US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
Chip Inductors - 0402HP Series (1005)
Document 526 -1
Document 526-1 Revised 08/08/13
• Higher Q and lower DCR than other 0402 inductors
• Very high SRF values – as high as 16 GHz
• Excellent current handling capability – up to 2300 mA
• 52 inductance values from 1.0 to 220 nH
Core material Ceramic
Environmental RoHS compliant, halogen free optional
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 0.7 – 1.0 mg
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 or 5000 per 7″ reel. Paper tape: 8 mm wide,
0.66 mm thick, 2 mm pocket spacing
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
0
60
50
40
30
20
10
70
80
Inductance (nH)
110 100 1000
10000
Frequency (MHz)
51 nH
39 nH
27 nH
11 nH
2.0 nH
68 nH
Typical L vs Frequency
0
60
50
40
30
20
10
70
80
90
100
110
120
Q Factor
110 100 1000
10000
Frequency (MHz)
68 nH
51 nH
39 nH
27 nH
11 nH
2.0 nH
Typical Q vs Frequency
Current Derating
-40 -20 020406080100 140120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
A
B
overall
C
D
J
F
F
G
H
Recommende
d
Land Pattern
E
terminal
Terminal wraparound:
approx 0.007/0,18 both ends
I
I
Pick and
place
material
D E F G H
I
J
0.010 0.020 0.008 0.024 0.026 0.014 0.020 inches
0,25 0,51 0,20 0,61 0,66 0,36 0,51 mm
A max B (min – max) C max
0.043 0.020 – 0.028 0.024 inches
1,09 0,51 – 0,71 0,61 mm
0402HP
A max B C max
0.044 0.026 ±0.002 0.026 inches
1,12 0,66 ±0,051 0,66 mm
0402HPH
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
0402HP Series (1005)
Document 526-2
Document 526-2 Revised 08/08/13
Inductance2 Percent Test freq 900 MHz 1.7 GHz SRF typ5 DCR max6 Irms7
Part number1 (nH)
tolerance3 (MHz) L typ Q typ4 L typ Q typ4 (GHz) (Ohms) (mA)
0402HP-1N0XJL_ 1.0 5 250 0.97 46 0.99 72 16.0 0.030 2300
0402HP-2N0XJL_ 2.0 5 250 1.96 58 1.98 85 15.2 0.038 2100
0402HP-2N2XJL_ 2.2 5 250 2.17 60 2.17 86 15.1 0.038 2100
0402HP-2N4X_L_ 2.4 5,3,2 250 2.37 60 2.38 83 14.0 0.042 2000
0402HP-2N7X_L_ 2.7 5,3,2 250 2.66 62 2.68 85 13.0 0.085 1500
0402HP-3N3X_L_ 3.3 5,3,2 250 3.26 66 3.28 95 12.8 0.045 1700
0402HP-3N6X_L_ 3.6 5,3,2 250 3.56 65 3.58 94 11.7 0.045 1700
0402HP-3N9X_L_ 3.9 5,3,2 250 3.87 64 3.91 98 9.50 0.045 1700
0402HP-4N3X_L_ 4.3 5,3,2 250 4.26 63 4.33 90 7.15 0.050 1600
0402HP-4N7X_L_ 4.7 5,3,2 250 4.67 58 4.74 83 6.85 0.075 1500
0402HP-5N1X_L_ 5.1 5,3,2 250 5.07 54 5.16 76 6.80 0.125 1200
0402HP-5N6X_L_ 5.6 5,3,2 250 5.56 73 5.66 105 6.50 0.055 1600
0402HP-6N2X_L_ 6.2 5,3,2 250 6.18 73 6.25 100 5.80 0.055 1600
0402HP-6N8X_L_ 6.8 5,3,2 250 6.78 68 6.97 94 5.80 0.070 1500
0402HP-7N5X_L_ 7.5 5,3,2 250 7.49 60 7.77 82 5.40 0.100 1400
0402HP-8N2X_L_ 8.2 5,3,2 250 8.10 68 8.40 95 5.40 0.065 1500
0402HP-8N7X_L_ 8.7 5,3,2 250 8.73 66 9.04 95 5.00 0.070 1500
0402HP-9N0X_L_ 9.0 5,3,2 250 8.99 67 9.21 92 5.00 0.080 1400
