LCA715 Single-Pole, Normally Open 6-Pin OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Ratings 60 2.2 0.15 Units VP Arms / ADC Features * 3750Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Small 6-Pin Package * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Description The LCA715 is a 60V single-pole, normally open (1-Form-A) Solid State Relay. It uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation, and features an ultra-low on-resistance for high-current operation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED. Offering the superior reliability associated with semiconductor devices, the LCA715 can be used to replace mechanical relays. Because it has no moving parts, it can offer faster, bounce-free switching in a more compact surface mount or thru-hole package. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1172007 * EN/IEC 60950: TUV Certificate B 09 07 49410 004 Ordering Information Part # LCA715 LCA715S LCA715STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration AC/DC Configuration 1 + Control - Control Do Not Use 6 2 5 3 4 Switching Characteristics of Normally Open Devices Load Do Not Use Load Form-A IF DC Only Configuration 90% + Control - Control Do Not Use Pb DS-LCA715-R06 1 6 2 5 3 4 10% ILOAD + Load ton toff - Load e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LCA715 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 ESD, Human Body Model Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 800 8 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW kV Vrms C C Derate linearly 6.67 mW / C Electrical Characteristcs @ 25C Parameter Output Characteristics Load Current Continuous, AC/DC Configuration Continuous, DC Configuration Peak On-Resistance 1 AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 1 2 Conditions Symbol Min Typ Max Units Continuous, Free Air IL - - 2.2 4 10 Arms / ADC ADC AP t<10ms ILPK IF=5mA, IL=1A RON 0.12 0.038 - 0.15 0.05 1 ILEAK - IF=0mA, VL=60VP A IF=5mA, VL=10V ton toff - 0.7 0.115 2.5 0.25 ms ms COUT - 110 60 200 - pF IL=1A IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.9 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=0mA, f=1MHz VL=10V VL=50V Measurement taken within 1 second of on-time. www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION LCA715 PERFORMANCE DATA @25C (Unless Otherwise Noted)* 30 Typical LED Forward Voltage Drop (N=50, IF=5mA) Typical Turn-Off Time Distribution (N=50, IF=5mA, IL=100mA) Typical Turn-On Time Distribution (N=50, IF=5mA, IL=100mA) 20 25 20 15 10 Device Count (N) Device Count (N) Device Count (N) 25 15 10 5 5 0 30 20 15 10 5 Typical On-Resistance Distribution (N=50, IF=5mA, IL=1A) Typical Blocking Voltage Distribution (N=50) 0.7 0.8 0.9 1.0 LED Current (mA) 15 10 0.110 1.3 1.2 0 20 40 60 Temperature (C) 80 1.6 1.2 0.8 0.4 100 0.8 81 1.0 0.9 0.8 10 20 30 40 LED Forward Current (mA) 0 20 40 60 Temperature (C) 80 100 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 0.100 0 Turn-On Time vs. Temperature (IL=100mA) 0.15 0.6 0.5 0.4 0.2 -40 -20 0 20 40 60 Temperature (C) 10 20 30 40 LED Forward Current (mA) 50 Turn-Off Time vs. Temperature (IL=100mA) 0.14 0.7 0.3 -20 87 0.105 50 0.13 0.12 IF=5mA 0.11 0.10 IF=10mA 0.09 IF=10mA 0.7 -40 83 84 85 86 Blocking Voltage (VP) 0.110 Turn-Off Time (ms) Turn-On Time (ms) LED Current (mA) 1.1 82 0.115 IF=5mA 1.2 5 0.095 0 LED Current to Operate vs. Temperature (IL=1A) 10 0.120 0.0 -20 15 0.115 Turn-Off Time (ms) 1.4 Turn-On Time (ms) LED Forward Voltage (V) 1.5 0.111 0.112 0.113 0.114 On-Resistance (:) Typical Turn-On Time vs. LED Forward Current (IL=100mA) 2.0 IF=50mA IF=20mA IF=10mA IF=5mA 20 0 0 1.1 1.6 1.3 25 20 Typical LED Forward Voltage vs. Temperature 1.1 -40 0.65 0.70 0.75 0.80 Turn-On Time (ms) 5 0 5 0.109 0.111 0.113 0.115 0.117 0.119 0.121 Turn-Off Time (ms) 0.60 25 Device Count (N) Device Count (N) 25 10 0.85 0.55 Device Count (N) 30 15 0 0 1.235 1.240 1.245 1.250 1.255 1.260 1.265 LED Forward Voltage (V) Typical IF for Switch Operation (N=50, IL=100mA) 20 80 100 0.08 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R06 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LCA715 PERFORMANCE DATA @25C (Unless Otherwise Noted)* 4.0 0.15 3.5 0.14 3.0 Load Current (A) On-Resistance (:) 0.16 0.13 0.12 0.11 Typical Load Current vs. Load Voltage DC-Only Configuration (IF=5mA) 2.5 2.0 1.5 1.0 0.0 0.00 20 40 60 Temperature (C) 80 100 Maximum Load Current vs. Temperature (IF=5mA) 4.5 1 0 -1 -2 0.5 0.09 -40 0 Typical Load Current vs. Load Voltage AC/DC Configuration (IF=5mA) 2 0.10 -20 3 Load Current (A) On-Resistance vs. Temperature (IF=5mA, IL=1A) 0.02 0.04 0.06 0.08 0.10 Load Voltage (V) 0.12 -3 -0.3 0.14 Blocking Voltage vs. Temperature 88 0.020 -0.2 -0.1 0.0 0.1 Load Voltage (V) 0.2 0.3 Typical Leakage vs. Temperature (VL=60V) DC-Only Configuration 3.5 3.0 2.5 2.0 AC/DC Configuration 1.5 1.0 -20 0 20 40 60 Temperature (C) Output Capacitance (pF) 240 80 100 84 82 80 78 -40 -20 0 20 40 60 Temperature (C) Output Capacitance vs. Load Voltage ( IF=0mA, f=1MHz) 80 100 0.015 0.010 0.005 0.000 -40 -20 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve 11 10 200 Load Current (A) -40 86 Leakag Current (PA) Blocking Voltage (VP) Load Current (A) 4.0 160 120 80 9 8 7 6 5 4 3 40 0 10 20 30 40 Load Voltage (V) 50 60 2 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION LCA715 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LCA715 / LCA715S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LCA715 / LCA715S 250C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R06 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LCA715 MECHANICAL DIMENSIONS LCA715 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) Pin 1 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) LCA715S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) Pin 1 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION LCA715 LCA715STR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LCA715-R06 (c)Copyright 2012, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: LCA715S LCA715STR LCA715