Specifications subject to change without notification. Tolerances unless otherwise specified are .xx +/- .02, xxx +/- .005
Specials requiring closer toler ances, different frequency ranges, special connectors
different materials, finishes, etc. can be furnished upon request.
RLC ELECTRONICS, INC.
83 Radio Circle, Mount Kisco, New York 10549 T elephone 914-241-13 34 Fax 914-241-1753
e-mail: sales@rlcelectronics.com www.rlcelectronics.com
Miniature Ultra-Flat
Schottky Detectors
RLC Electronics’ miniature ultra-flat detectors
utilize a zero-bias Schottky design. The
microwave power is coupled directly to the
extremely small components reducing package
parasitics and transition mismatches. This
design results in a very low VSWR and a flat,
smooth output over a wide bandwidth. Options
available include negative or positive output, a
choice of three output connectors and operation to
26.5 or 40 GHz.
Specifications
CR-1-2-3
Frequency Range .01-18.5GHz .01-26.5 GHz
(Option-26) .01-40 GHz
(Option-40)
Frequency Response (Max)
.01-18 GHz
.01-26.5 GHz
.01-40 GHz
+/-0.5 dB
-----
-----
+/-0.5 dB
+/-1 dB
------
+/-.5 dB
+/-1.0 dB
+/-1.5 dB
VSWR (Max)
.01-12.4 GHz
12.4-18.5 GHz
18.5-26.5 GHz
26.5-40 GHz
1.25
1.50
-----
-----
1.25
1.50
2.00
-----
1.25
1.50
2.00
2.00
Typical Sensitivity
(Pin< - 30 dBm)
0.5 mV/uW
0.5 mV/uW
0.5 mV/uW
Input Power: 100 mW maximum (peak or
average)
Video Resistance: 5000 ohms nominal
Input Connector Type: ‘SMA’ male,
except 2.92mm for –40 option
Temperature Range: -55 d eg C to +100 deg C
Bias: None
To designate the detector desired use:
(1) 301 for negative output 302 for positive o utput
(2) Output connector: R for ‘SMA’ female
B for ‘BNC’ female S for ‘SMC’ jack
(3) 26 for 26.5 GHz option, 40 for 40 GHz option
Example: CR-301-R-26 is a .01-26.5 GHz, negative output detector with a ‘SMA’
female output connector.
OUTLINE DRAWING
