TAP105K010SCS - AVX Corporation

Dipped Radial Capacitors

Introduction

SOLID TANTALUM RESIN DIPPED

SERIES TAP

The TAP resin dipped series of miniature tantalum capacitors

is available for individual needs in both commercial and

professional applications. From computers to automotive to

industrial, AVX has a dipped radial for almost any application.

Terminal Wire

Tantalum wire

Resin encapsulation

Tantalum Graphite

Silver

Solder

Manganese

dioxide

Tantalum

pentoxide

Figure 1 Figure 2 Figure 3

Wire Form C Wire Form B Wire Form S

d2 (0.079)

min

H1 + 4 (0.16)

max

d2 (0.079)

min

2.0(0.08)

max

Figure 4 Figure 5 Figure 6

Wire Form F Wire Form D Wire Form G

H + 3.8 (0.15)

max

1.10 +0.25

-0.10

(0.4 +0.010

-0.004 )

0.079 (2)

min

H1 max

+0.118

(3.0)

Non-Preferred Wire Forms

(Not recommended for new designs)

DIMENSIONS

millimeters (inches)

Preferred Wire Forms

Packaging

Wire Form Figure Case Size L (see note 1) S d Suffixes Available*

CCS Bulk

16±4 5.0±1.0 0.5±0.05 CRW Tape/Reel

C Figure 1 A - R* (0.630±0.160) (0.200±0.040) (0.020±0.002) CRS Tape/Ammo

B Figure 2 A - J* 16±4 5.0±1.0 0.5±0.05 BRW Tape/Reel

(0.630±0.160) (0.200±0.040) (0.020±0.002) BRS Tape/Ammo

SCS Bulk

16±4 2.5±0.5 0.5±0.05 SRW Tape/Reel

S Figure 3 A - J* (0.630±0.160) (0.100±0.020) (0.020±0.002) SRS Tape/Ammo

Non-Preferred Wire Forms

(Not recommended for new designs)

3.9±0.75 5.0±0.5 0.5±0.05

F Figure 4 A - R (0.155±0.030) (0.200±0.020) (0.020±0.002) FCS Bulk

DCS Bulk

D Figure 5 A - H* 16±4 2.5±0.75 0.5±0.05 DTW Tape/Reel

(0.630±0.160) (0.100±0.020) (0.020±0.002) DTS Tape/Ammo

16±4 3.18±0.5 0.5±0.05

G Figure 6 A - J (0.630±0.160) (0.125±0.020) (0.020±0.002) GSB Bulk

Similar to 16±4 6.35±1.0 0.5±0.05

HFigure 1 A - R (0.630±0.160) (0.250±0.040) (0.020±0.002) HSB Bulk

Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information.

(2) For D, H, and H1 dimensions, refer to individual product on following pages.

*For case size availability in tape and reel, please refer to page 7-8.

Dipped Radial Capacitors

Wire Form Outline

SOLID TANTALUM RESIN DIPPED TAP

Preferred Wire Forms

Dipped Radial Capacitors

TAP Series

SOLID TANTALUM RESIN DIPPED

CAPACITORS

TAP is a professional grade device manufactured with a

flame retardant coating and featuring low leakage current

and impedance, very small physical sizes and exceptional

temperature stability. It is designed and conditioned to

operate to +125°C (see page 27 for voltage derating

above 85°C) and is available loose or taped and reeled for

auto insertion. The 15 case sizes with wide capacitance and

working voltage ranges means the TAP can accommodate

almost any application.

Maximum Case Dimensions: millimeters (inches)

Wire C, F, G, H B, S, D

Case H *H1D

A 8.5 (0.33) 7.0 (0.28) 4.5 (0.18)

B 9.0 (0.35) 7.5 (0.30) 4.5 (0.18)

C 10.0 (0.39) 8.5 (0.33) 5.0 (0.20)

D 10.5 (0.41) 9.0 (0.35) 5.0 (0.20)

E 10.5 (0.41) 9.0 (0.35) 5.5 (0.22)

F 11.5 (0.45) 10.0 (0.39) 6.0 (0.24)

G 11.5 (0.45) 10.0 (0.39) 6.5 (0.26)

H 12.0 (0.47) 10.5 (0.41) 7.0 (0.28)

J 13.0 (0.51) 11.5 (0.45) 8.0 (0.31)

K 14.0 (0.55) 12.5 (0.49) 8.5 (0.33)

L 14.0 (0.55) 12.5 (0.49) 9.0 (0.35)

M 14.5 (0.57) 13.0 (0.51) 9.0 (0.35)

N 16.0 (0.63) 9.0 (0.35)

P 17.0 (0.67) 10.0 (0.39)

R 18.5 (0.73) 10.0 (0.39)

TAP

Type

475

Capacitance Code

pF code: 1st two digits

represent significant figures,

3rd digit represents multiplier

(number of zeros to follow)

