(R) CT126/CS126 CotoMOS CT126/CS126 The CT126 and CS126 feature high current switching capability to 2.0A with a low on resistance of 0.5 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 40V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT126/CS126 Features u Contact Form: 1a u Load Voltage: 40V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 2.0A Maximum u On-Resistance: 0.5 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS126 0.358(9.1)Max. 0.051(1.3) CT126 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 12 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT126/CS126 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 40V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 2.0A Peak Load Current IPeak A 3.5A Output Power Dissipation POut mW 450mW PT mW 500mW V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C CT126/CS126 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min Typ Max VF I=10mA V 1.0 1.4 1.5 0.5 3.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V 0.5 1.1 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak IF=0mA, VL=40V A Output Capacitance COut VL=0V, f=1MHz pF 240 ms 0.5 3.0 ms 0.05 1.0 0.085 0.5 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 13 (R) CT130/CS130 CotoMOS CT130/CS130 The CT130 and CS130 feature current switching capability to 120mA with a low on resistance of 30 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 400V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT130/CS130 Features u Contact Form: 1a u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 120mA Maximum u On-Resistance: 30 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS130 0.358(9.1)Max. 0.051(1.3) CT130 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 14 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT130/CS130 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 400V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 120mA Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 450mW PT mW 500mW V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C CT130/CS130 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ 1.5 0.9 0.5 Max 3.0 1.0 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=400V A Output Capacitance COut VL=0V, f=1MHz pF 115 ms 0.2 1.0 ms 0.05 1.0 24 30 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 15 (R) CT131/CS131 CotoMOS CT131/CS131 The CT131 and CS131 feature current switching capability to 130mA with a low on resistance of 24 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 350V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT131/CS131 Features u Contact Form: 1a u Load Voltage: 350V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 130mA Maximum u On-Resistance: 24 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS131 0.358(9.1)Max. 0.051(1.3) CT131 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 16 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT131/CS131 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 350V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 130mA Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 450mW PT mW 500mW V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C CT131/CS131 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ 1.5 0.9 0.5 Max 3.0 1.0 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=350V A Output Capacitance COut VL=0V, f=1MHz pF 115 ms 0.2 1.0 ms 0.05 1.0 17 24 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 17 (R) CT134/CS134 CotoMOS CT134/CS134 The CT134 and CS134 feature current switching capability to 200mA with a low on resistance of 8 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 200V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT134/CS134 Features u Contact Form: 1a u Load Voltage: 200V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 200mA Maximum u On-Resistance: 8 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS134 0.358(9.1)Max. 0.051(1.3) CT134 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 18 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT134/CS134 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 200V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 200mA Peak Load Current IPeak A 0.8A Output Power Dissipation POut mW 450mW PT mW 500mW V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C CT134/CS134 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 6.0 8.0 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=200V A Output Capacitance COut VL=0V, f=1MHz pF 130 ms 0.2 1.0 ms 0.05 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 19 (R) CT135/CS135 CotoMOS CT135/CS135 The CT135 and CS135 combine Coto quality and economy in an industry standard 6 pin DIP package. Both the CT135 and the CS135 offer low output capacitance and low leakage current. The CT135 utilizes a thru hole lead configuration, while the CS135 offers a surface mount option when the application requires it. