Surface Mount MSW-2-20+ MSW-2-20 Switch 50W SPDT, Reflective Maximum Ratings Operating Temperature Features -40C to 85C Storage Temperature DC to 2.0 GHz -55C to 100C Input Power see Note 1 Control Current see Note 2 Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN RF OUT 1 RF OUT 2 CONTROL 1 CONTROL 2 GROUND 1 6 3 5 4 2,7,8 * * * * wideband, DC to 2.0 GHz very fast switching, 4ns typ. low insertion loss, 0.5 dB typ. low video leakage, 15 mVp-p typ. + RoHS compliant in accordance with EU Directive (2002/95/EC) Applications * * * * cellular PCN 2-way radio receiver antenna switching The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications. Electrical Specifications FREQ. (GHz) INSERTION LOSS (dB) DC-100 MHz fL DC Outline Drawing CASE STYLE: XX211-1 PRICE: $2.45 ea. QTY (10) fU 2.0 100-500 MHz 1000-2000 MHz IN-OUT ISOLATION (dB) DC-100 MHz 100-500 MHz Typ. Max. Typ. Max. Typ. Max. Typ. Max. Typ. Typ. Typ. Typ Typ. Min. Typ. Min. Typ. Min. Typ. Min 0.30 0.6 22 23 24 25 55 50 43 0.4 500-1000 MHz 1dB COMPR. (dBm) 0.7 0.50 1.0 0.75 1.3 500-1000 1000-2000 MHz MHz DC-100 MHz 100-500 MHz 36 500-1000 MHz 34 28 1000-2000 MHz 24 20 PCB Land Pattern Additional Specifications -8/0 for compression spec, -8 to -5/0 for all other specs Control Voltage Control Current, mA Suggested Layout, Tolerance to be within .002 Outline Dimensions (inch mm ) A .163 4.14 B .210 5.33 C .077 1.96 D .250 6.35 E .220 5.59 F .050 1.27 H .009 0.23 J .025 0.64 K .030 0.76 M .050 1.27 N .030 0.76 P wt .270 grams 6.86 0.10 Demo Board MCL P/N: TB-203 Suggested PCB Layout (PL-108) G .017 0.43 VSWR(:1) 0.2 max to -8V, 0.02 max at 0 to -0.2V DC-1GHz 1.2 typ. 1-2GHz 1.4 typ. Rise/Fall time (10%-90%), ns Switching time, 50% of Control to 90% RF(Turn-on), ns 10% RF(Turn-off), ns **Video Leakage, mVp-p 0/-5V Control CONTROL LOGIC Control Ports RF outputs 1 2 1 2 0 -V Off On -V 0 On Off 2 typ. 4 typ 4 typ 15 typ. ** Video leakage or break through is defined as leakage of switching signal to RF output ports. 1. RF Power Input(dBm), Max.DC-100MHz100-500MHz 500-2000MHz * Steady State Control 0/-8V 23 27 31 * As a Modulator 11 17 21 2. Control Current, 500A (occurs at -9V to -12V typ) 3. OFF state of RF output is low impedance 4. All RF pins must be DC blocked or held at 0V DC. Electrical Schematic Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. REV. B M102713 MSW-2-20 WP/CP 070305 Page 1 of 2 MSW-2-20+ MSW-2-20 Typical Performance Data FREQ. (MHz) ON 1.00 15.99 23.49 53.48 98.46 210.93 413.36 518.32 728.25 825.72 998.16 1140.62 1343.05 1552.98 1657.94 1755.41 1860.38 1897.86 1965.34 2002.83 INSERTION LOSS (dB) Control @ 0V/-5V) IN-OUT OFF ISOLATION (dB) Control @ 0V/-5V) IN-OUT VSWR IN OUT -- x -- x -- x ON -- x 0.25 0.25 0.26 0.27 0.31 0.35 0.40 0.40 0.45 0.51 0.48 0.52 0.53 0.59 0.61 0.64 0.68 0.69 0.75 0.76 0.00 0.01 0.01 0.00 0.01 0.01 0.02 0.02 0.02 0.03 0.02 0.03 0.02 0.01 0.01 0.02 0.02 0.02 0.03 0.02 80.61 72.05 67.53 61.77 54.45 46.92 41.26 38.51 35.06 33.99 31.58 29.73 27.93 26.40 25.46 24.84 24.05 23.79 23.68 23.33 2.40 0.66 1.14 0.91 0.63 0.43 0.42 0.24 0.35 0.36 0.44 0.45 0.39 0.31 0.34 0.31 0.31 0.27 0.29 0.28 1.05 1.05 1.05 1.05 1.04 1.04 1.06 1.06 1.07 1.07 1.08 1.08 1.10 1.16 1.20 1.25 1.30 1.33 1.36 1.38 1.05 1.05 1.05 1.04 1.04 1.05 1.06 1.06 1.07 1.07 1.08 1.08 1.11 1.17 1.20 1.24 1.29 1.31 1.34 1.36 MSW-2-20 INSERTION LOSS at RF level of 10 dBm 100 1.6 ISOLATION (dB) INSERTION LOSS (dB) 2.0 MSW-2-20 ISOLATION 1.2 0.8 0.4 at RF level of 10 dBm 80 60 40 20 0 0.0 0 401 802 1203 FREQUENCY (MHz) 1604 2005 1604 2005 0 401 802 1203 FREQUENCY (MHz) 1604 2005 MSW-2-20 VSWR 1.5 at RF level of 10 dBm INPUT OUTPUT VSWR 1.4 1.3 1.2 1.1 1.0 0 401 802 1203 FREQUENCY (MHz) Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 2 of 2