop1) Most peripherals are disabled (with clocks stopped), but LLWU, LPTimer, RTC, CMP, TSI, DAC can be used. NVIC is disabled; LLWU is used to wake up. All of SRAM_U and SRAM_L are powered off. The 32-byte system register file and the 32-byte VBAT register file remain powered for customer-critical data. BAT (backup battery only) The chip is powered down except for the VBAT supply. The RTC and the 32-byte VBAT register file for customer-critical data remain powered. 1. Resumes normal run mode operation by executing the LLWU interrupt service routine. 2. Follows the reset flow with the LLWU interrupt flag set for the NVIC. 6 Developer Environment Freescale's products are supported by a widespread, established network of tools and third party developers and software vendors. The Kinetis families take advantage of these and similar development resources. K60 Family Product Brief, Rev. 8, 5/2011 34 Freescale Semiconductor, Inc. Developer Environment 6.1 Freescale's Tower System Support Freescale's Tower System is a modular development platform for 8-bit, 16-bit, and 32-bit microcontrollers that enables advanced development through rapid prototyping. Featuring multiple development boards or modules, the Tower System provides designers with building blocks for entry-level to advanced microcontroller development. The Freescale Tower System Primary Elevator MCU/ MPU Module * Common serial and expansion bus signals * Tower controller board * Works stand-alone or in Tower System * Two 2x80 connectors on backside for easy signal access and side-mounting board (i.e. LCD module) * Features new on-board debug interface for easy programming and debugging via mini-B USB cable * Power regulation circuitry Secondary Elevator * Standardized signal assignments * Additional serial and expansion buses and peripheral interfaces Board Connectors * Four card-edge connectors * Uses PCI Express(R) connectors (x16, 90 mm/3.5" long, 164 pins) Peripheral Module Size * (i.e. serial, prototype, etc.) * Tower is approx. 3.5" H x 3.5" W x 3.5" D when fully assembled Figure 4. Freescale's Tower System The following Tower modules are available for the Kinetis families. For more information on the Tower System see http:// www.freescale.com/tower. Table 7. Tower Modules for Kinetis MCU Families Microcontroller Modules Kinetis K40 Family MCU Module Features K40 family 512 KB flash MCU in 144 MAPBGA package On-board JTAG debug interface Access to all features including Segment LCD and USB Kinetis K60 Family MCU Module K60 family 512 KB flash MCU in 144 MAPBGA package On-board JTAG debug interface Access to all features including Ethernet and USB Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 35 Developer Environment Table 7. Tower Modules for Kinetis MCU Families (continued) Microcontroller Modules Features Kinetis K53 Family MCU Module K53 family 512 KB flash MCU in 144 MAPBGA package On-board JTAG debug interface Access to all features including Ethernet, USB, Segment LCD (TWRPI), and medical expansion connector 6.2 CodeWarrior Development Studio Freescale's CodeWarrior Development Studio for Microcontrollers v10.x integrates the development tools for the RS08, HCS08, ARM, and ColdFire architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is becoming a standard framework used by many embedded software vendors. * Eclipse IDE 3.4 * Build system with optimizing C/C++ compilers for RS08, HCS08, ARM, and ColdFire processors * Extensions to Eclipse C/C++ Development Tools (CDT) to provide sophisticated features to troubleshoot and repair embedded applications Table 8. CodeWarrior 10.x Differentiating Features Differentiating features MCU Change Wizard Customer benefits Ability to easily retarget project to a new processor Details Simply select a new device (from the same or a different architecture) and select the default connection, and the CodeWarrior tool suite automatically reconfigures the project for the new device with the correct build tools and support files. * * * * * * * Compiler Assembler Linker Header files Vector tables Libraries Linker configuration files Freescale Problems in Combines easy-to-use component-based application creation with an expert knowledge Processor Expert hardware system. layer can be * CPU, on-chip peripherals, external peripherals, and software functionality are resolved encapsulated into embedded components during initial * Each component's functionality can be tailored to fit application requirements by design phase modifying the component's properties, methods and events * When the project is built, Processor Expert automatically generates highly optimized embedded C code and places the source files into the project * Graphical user interface: Allows an application to be specified by the functionality needed * Automatic code generator: Creates tested, optimized C code tuned to application needs and the selected Freescale device * Built-in knowledgebase: Immediately flags resource conflicts and incorrect settings, so errors are caught early in design cycle * Component wizard: Allows user-specific, hardware-independent embedded components to be created Table continues on the next page... K60 Family Product Brief, Rev. 8, 5/2011 36 Freescale Semiconductor, Inc. Developer Environment Table 8. CodeWarrior 10.x Differentiating Features (continued) Differentiating features Customer benefits Trace and profile Sophisticate support for ond emulatorchip trace buffers like debug capability without additional hardware Details The CodeWarrior profiling and analysis tools provide visibility into an application as it runs on the processor to identify operational problems. * * * * Supports architectures with on-chip trace buffers (HCS08, V1 ColdFire, ARM) Allows tracepoints to be set to enable and disable trace output Can step through trace data and the corresponding source code simultaneously Allows trace data to be exported into a Microsoft(R) Excel(R) file For more information see the CodeWarrior web site at http://www.freescale.com/codewarrior. 