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. CT135/CS135 Features u Contact Form: 1a u Load Voltage: 80V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 100mA Maximum u On-Resistance: 30 Maximum u Low Off-State Leakage Current: 10nA Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS135 0.358(9.1)Max. 0.051(1.3) CT135 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 20 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT135/CS135 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 80V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 100mA Peak Load Current IPeak A 0.3A Output Power Dissipation POut mW 350mW PT mW 400mW V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C CT135/CS135 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 20 30 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=80V nA Output Capacitance COut VL=0V, f=1MHz pF 6.0 ms 0.02 0.1 ms 0.05 1.0 10 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 21 (R) CT136/CS136 CotoMOS CT136/CS136 The CT136 and CS136 combine Coto quality and economy in an industry standard 6 pin DIP package. Both the CT136 and the CS136 offer low on resistance and high load current. The CT136 utilizes a thru hole lead configuration, while the CS136 offers a surface mount option when the application requires it. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. CT136/CS136 Features u Contact Form: 1a u Load Voltage: 60V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 2.5A Maximum u On-Resistance: 0.14 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS136 0.358(9.1)Max. 0.051(1.3) CT136 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 22 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT136/CS136 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 60V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 2.5A Peak Load Current IPeak A 6.0A Output Power Dissipation POut mW 500mW PT mW 550mW I/O Breakdown Voltage VI/O V Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms CT136/CS136 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 1.5 3.0 0.09 0.14 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=10mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak IF=0mA, VL=50V A Output Capacitance COut VL=0V, f=1MHz pF 470 ms 0.6 5.0 ms 0.04 2.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 5*109 1.0 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 23 (R) CT137/CS137 CotoMOS CT137/CS137 The CT137 and CS137 combine Coto quality and economy in an industry standard 6 pin DIP package. Both the CT137 and the CS137 offer low on resistance. The CT137 utilizes a thru hole lead configuration, while the CS137 offers a surface mount option when the application requires it. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. CT137/CS137 Features u Contact Form: 1a u Load Voltage: 60V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 400mA Maximum u On-Resistance: 1.6 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS137 0.358(9.1)Max. 0.051(1.3) CT137 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 24 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT137/CS137 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 60V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 400mA Peak Load Current IPeak A 2.0A Output Power Dissipation POut mW 450mW PT mW 500mW V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C CT137/CS137 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 0.8 1.6 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=60V A Output Capacitance COut VL=0V, f=1MHz pF 195 ms 0.3 1.0 ms 0.05 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 25 (R) CT138/CS138 CotoMOS CT138/CS138 The CT138 and CS138 feature current switching capability to 80mA with a low on resistance of 60 Maximum Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 600V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT138/CS138 Features u Contact Form: 1a u Load Voltage: 600V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 80mA Maximum u On-Resistance: 60 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS138 0.358(9.1)Max. 0.051(1.3) CT138 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 26 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT138/CS138 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 600V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 80mA Peak Load Current IPeak A 0.2A Output Power Dissipation POut mW 450mW PT mW 500mW V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C CT138/CS1382 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 35.0 60.0 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=600V A Output Capacitance COut VL=0V, f=1MHz pF 95 ms 0.1 1.0 ms 0.05 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 27 (R) CT147/CS147 CotoMOS CT147/CS147 The CT147 and CS147 combine Coto quality and economy in an industry standard 6 pin DIP package. Both the CT147 and the CS147 offer low on resistance and high load current. The CT147 utilizes a thru hole lead configuration, while the CS147 offers a surface mount option when the application requires it. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications CT147/CS147 Features u Contact Form: 1a u Load Voltage: 80V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 2.0A Maximum u On-Resistance: 0.16 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS147 0.358(9.1)Max. 0.051(1.3) CT147 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 28 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT147/CS147 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 80V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 2.0A Peak Load Current IPeak A 5.0A Output Power Dissipation POut mW 500mW PT mW 550mW I/O Breakdown Voltage VI/O V Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms CT138/CS1382 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 1.2 3.0 0.1 0.16 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=80V A Output Capacitance COut VL=0V, f=1MHz pF 500 ms 0.7 5.0 ms 0.04 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 29 (R) C226S/C326S CotoMOS(R) C226S/C326S When small size and high performance are needed, the SOP package, such as the C226S or C326S, is the industry choice. Both the C226S and the C326S feature low on-resistance, high load-current capacity, and low off-state leakage current. In addition, the C326S offers two fully-independent form A channels for further space savings. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. C226S/C326S Features u Contact Form: C226S: 1 Form A / C326S: 2 Form A u Load Voltage: 40V Maximum u Must Operate LED Current: 3.0mA Maximum u Load Current: C226S:2.0A Maximum / C326S: 1.6A Maximum u Low On-Resistance: 0.085 Typical u Output Capacitance: 240pF Typical u Low Off-State Leakage Current: 1.0A Maximum DIMENSIONS in Inches (Millimeters) C226S C326S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 30 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C226S/C326S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 40V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 2.0A (1Ch) / 1.6A (2Ch) Peak Load Current IPeak A 3.5A Output Power Dissipation POut mW 350mW (1Ch) / 450mW (2Ch) PT mW 400mW (1Ch) / 500mW (2Ch) I/O Breakdown Voltage VI/O V Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms C226S/C326S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min Typ Max VF IF=10mA V 1.0 1.37 1.5 0.5 3.0 0.085 0.5 Operation LED Current IF On mA Recovery LED Voltage VF Off V 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=40V A Output Capacitance COut VL=0V, f=1MHz pF 240 ms 0.5 3.0 ms 0.04 0.5 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 31 (R) C247S/C347S CotoMOS C247S/C347S The C247S and C347S feature high current switching capability to 1.25A with a low on resistance of 0.5 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 80V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. C247S/C347S Features u Contact Form: C247S: 1a / C347S: 2a u Load Voltage: 80V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C247S: 1.25A Maximum / C347S: 1.0A Maximum u On-Resistance: 0.15 Typical u Output Capacitance: 190pF Typical u Low Off-State Leakage Current: 1.0A Maximum DIMENSIONS in Inches (Millimeters) C247S C347S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 32 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C247S/C347S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 80V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 1.25A (1Ch) / 1.0A (2Ch) Peak Load Current IPeak A 3.0A Output Power Dissipation POut mW 350mW (1Ch) / 450mW (2Ch) PT mW 400mW (1Ch) / 500mW (2Ch) I/O Breakdown Voltage VI/O V Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms C247S/C347S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min Typ Max VF IF=10mA V 1.0 1.37 1.5 1.2 3.0 0.15 0.5 Operation LED Current IF On mA Recovery LED Voltage VF Off V 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=80V A Output Capacitance COut VL=0V, f=1MHz pF 190 ms 0.6 5.0 ms 0.06 0.5 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 33 (R) C230S/C330S CotoMOS C230S/C330S When small size and high performance are needed, the SOP package, such as the C230S or C330S, is the industry choice. Both the C230S and the C330S feature high load voltage capability and the opportunity for efficient board layout, saving precious board space without compromising on performance. In addition, the C330S offers two fully-independent form A channels for further space savings. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. C230S/C330S Features u Contact Form: C230S: 1a / C330S: 2a u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C230S: 100mA Maximum / C330S: 85mA Maximum u On-Resistance: 24 Typical u Output Capacitance: 115pF Typical u Low Off-State Leakage Current: 1.0A Maximum DIMENSIONS in Inches (Millimeters) C230S C330S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 34 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C230S/C330S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 400V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 100mA (1Ch) / 85mA (2Ch) Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 300mW (1Ch) / 450mW (2Ch) PT mW 350mW (1Ch) / 500mW (2Ch) V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C C230S/C330S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 24 30 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=400V A Output Capacitance COut VL=0V, f=1MHz pF 115 ms 0.25 0.5 ms 0.02 0.2 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 35 (R) C231S/C331S CotoMOS C231S/C331S When small size and high performance are needed, the SOP package, such as the C231S or C331S, is the industry choice. Both the C231S and the C331S feature high load voltage capability and the opportunity for efficient board layout, saving precious board space without compromising on performance. In addition, the C331S offers two fully-independent form A channels for further space savings. