1
File Number 2091.4
1-888-INTERSIL or 321-724-7143 |Copyright © Intersil Corporation 2000
MUR840, MUR860, RURP840, RURP860
8A, 400V - 600V Ultrafast Diodes
The MUR840, MUR860, RURP840 and RURP860 are low
forward voltage drop ultrafast recovery rectifiers
(trr < 60ns). They use a glass-passivated ion-implanted,
epitaxial construction.
These devices are intended for use as output rectifiers and
flywheel diodes in a variety of high-frequency pulse-width
modulated switching regulators. Their low stored charge and
attendant fast reverse-recovery behavior minimize electrical
noise generation and in many circuits markedly reduce the
turn-on dissipation of the associated power switching
transistors.
Formerly developmental type TA09616.
Symbol
Features
• Ultrafast with Soft Recovery. . . . . . . . . . . . . . . . . . .<60ns
• Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175oC
• Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600V
• Avalanche Energy Rated
• Planar Construction
Applications
• Switching Power Supplies
• Power Switching Circuits
• General Purpose
Packaging JEDEC TO-220AC
Ordering Information
PART NUMBER PACKAGE BRAND
MUR840 TO-220AC MUR840
RURP840 TO-220AC RURP840
MUR860 TO-220AC MUR860
RURP860 TO-220AC RURP860
NOTE: When ordering, use the entire part number.
K
A
CATHODE
(FLANGE)
CATHODE
ANODE
Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified MUR840
RURP840 MUR860
RURP860 UNITS
Peak Repetitive Reverse Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRRM 400 600 V
Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM 400 600 V
DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR400 600 V
Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IF(AV)
(TC = 155oC) 88A
Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFRM
(Square Wave, 20kHz) 16 16 A
Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM
(Halfwave, 1 Phase, 60Hz) 100 100 A
Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD75 75 W
Avalanche Energy (See Figures 10 and 11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAVL 20 20 mJ
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSTG, TJ-65 to 175 -65 to 175 oC
Maximum Lead Temperature for Soldering
Leads at 0.063 in. (1.6mm) from case for 10s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL300 300 oC
Package Body for 10s, see Tech Brief 334. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TPKG 260 260 oC
Data Sheet January 2000
2
Electrical Specifications TC = 25oC, Unless Otherwise Specified
SYMBOL TEST CONDITION
MUR840, RURP840 MUR860, RURP860
UNITSMIN TYP MAX MIN TYP MAX
VFIF = 8A - - 1.3 - - 1.5 V
IF = 8A, TC = 150oC - - 1.0 - - 1.2 V
IRVR = 400V - - 100 - - - µA
VR = 600V -----100µA
VR = 400V, TC = 150oC - - 500 - - - µA
VR = 600V, TC = 150oC -----500µA
trr IF = 1A, dIF/dt = 200A/µs - -60- -60ns
IF = 8A, dIF/dt = 200A/µs - -70- -70ns
taIF = 8A, dIF/dt = 200A/µs - 32 - - 32 - ns
tbIF = 8A, dIF/dt = 200A/µs - 21 - - 21 - ns
QRR IF = 8A, dIF/dt = 200A/µs - 195 - - 195 - nC
CJVR = 10V, IF = 0A - 25 - - 25 - pF
RθJC --2--2
oC/W
DEFINITIONS
VF = Instantaneous forward voltage (pw = 300µs, D = 2%).
IR = Instantaneous reverse current.
trr = Reverse recovery time (See Figure 9), summation of ta + tb.
ta = Time to reach peak reverse current (See Figure 9).
tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 9).
QRR = Reverse recovery charge.
CJ = Junction Capacitance.
RθJC = Thermal resistance junction to case.
pw = pulse width.
D = duty cycle.
Typical Performance Curves
FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE
VF, FORWARD VOLTAGE (V)
IF, FORWARD CURRENT (A)
1
40
0.5
10
0
0.5 11.5 22.5
175oC
25oC
100oC
VR, REVERSE VOLTAGE (V)
0 200 400 600300 500
500
0.01
0.1
1
10
100
100 175oC
100oC
25oC
IR, REVERSE CURRENT (µA)
MUR840, MUR860, RURP840, RURP860
3
FIGURE 3. trr, ta AND tb CURVES vs FORWARD CURRENT FIGURE 4. trr, ta AND tb CURVES vs FORWARD CURRENT
FIGURE 5. trr, ta AND tb CURVES vs FORWARD CURRENT FIGURE 6. CURRENT DERATING CURVE
FIGURE 7. JUNCTION CAPACITANCE vs REVERSE VOLTAGE
Typical Performance Curves (Continued)
trr
IF, FORWARD CURRENT (A)
1
0
40
60
50
0.5 8
30
10
t, RECOVERY TIMES (ns)
ta
tb
20
4
TC = 25oC, dIF/dt = 200A/µs
20
40
60
tb
0.5
0814
80
ta
trr
100
IF, FORWARD CURRENT (A)
t, RECOVERY TIMES (ns)
TC = 100oC, dIF/dt = 200A/µs
25
50
75
tb
0.5
0814
100
ta
trr
125
IF, FORWARD CURRENT (A)
t, RECOVERY TIMES (ns)
TC = 175oC, dIF/dt = 200A/µs
2
0
140 145 155 175165
4
6
8
TC, CASE TEMPERATURE (oC)
IF(AV), AVERAGE FORWARD CURRENT (A)
150
DC
SQ. WAVE
160 170
VR, REVERSE VOLTAGE (V)
40
20
0
80
0 50 100 150 200
CJ, JUNCTION CAPACITANCE (pF)
100
60
MUR840, MUR860, RURP840, RURP860
4
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
Test Circuits and Waveforms
FIGURE 8. trr TEST CIRCUIT FIGURE 9. trr WAVEFORMS AND DEFINITIONS
FIGURE 10. AVALANCHE ENERGY TEST CIRCUIT FIGURE 11. AVALANCHE CURRENT AND VOLTAGE
WAVEFORMS
RG
L
VDD
IGBT
CURRENT
SENSE
DUT
VGE t1
t2
VGE AMPLITUDE AND
t1 AND t2CONTROL IF
RG CONTROL dIF/dt
+
-
dt
dIF
IFtrr
tatb
0
IRM
0.25 IRM
DUT
CURRENT
SENSE +
LR
VDD
R < 0.1Ω
EAVL = 1/2LI2 [VR(AVL)/(VR(AVL) - VDD)]
Q1= IGBT (BVCES > DUT VR(AVL))
-
VDD
Q1
I = 1A
L = 40mH
IV
t0t1t2
IL
VAVL
t
IL
MUR840, MUR860, RURP840, RURP860