6.3 Freescale's MQXTM Software Solutions The increasing complexity of industrial applications and expanding functionality of semiconductors are driving embedded developers toward solutions that combine proven hardware and software platforms. These solutions help accelerate time to market and improve application development success. Freescale Semiconductor offers the MQX real-time operating system (RTOS), with TCP/IP and USB software stacks and peripheral drivers, to customers of ARM, ColdFire and ColdFire+ MCUs at no additional charge. The combination of Freescale's MQX software solutions and Freescale's silicon portfolio creates a comprehensive source for hardware, software, tools, and services. K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 37 Developer Environment Freescale Comprehensive Solution CodeWarriorTM Development Environment (MQX OS Aware) CodeWarrior Processor ExpertTM MQX Design and Development Tools Demo Code Customized Applications Application Tasks and Industry-Specific Libraries MQX RTOS Optional Services Ethernet (RTCS) USB File System CAN Core Services MQX RTOS Third Party: IAR (MQX OS Aware) Open Source BDM and Third Party: Emulator/Probe Applications BSP/PSP BDM/JTAG Microcontroller Discrete Driver, Third Party and Freescale Application Enablement Layer HAL Hardware On Device PC Hosted Figure 5. MQX Comprehensive Solution Key benefits of Freescale's MQX RTOS include: * Small memory footprint: The RTOS was designed for speed and size efficiency in embedded systems. It delivers true real-time performance, with context switching and low-level interrupt routines hand-optimized in assembly. * Component-based architecture: Provides a fully-functional RTOS core with additional, optional services. Freescale's MQX RTOS includes 25 components (8 core components and 17 optional). Components are linked in only if needed, preventing unused functions from bloating the memory footprint. * Full and lightweight components: Key components are included in both full and lightweight versions for further control of size, RAM/ROM utilization, and performance options. * Real-time, priority-based, preemptive multithreading: Allows high-priority threads to meet their deadlines consistently, no matter how many other threads are competing for CPU time. * Scheduling: Enables faster development time by offloading from developers the task of creating or maintaining an efficient scheduling system and interrupt handling. * Code reuse: Provides a framework with a simple, intuitive API to build and organize the features across Freescale's broad portfolio of embedded processors. K60 Family Product Brief, Rev. 8, 5/2011 38 Freescale Semiconductor, Inc. Developer Environment * Fast boot sequence: Ensures the application is running quickly after the hardware has been reset. * Simple Message Passing: Messages can be passed either from a system pool or a private pool, sent with either urgent status or a user-defined priority, and broadcast or task specific. For maximum flexibility, a receiving task can operate on either the same CPU as the sending task or on a different CPU within the same system. For more information see the MQX web site at http://www.freescale.com/mqx. MQX RTOS--Customizable Component Set Queues Name Services Interrupts Messages Partitions Task Management Watchdogs Utilities Task Errors Lightweight Semaphores Events Initialization Core Core Memory Services Semaphores Mutexes Automatic Task Creation Timers RR and FIFO IPCs Scheduling Formatted Exception I/O Handling I/O Kernel Subsystems Log Logs Task Queue Scheduling As-Needed Figure 6. MQX Customizable Component Set 6.4 Additional Software Stacks Provided * * * * * * * * Math, DSP and Encryption Libraries Motor Control Libraries Touch Sensing Software Suite Complimentary Bootloaders (USB, Ethernet, RF, serial) Complimentary Freescale Embedded GUI Complimentary Freescale MQXTM RTOS , USB, TCP/IP stack and MFS filesystem Low Cost NanoTM SSL/NanoTM SSH for Freescale MQXTM RTOS Plus full ARM(R) ecosystem K60 Family Product Brief, Rev. 8, 5/2011 Freescale Semiconductor, Inc. 39 Revision History 7 Revision History The following table provides a revision history for this document. Table 9. Revision History Rev. No. Date Substantial Changes 4 6/2010 Initial public revision 5 7/2010 Removed 180 MHz product offerings throughout Updated block diagram to show USB LS/FS transceiver Added package dimensions to "Part numbers diagrams" table and to Kinetis portfolio tables Added FlexMemory section Added NAND flash controller feature list section Added maximum SPI transfer rates in SPI feature list Added link to CodeWarrior web site in CodeWarrior Development Studio section 6 11/2010 Updated memory and package option table Updated family feature tables 7 2/2011 Replaced 104-pin product offerings with 121-pin devices Updated memory and package option table Updated family feature tables 8 5/2011 Updated memory and package option table Updated family feature tables Updated module feature lists K60 Family Product Brief, Rev. 8, 5/2011 40 Freescale Semiconductor, Inc. How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 +1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center 1-800-441-2447 or +1-303-675-2140 Fax: +1-303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: K60PB Rev. 8, 5/2011 Information in this document is provided solely to enable system and sofware implementers to use Freescale Semiconductors products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claims alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical characteristics as their non-RoHS-complaint and/or non-Pb-free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale's Environmental Products program, go to http://www.freescale.com/epp. FreescaleTM and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. (c) 2010-2011 Freescale Semiconductor, Inc.