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. C231S/C331S Features u Contact Form: C231S: 1a / C331S: 2a u Load Voltage: 350V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C231S: 120mA Maximum / C331S: 100mA Maximum u On-Resistance: 24 Maximum u Output Capacitance: 115pF Typical u Low Off-State Leakage Current: 1.0A Maximum DIMENSIONS in Inches (Millimeters) C231S C331S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 36 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C231S/C331S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 350V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 120mA (1Ch) / 100mA (2Ch) Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 300mW (1Ch) / 450mW (2Ch) PT mW 350mW (1Ch) / 500mW (2Ch) V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C C231S/C331S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 17 24 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=350V A Output Capacitance COut VL=0V, f=1MHz pF 115 ms 0.25 0.5 ms 0.05 0.2 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 37 (R) C234S/C334S CotoMOS C234S/C334S The C234S and C334S feature current switching capability to 180mA with a low on resistance of 8 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 200V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CS234S/CS334S Features u Contact Form: C234S: 1a / C334S: 2a u Load Voltage: 200V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C234S: 180mA Maximum / C334S: 160mA Maximum u On-Resistance: 8 Maximum u Output Capacitance: 130pF Typical u Low Off-State Leakage Current: 1.0A Maximum DIMENSIONS in Inches (Millimeters) C234S C334S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 38 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C234S/C334S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 200V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 180mA (1Ch) / 160mA (2Ch) Peak Load Current IPeak A 0.8A Output Power Dissipation POut mW 300mW (1Ch) / 450mW (2Ch) PT mW 350mW (1Ch) / 500mW (2Ch) V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C C234S/C334S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 6.0 8.0 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=200V A Output Capacitance COut VL=0V, f=1MHz pF 130 ms 0.25 0.5 ms 0.05 0.2 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 39 (R) C235S/C335S CotoMOS C235S/C335S The C235S and C335S feature current switching capability to 80mA with a low on resistance of 30 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 80V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. C235S/C335S Features u Contact Form: C235S: 1a / C335S: 2a u Load Voltage: 80V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C235S: 80mA Maximum / C335S: 70mA Maximum u On-Resistance: 30 Maximum u Output Capacitance: 6pF Typical u Low Off-State Leakage Current: 10nA Maximum DIMENSIONS in Inches (Millimeters) C235S C335S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 40 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C235S/C335S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 80V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 80mA (1Ch) / 70mA (2Ch) Peak Load Current IPeak A 0.3A Output Power Dissipation POut mW 200mW (1Ch) / 400mW (2Ch) PT mW 225mW (1Ch) / 450mW (2Ch) I/O Breakdown Voltage VI/O V Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms C235S/C335S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 20 30 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=80V nA Output Capacitance COut VL=0V, f=1MHz pF 6.0 ms 0.02 0.5 ms 0.05 0.2 10 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=10mA COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 41 (R) C237S/C337S CotoMOS C237S/C337S When small size and high performance are needed, the SOP package, such as the C237S or C337S, is the industry choice. Both the C237S and the C337S feature low on resistance fast turn on time. In addition, the C337S offers two fully-independent form A channels for further space savings. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. C237S/C337S Features u Contact Form: C237S: 1a / C337S: 2a u Load Voltage: 60V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C237S: 350mA Maximum / C337S: 320mA Maximum u On-Resistance: 1.6 Maximum u Output Capacitance: 195pF Typical u Low Off-State Leakage Current: 1.0mA Maximum DIMENSIONS in Inches (Millimeters) C237S C337S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 42 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C237S/C337S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 60V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 350mA (1Ch) / 320mA (2Ch) Peak Load Current IPeak A 2.0A Output Power Dissipation POut mW 200mW (1Ch) / 400mW (2Ch) PT mW 225mW (1Ch) / 450mW (2Ch) I/O Breakdown Voltage VI/O V Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms C237S/C337S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 0.8 1.6 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=60V mA Output Capacitance COut VL=0V, f=1MHz pF 195 ms 0.35 1.5 ms 0.05 0.2 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 43 (R) C245S/C345S CotoMOS C245S/C345S The C245S and C345S feature current switching capability to 100mA with a low on resistance of 14 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 60V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. C245S/C345S Features u Contact Form: C245S: 1a / C345S: 2a u Load Voltage: 60V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 100mA Maximum u On-Resistance: 14 Maximum u Output Capacitance: 20pF Typical u Low Off-State Leakage Current: 1.0A Maximum DIMENSIONS in Inches (Millimeters) C245S C345S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 44 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C245S/C345S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 60V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 100mA Peak Load Current IPeak A 350mA Output Power Dissipation POut mW 200mW (1Ch) / 400mW (2Ch) PT mW 225mW (1Ch) / 450mW (2Ch) I/O Breakdown Voltage VI/O V Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms C245S/C345S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 3.0 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. 