0402HP-9N5X_L_ 9.5 5,3,2 250 9.52 64 9.97 90 4.70 0.090 1400
0402HP-10NX_L_ 10 5,3,2 250 9.98 62 10.4 90 4.70 0.110 1300
0402HP-11NX_L_ 11 5,3,2 250 11.0 68 11.6 98 4.70 0.065 1400
0402HP-12NX_L_ 12 5,3,2 250 12.0 66 12.6 100 4.40 0.100 1200
0402HP-13NX_L_ 13 5,3,2 250 13.1 62 13.9 82 4.20 0.155 870
0402HP-15NX_L_ 15 5,3,2 250 15.1 62 16.0 85 3.90 0.115 1100
0402HP-16NX_L_ 16 5,3,2 250 16.2 57 17.3 77 3.70 0.150 850
0402HP-18NX_L_ 18 5,3,2 250 18.2 58 19.5 74 3.55 0.120 900
0402HP-19NX_L_ 19 5,3,2 250 19.2 61 20.7 88 3.50 0.145 850
0402HP-20NX_L_ 20 5,3,2 250 20.3 58 22.0 76 3.50 0.185 780
0402HP-21NX_L_ 21 5,3,2 250 21.3 48 23.2 62 1.70 0.460 450
0402HP-22NX_L_ 22 5,3,2 250 22.3 60 24.4 74 3.30 0.160 800
0402HP-23NX_L_ 23 5,3,2 250 23.3 60 25.5 77 3.30 0.160 800
0402HP-24NX_L_ 24 5,3,2 250 24.5 55 27.1 71 3.15 0.210 700
0402HP-25NX_L_ 25 5,3,2 250 25.5 57 28.3 73 3.15 0.260 700
0402HP-26NX_L_ 26 5,3,2 250 26.6 56 29.3 74 3.15 0.290 700
0402HP-27NX_L_ 27 5,3,2 250 27.3 62 29.5 86 3.20 0.350 450
0402HP-30NX_L_ 30 5,3,2 250 30.8 61 35.0 87 2.90 0.350 450
0402HP-33NX_L_ 33 5,3,2 250 34.0 61 38.3 80 2.80 0.330 490
0402HP-36NX_L_ 36 5,3,2 250 37.1 59 42.2 76 2.80 0.390 480
0402HP-37NX_L_ 37 5,3,2 250 38.2 57 44.0 72 2.70 0.480 470
0402HP-39NX_L_ 39 5,3,2 250 40.5 56 47.0 84 2.60 0.430 450
0402HP-40NX_L_ 40 5,3,2 250 41.3 56 47.4 75 2.60 0.430 450
0402HP-43NX_L_ 43 5,3,2 250 45.0 52 54.1 68 2.50 0.520 450
0402HP-47NX_L_ 47 5,3,2 250 49.0 48 58.9 62 2.40 0.580 420
0402HP-51NX_L_ 51 5,3,2 250 49.1 52 58.8 59 2.30 0.700 360
0402HPH-56NX_L_ 56 5,3,2 250 58.8 56 72.2 64 2.07 0.900 330
0402HPH-68NX_L_ 68 5,3,2 250 72.2 56 91.4 64 1.84 1.00 320
0402HPH-82NX_L_ 82 5,3,2 250 89.7 52 – – 1.75 1.10 315
0402HPH-R10X_L_ 100 5,3,2 250 – – – – 1.58 1.20 310
0402HPH-R12X_L_ 120 5,3,2 250 – – – – 1.25 1.20 310
0402HPH-R15X_L_ 150 5,3,2 100 – – – – 1.14 2.0 240
0402HPH-R18X_L_ 180 5,3,2 100 – – – – 1.08 2.1 240
0402HPH-R22X_L_ 220 5,3,2 100 – – – – 0.96 3.1 160
1. When ordering, specify tolerance, termination and packaging codes:
0402HP-82NXJLW
Tolerance: G = 2% H = 3% J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: W = 7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
Q = 7″ machine-ready reel. EIA-481 punched paper
tape (5000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured at test frequency using a Coilcraft SMD-F fixture
in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided cor-
relation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4287A with an Agilent/HP 16197 test
fixture.
5. SRF measured using an Agilent/HP 8722ES network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test
fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kits C403A and B contain 20 each of 5% values
Designer’s Kits C403A-2 and B-2 contain 20 each of 2% values
