GBPC25005/W - GBPC2510/W 25A GLASS PASSIVATED BRIDGE RECTIFIER Features GBPC Glass Passivated Die Construction Diffused Junction Low Reverse Leakage Current Low Power Loss, High Efficiency Surge Overload Rating to 300A Peak Electrically Isolated Metal Base for Maximum Heat Dissipation Case to Terminal Isolation Voltage 1500V UL Listed Under Recognized Component Index, File Number E94661 * * * * * * * * H B GBPC / GBPC-W E A C (AC) (+) J C * * * * * * Min Max A 28.30 28.80 B 7.40 8.25 C 16.10 17.10 E 18.80 21.30 G 13.80 14.80 Hole for #10 screw H G GBPC-W Case: Molded Plastic with Heatsink Internally Mounted in the Bridge Encapsulation Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Case Mounting: Through Hole for #10 Screw Mounting Torque: 8.0 Inch-pounds Maximum GBPC Weight: 20 grams (approx.) GBPC-W Weight: 14 grams (approx.) Mounting Position: Any * A (AC) (-) Mechanical Data * H Dim H B M L 5.08AE 5.59AE J 17.60 18.60 K 10.90 11.90 1.07AE L 0.97AE M 31.80 3/4 P 17.60 18.60 All Dimensions in mm A H P (AC) (+) P K (-) Maximum Ratings and Electrical Characteristics A "W" Suffix Designates Wire Leads No Suffix Designates Faston Terminals (AC) @ TA = 25C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. GBPC25 GBPC25 GBPC25 GBPC25 GBPC25 GBPC25 Unit Symbol GBPC25 005/W 01/W 02/W 04/W 06/W 08/W 10/W Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage I2t 50 100 200 400 600 800 1000 VR(RMS) 35 70 140 280 420 560 700 V V IO 25 A IFSM 300 A VFM 1.1 V @ TC = 25C @ TC = 125C IR 5.0 500 mA (Note 1) I2t 374 A2s Average Rectified Output Current @ TC = 60C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (per element) @ IF = 12.5A Peak Reverse Current at Rated DC Blocking Voltage VRRM VRWM VR Rating for Fusing Typical Junction Capacitance (Note 2) Cj 300 pF Typical Thermal Resistance per leg (Note 3) RqJC 1.3 C/W Tj, TSTG -65 to +150 C Operating and Storage Temperature Range Notes: 1. Non-repetitive, for t > 1.0ms and t < 8.3ms. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal resistance junction to case mounted on heatsink. DS21209 Rev. G-2 1 of 2 GBPC25005/W - GBPC2510/W IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FORWARD CURRENT (A) 40 Mounted on a 220 x 220 x 50 mm AL plate heatsink 30 20 10 Resistive or Inductive load 0 0 25 50 75 100 125 150 100 10 1.0 0.1 Tj = 25C 0.01 0.2 0.4 0.6 1000 Single Half-Sine Wave (JEDEC Method) 300 Cj, CAPACITANCE (pF) IFSM, PEAK FWD. SURGE CURRENT (A) 0 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TC, CASE TEMPERATURE (C) Fig. 1 Forward. Current Derating Curve 400 Pulse Width = 300s 200 100 f = 1 Mhz Tj = 25C 100 Tj = 150C 0 1 10 10 100 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (per element) IR, INSTANTANEOUS REVERSE CURRENT (A) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 100 10 Tj = 125C Tj = 130C 1.0 Tj = 25C 0.1 50V - 400V 600V - 1000V 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) DS21209 Rev. G-2 2 of 2 GBPC25005/W - GBPC2510/W