14 Off-State Leakage Current ILeak VL=60V A 1.0 Output Capacitance COut VL=0V, f=1MHz pF 20 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating ms 3.0 ms 1.0 COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 45 (R) C574S/C674S CotoMOS C574S/C674S The C574S and C674S feature current switching capability to 70mA with a low on resistance of 50 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 400V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. C574S/C674S Features u Contact Form: C574S: 1b / C674S: 2b u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C574S: 70mA Maximum / C674S: 60mA Maximum u On-Resistance: 50 Maximum u Output Capacitance: 165pF Typical u Low Off-State Leakage Current: 10A Maximum DIMENSIONS in Inches (Millimeters) C574S C674S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 46 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C574S/C674S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 400V (AC peak or DC) Load Current IL A 70mA (1Ch) / 60mA (2Ch) OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 300mW (1Ch) / 450mW (2Ch) Total Power Dissipation PT mW 350mW (1Ch) / 500mW (2Ch) I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS C574S/C674S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 30 50 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=400V A Output Capacitance COut VL=0V, f=1MHz pF 165 ms 0.05 3.0 ms 0.05 1.0 10 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 47 (R) C774S CotoMOS C774S The C774S features current switching capability to 80/60mA with a low on resistance of 30/50 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 400V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. C774S Features u Contact Form: 1a+1b u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 80mA Maximum (NO) 60mA Maximum (NC) u On-Resistance: 30 Maximum (NO) 50 Maximum (NC) u Output Capacitance: 115pF Typical (NO) 165pF Typical (NC) u Low Off-State Leakage Current: 1.0 A Maximum (NO) 10A Maximum (NC) DIMENSIONS in Inches (Millimeters) 0.382(9.7) Max. 0.100(2.54) 0.200(0.5) 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) 0.006(0.15) 0.079(2.0) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 NC NO 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 48 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C774S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 400V (AC peak or DC) Load Current IL A 80mA (NO) / 60mA (NC) OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.4A Output Power Dissipation POut mW 400mW Total Power Dissipation PT mW 450mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS C774S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 24 (NO) 30 (NC) 30 (NO) 50 (NC) 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA (NO), IF=0mA (NC), IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak IF=0mA (NO), IF=5mA (NC), VL=400V A Output Capacitance COut IF=0mA (NO), IF=5mA (NC) VL=0V, f=1MHz pF 115 (NO) 165 (NC) Operate Time TOn (NO) TOff (NC) IF=0mA 5mA (NC), IL=Rating ms 0.25 (NO) 0.5 (NC) 2.0 Recovery Time TOff (NO) TOn (NC) IF=0mA 5mA (NC), IL=50mA ms 0.05 1.0 1 (NO) 10 (NC) TRANSMISSION COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 49 (R) CT326/CS326 CotoMOS CT326/CS326 The CT326 and CS326 feature high current switching capability to 2.0A with a low on resistance of 0.5 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 40V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT326/CS326 Features u Contact Form: 2a u Load Voltage: 40V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 2.0A Maximum u On-Resistance: 0.5 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT326 CS326 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 50 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT326/CS326 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 40V (AC peak or DC) Load Current IL A 2.0A OUTPUT SPECIFICATIONS Peak Load Current IPeak A 3.5A Output Power Dissipation POut mW 600mW Total Power Dissipation PT mW 650mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT326/CS326 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min Typ Max VF IF=10mA V 1.0 1.37 1.5 0.5 3.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V 0.5 1.1 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=40V A Output Capacitance COut VL=0V, f=1MHz pF 240 ms 0.5 3.0 ms 0.05 1.0 0.085 0.5 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 51 (R) CT330/CS330 CotoMOS CT330/CS330 The CT330 and CS330 feature current switching capability to 100mA with a low on resistance of 30 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 400V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT330/CS330 Features u Contact Form: 2a u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 100mA Maximum u On-Resistance: 30 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT330 CS330 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 52 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT330/CS330 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 400V (AC peak or DC) Load Current IL A 100mA OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 600mW Total Power Dissipation PT mW 650mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT330/CS330 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 24 30 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=400V A Output Capacitance COut VL=0V, f=1MHz pF 115 