LP18-400_Silverline 041594 11/8/2012 3:17 PM Page 1 ISO 9001 Certified (R) Times Protect LP-18-400-N Connector Protector * Eliminates the Need for Separate Cable Connector * Attaches Directly to LMR(R)-400 Cable * Uses EZ-400-X (No Braid Trim) Connector Interface * DC Pass Multi-Strike Broadband Bidirectional Design * Fully Weatherized Housing * Solid Brass Construction * White Bronze Plated for Durability and Long Life Cable Connector and Lightning Protector in One! The Times Protect(R) LP-18-400-N series is an exceptional in-line broadband DC pass surge protection design incorporating lightning protection circuitry and the EZ-400-X series crimp style connector interface unit. This combination allowing the in-line surge protector to be attached directly to the LMR(R)-400 cable eliminates the cable connector needed when using conventional lightning protectors. The LP-18-400-N series protectors exhibit outstanding RF performance over the entire frequency spectrum from DC through 6000MHz and the elimination of the extra connector further reduces return loss, insertion loss and lowers cost. In addition, its fully weatherized housing meets the IP-67 standard for outdoor as well as indoor installation. LP-18-400-N Series: * LP-18-400-NF-X (150W) N Female connector on one side and EZ-400-X crimp style interface on the other side - bidirectional * LP-18-400-NMH-X (150W) N Male connector on one side and EZ-400-X crimp style interface on the other side - bidirectional The LP-18-400-N series protectors install easily onto LMR(R)-400 cable using the standard CST-400 prep tool and either the CT-400/300 crimp tool or the HX-4 crimp handle with the Y1719 (0.429") hex dies. An Amphenol Company LP18-400_Silverline 041594 11/8/2012 3:18 PM Page 2 Times-Protect (R) Electrical Specifications Impedance 50 Frequency Range VSWR/Return Loss DC-6000 MHz < 1.15:1 / <23dB (DC-6000MHz) <0.15dB (DC-6000MHz) Insertion Loss Crimp ring * LP-18-400-NF-X DC Pass N Type Female 10kA multiple (8x20s wave-form) Maximum Surge Current Impulse Sparkover 700V (1kV/s) Turn on Average Power 180Vdc 150 Watts Protection Circuit DC Pass Mechanical / Environmental Specifications Temp Range Storage/Operating Weatherization Thermal Shock Vibration Crimp ring * LP-18-400-NMH-X DC Pass N Type Male US MIL-STD 202, Meth.204,Cond.B US MIL-STD 202, Meth.213,Cond.I Shock RoHS Compliant *All Dimensions shown in inches Installation Tools: CST-400 Prep Tool CT-400/300 Crimp Tool or HX-4 Crimp Tool with Y1719 (0.429") hex dies Wear/Mating Cycles Recommended Coupling Nut Torque Unit Weight CST-400 HX-4 and Y1719 LLog og M 5.000 dB/0.00dB Yes 500 minimum 7 to 10 lb-in 3.4 oz / 95 grams Material Specifications Component CT-400/300 -40C - +85C IEC 60068 40/085/21 & IP67 US MIL-STD 202, Meth.107,Cond.B Material Body Inner Conductor Male Inner Conductor Female Washer Coupling Nut Insulator O-Ring Brass Brass Phosphor Bronze Brass Brass PTFE Silicone Rubber Plating White Bronze Silver Silver White Bronze White Bronze --- Log M 0.050 dB/0.00 Note: IL and RL data without LMR(R)-400 cable World Headquarters: 358 Hall Avenue, Wallingford, CT 06492 * Tel: 203 -949 -8400, 1-800-867-2629 * Fax: 203-949 -8423 International Sales: 4 School Brae, Dysart, Kirkcaldy, Fife, Scotland KY1 2XB UK * Tel: +44(0)1592655428 China Sales: No. 318 Yuan Shan Road, Shanghai 201108 China * Tel: 86-21-51761234 * Fax: 86-21-64424098 www.timesmicrowave.com (c) 2012, Times Microwave Systems, Wallingford, CT 06492 LP-18-400 11/12