Capacitance Tolerance

K = ±10%

M = ±20%

(For J = ±5% tolerance,

please consult factory)

035

Rated DC Voltage

SCS

Suffix indicating wire form

and packaging

(see page 3)

HOW TO ORDER

Technical Data: All technical data relate to an ambient temperature of +25°C

Capacitance Range: 0.1µF to 330µF

Capacitance Tolerance: ±20%; ±10% (±5% consult your AVX representative for details)

Rated Voltage DC (VR)+85°C: 6.3 10 16 20 25 35 50

Category Voltage (VC)+125°C: 4 6.3 10 13 16 23 33

Surge Voltage (VS)+85°C: 8 13 20 26 33 46 65

+125°C: 5 9 12 16 21 28 40

Temperature Range: -55°C to +125°C

Environmental Classification: 55/125/56 (IEC 68-2)

Dissipation Factor: 0.04 for CR 0.1-1.5µF

0.06 for CR 2.2-6.8µF

0.08 for CR 10-68µF

0.10 for CR 100-330µF

Reliability: 1% per 1000 hrs. at 85°C with 0.1Ω/V series impedance, 60% confidence level.

Capacitance Range (letter denotes case code)

Capacitance Rated voltage DC (VR)

µF Code 6.3V 10V 16V 20V 25V 35V 50V

0.1 104 AA

0.15 154 AA

0.22 224 AA

0.33 334 AA

0.47 474 AA

0.68 684 AB

1.0 105 A A A C

1.5 155 A A A A D

2.2 225 A A A A B E

3.3 335 A A A B B C F

4.7 475 A A B C C E G

6.8 685 A B C D D F H

10 106 B C D E E F J

15 156 C D E F F H K

22 226 D E F H H K L

33 336 E F F J J M

47 476 F G J K M N

68 686 G H L N N

100 107 H K N N

150 157 K N N

220 227 M P R

330 337 P R

Values outside this standard range may be available on request.

AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered.

MARKING

Polarity, capacitance, rated DC voltage, and an "A" (AVX

logo) are laser marked on the capacitor body which is made

of flame retardant gold epoxy resin with a limiting oxygen

index in excess of 30 (ASTM-D-2863).

• Polarity

• Capacitance

• Voltage

• AVX logo

• Tolerance code:

±20% = Standard (no marking)

±10% = “K” on reverse side of unit

±5% = “J” on reverse side of unit

10µ

Dipped Radial Capacitors

TAP Series

TECHNICAL SPECIFICATIONS

Dipped Radial Capacitors

TAP Series

AVX Case Capacitance DCL DF ESR

Part No. Size µF (µA) % max. (Ω)

Max. Max. @ 100 kHz

20 volt @ 85°C (13 volt @ 125°C) continued

TAP 336(*)020 J 33 5.2 8 1.4

TAP 476(*)020 K 47 7.5 8 1.2

TAP 686(*)020 N 68 10.8 8 0.9

TAP 107(*)020 N 100 16.0 10 0.6

25 volt @ 85°C (16 volt @ 125°C)

TAP 105(*)025 A 1.0 0.5 4 10.0

TAP 155(*)025 A 1.5 0.5 4 8.0

TAP 225(*)025 A 2.2 0.5 6 6.0

TAP 335(*)025 B 3.3 0.6 6 5.0

TAP 475(*)025 C 4.7 0.9 6 4.0

TAP 685(*)025 D 6.8 1.3 6 3.1

TAP 106(*)025 E 10 2.0 8 2.5

TAP 156(*)025 F 15 3.0 8 2.0

TAP 226(*)025 H 22 4.4 8 1.5

TAP 336(*)025 J 33 6.6 8 1.2

TAP 476(*)025 M 47 9.4 8 1.0

TAP 686(*)025 N 68 13.6 8 0.8

35 volt @ 85°C (23 volt @ 125°C)

TAP 104(*)035 A 0.1 0.5 4 26.0

TAP 154(*)035 A 0.15 0.5 4 21.0

TAP 224(*)035 A 0.22 0.5 4 17.0

TAP 334(*)035 A 0.33 0.5 4 15.0

TAP 474(*)035 A 0.47 0.5 4 13.0

TAP 684(*)035 A 0.68 0.5 4 10.0

TAP 105(*)035 A 1.0 0.5 4 8.0

TAP 155(*)035 A 1.5 0.5 4 6.0

TAP 225(*)035 B 2.2 0.6 6 5.0

TAP 335(*)035 C 3.3 0.9 6 4.0

TAP 475(*)035 E 4.7 1.3 6 3.0

TAP 685(*)035 F 6.8 1.9 6 2.5

TAP 106(*)035 F 10 2.8 8 2.0

TAP 156(*)035 H 15 4.2 8 1.6

TAP 226(*)035 K 22 6.1 8 1.3

TAP 336(*)035 M 33 9.2 8 1.0

TAP 476(*)035 N 47 10.0 8 0.8

50 volt @ 85°C (33 volt @ 125°C)