ms 0.2 1.0 ms 0.05 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 53 (R) CT331/CS331 CotoMOS CT331/CS331 The CT331 and CS331 feature current switching capability to 110mA with a low on resistance of 24 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 350V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT331/CS331 Features u Contact Form: 2a u Load Voltage: 350V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 110mA Maximum u On-Resistance: 24 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT331 CS331 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 54 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT331/CS331 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 350V (AC peak or DC) Load Current IL A 110mA OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 600mW Total Power Dissipation PT mW 650mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT331/CS331 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 17 24 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=350V A Output Capacitance COut VL=0V, f=1MHz pF 115 ms 0.2 1.0 ms 0.05 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 55 (R) CT334/CS334 CotoMOS CT334/CS334 The CT334 and CS334 feature current switching capability to 180mA with a low on resistance of 8 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 200V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT334/CS334 Features u Contact Form: 2a u Load Voltage: 200V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 180mA Maximum u On-Resistance: 8 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT334 CS334 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 56 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT334/CS334 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 200V (AC peak or DC) Load Current IL A 180mA OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.8A Output Power Dissipation POut mW 600mW Total Power Dissipation PT mW 650mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT334/CS334 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 6.0 8.0 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=200V A Output Capacitance COut VL=0V, f=1MHz pF 130 ms 0.2 1.0 ms 0.05 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 57 (R) CT335/CS335 CotoMOS CT335/CS335 The CT335 and CS335 feature current switching capability to 80mA with a low on resistance of 30 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 80V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT335/CS335 Features u Contact Form: 2a u Load Voltage: 80V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 80mA Maximum u On-Resistance: 30 Maximum u Low Off-State Leakage Current: 10nA Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT335 CS335 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 58 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT335/CS335 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 80V (AC peak or DC) Load Current IL A 80mA OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.3A Output Power Dissipation POut mW 450mW Total Power Dissipation PT mW 500mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT335/CS335 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 20 30 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=80V nA Output Capacitance COut VL=0V, f=1MHz pF 6.0 ms 0.02 1.0 ms 0.05 1.0 10 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 59 (R) CT337/CS337 CotoMOS CT337/CS337 The CT337 and CS337 feature current switching capability to 360mA with a low on resistance of 1.6 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 60V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT337/CS337 Features u Contact Form: 2a u Load Voltage: 60V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 360mA Maximum u On-Resistance: 1.6 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT337 CS337 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 60 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT337/CS337 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 60V (AC peak or DC) Load Current IL A 360A OUTPUT SPECIFICATIONS Peak Load Current IPeak A 2.0A Output Power Dissipation POut mW 600mW Total Power Dissipation PT mW 650mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT337/CS337 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 0.8 1.6 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=60V A Output Capacitance COut VL=0V, f=1MHz pF 195 ms 0.3 1.0 ms 0.05 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 61 (R) CT338/CS338 CotoMOS CT338/CS338 The CT338 and CS338 feature current switching capability to 70mA with a low on resistance of 60 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 600V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT338/CS338 Features u Contact Form: 2a u Load Voltage: 600V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 70mA Maximum u On-Resistance: 60 Maximum u Low Off-State Leakage Current: 1.0A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT338 CS338 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 62 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT338/CS338 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 600V (AC peak or DC) Load Current IL A 70mA OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.2A Output Power Dissipation POut mW 600mW Total Power Dissipation PT mW 650mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT338/CS338 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 35 60 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=600V A Output Capacitance COut VL=0V, f=1MHz pF 95 ms 0.1 1.0 ms 0.05 1.