TAP 104(*)050 A 0.1 0.5 4 26.0

TAP 154(*)050 A 0.15 0.5 4 21.0

TAP 224(*)050 A 0.22 0.5 4 17.0

TAP 334(*)050 A 0.33 0.5 4 15.0

TAP 474(*)050 A 0.47 0.5 4 13.0

TAP 684(*)050 B 0.68 0.5 4 10.0

TAP 105(*)050 C 1.0 0.5 4 8.0

TAP 155(*)050 D 1.5 0.6 4 6.0

TAP 225(*)050 E 2.2 0.8 6 3.5

TAP 335(*)050 F 3.3 1.3 6 3.0

TAP 475(*)050 G 4.7 1.8 6 2.5

TAP 685(*)050 H 6.8 2.7 6 2.0

TAP 106(*)050 J 10 4.0 8 1.6

TAP 156(*)050 K 15 6.0 8 1.2

TAP 226(*)050 L 22 8.8 8 1.0

AVX Case Capacitance DCL DF ESR

Part No. Size µF (µA) % max. (Ω)

Max. Max. @ 100 kHz

6.3 volt @ 85°C (4 volt @ 125°C)

TAP 335(*)006 A 3.3 0.5 6 13.0

TAP 475(*)006 A 4.7 0.5 6 10.0

TAP 685(*)006 A 6.8 0.5 6 8.0

TAP 106(*)006 B 10 0.5 8 6.0

TAP 156(*)006 C 15 0.8 8 5.0

TAP 226(*)006 D 22 1.1 8 3.7

TAP 336(*)006 E 33 1.7 8 3.0

TAP 476(*)006 F 47 2.4 8 2.0

TAP 686(*)006 G 68 3.4 8 1.8

TAP 107(*)006 H 100 5.0 10 1.6

TAP 157(*)006 K 150 7.6 10 0.9

TAP 227(*)006 M 220 11.0 10 0.9

TAP 337(*)006 P 330 16.6 10 0.7

10 volt @ 85°C (6.3 volt @ 125°C)

TAP 225(*)010 A 2.2 0.5 6 13.0

TAP 335(*)010 A 3.3 0.5 6 10.0

TAP 475(*)010 A 4.7 0.5 6 8.0

TAP 685(*)010 B 6.8 0.5 6 6.0

TAP 106(*)010 C 10 0.8 8 5.0

TAP 156(*)010 D 15 1.2 8 3.7

TAP 226(*)010 E 22 1.7 8 2.7

TAP 336(*)010 F 33 2.6 8 2.1

TAP 476(*)010 G 47 3.7 8 1.7

TAP 686(*)010 H 68 5.4 8 1.3

TAP 107(*)010 K 100 8.0 10 1.0

TAP 157(*)010 N 150 12.0 10 0.8

TAP 227(*)010 P 220 17.6 10 0.6

TAP 337(*)010 R 330 20.0 10 0.5

16 volt @ 85°C (10 volt @ 125°C)

TAP 155(*)016 A 1.5 0.5 4 10.0

TAP 225(*)016 A 2.2 0.5 6 8.0

TAP 335(*)016 A 3.3 0.5 6 6.0

TAP 475(*)016 B 4.7 0.6 6 5.0

TAP 685(*)016 C 6.8 0.8 6 4.0

TAP 106(*)016 D 10 1.2 8 3.2

TAP 156(*)016 E 15 1.9 8 2.5

TAP 226(*)016 F 22 2.8 8 2.0

TAP 336(*)016 F 33 4.2 8 1.6

TAP 476(*)016 J 47 6.0 8 1.3

TAP 686(*)016 L 68 8.7 8 1.0

TAP 107(*)016 N 100 12.8 10 0.8

TAP 157(*)016 N 150 19.2 10 0.6

TAP 227(*)016 R 220 20.0 10 0.5

20 volt @ 85°C (13 volt @ 125°C)

TAP 105(*)020 A 1.0 0.5 4 10.0

TAP 155(*)020 A 1.5 0.5 4 9.0

TAP 225(*)020 A 2.2 0.5 6 7.0

TAP 335(*)020 B 3.3 0.5 6 5.5

TAP 475(*)020 C 4.7 0.7 6 4.5

TAP 685(*)020 D 6.8 1.0 6 3.6

TAP 106(*)020 E 10 1.6 8 2.9

TAP 156(*)020 F 15 2.4 8 2.3

TAP 226(*)020 H 22 3.5 8 1.8

(*) Insert capacitance tolerance code; M for ±20%, K for ±10% and J for ±5%

NOTE: Voltage ratings are minimum values. AVX reserves the right to supply higher

voltage ratings in the same case size.

RATINGS AND PART NUMBER REFERENCE