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 63 (R) CT474/CS474 CotoMOS CT474/CS474 The CT474 and CS474 feature current switching capability to 90mA with a low on resistance of 50 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 400V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT474/CS474 Features u Contact Form: 1b u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 90mA Maximum u On-Resistance: 50 Maximum u Low Off-State Leakage Current: 10A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT474 CS474 0.051(1.3) 0.358(9.1)Max. 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 64 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT474/CS474 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 400V (AC peak or DC) Load Current IL A 90mA OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 450mW Total Power Dissipation PT mW 500mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT474/CS474 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 30 50 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=10mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=400V A Output Capacitance COut VL=0V, f=1MHz pF 165 ms 0.35 2.0 ms 0.05 1.0 10 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 65 (R) CT674/CS674 CotoMOS CT674/CS674 The CT674 and CS674 feature current switching capability to 80mA with a low on resistance of 50 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 400V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT674/CS674 Features u Contact Form: 2b u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 80mA Maximum u On-Resistance: 50 Maximum u Low Off-State Leakage Current: 10A Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT674 CS674 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 66 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT674/CS674 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 400V (AC peak or DC) Load Current IL A 80mA OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.6A Output Power Dissipation POut mW 600mW Total Power Dissipation PT mW 650mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT674/CS674 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 30 50 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=10mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=400V A Output Capacitance COut VL=0V, f=1MHz pF 165 ms 0.35 2.0 ms 0.05 1.0 10 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 67 (R) CT774/CS774 CotoMOS CT774/CS774 The CT774 and CS774 feature current switching capability to 80/100mA with a low on resistance of 30/50 Maximum. Designed for Security, Measurement and Instrumentation applications the CotoMOS(R) relay is capable of handling 400V load conditions. If your requirements are different please contact your Coto Applications Engineer for assistance through www.cotorelay.com. CT774/CS774 Features u Contact Form: 1a+1b u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 100mA Maximum (NO) 80mA Maximum (NC) u On-Resistance: 30 Maximum (NO) 50 Maximum (NC) u Low Off-State Leakage Current: 1.0A Maximum (NO) 10A Maximum (NC) u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix -H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CT774 CS774 0.398(10.1)Max. 0.398(10.1)Max. 0.047(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.100(2.54) IDENTIFIES PIN #1 0.051(1.3) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.047(1.2) 0.134(3.4) 0.004(0.1) 0.154(3.9)Max. 0.020(0.5) 0.162(4.1) 0.020(0.5) 0.300(7.62) .118(3.0) 0.100(2.54) 0.300(7.62) TERMINAL IDENTIFICATION 8 7 6 5 NC NO 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 68 | page 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 CT774/CS774 MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW Load Voltage VL V 400V (AC peak or DC) Load Current IL A 100mA (NO) 80mA (NC) OUTPUT SPECIFICATIONS Peak Load Current IPeak A 0.4A Output Power Dissipation POut mW 600mW Total Power Dissipation PT mW 650mW I/O Breakdown Voltage VI/O V 1500Vrms Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C RELAY SPECIFICATIONS CT774/CS774 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 24(NO) 30(NC) 30(NO) 50(NC) 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=1mA(NO), IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak IF=0mA (NO), IF=5mA (NC), VL=400V A Output Capacitance COut IF=0mA (NO), IF=5mA (NC), VL=0V, f=1MHz pF 115(NO) 165(NC) Turn-On Time TOn IF=0mA 10mA (NC), IF=Rating ms 0.2(NO) 0.35(NC) 2.0 Turn-Off Time TOff IF=10mA 0mA (NC), IL=Rating ms 0.05 1.0 1(NO) 10(NC) TRANSMISSION COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 69 (R) C238S/C338S CotoMOS C238S/C338S When small size and high performance are needed, the SOP package, such as the C238S or C338S, is the industry choice. Both the C238S and the C338S feature low on resistance fast turn on time. In addition, the C338S offers two fully-independent form A channels for further space savings. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. C238S/C338S Features u Contact Form: C238S: 1a / C338S: 2a u Load Voltage: 600V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C238S: 70mA Maximum / C338S: 60mA Maximum u On-Resistance: 60 Maximum u Output Capacitance: 95pF Typical u Low Off-State Leakage Current: 1.0A Maximum DIMENSIONS in Inches (Millimeters) C238S C338S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.173(4.4) 0.200(0.5) 1 2 (+) (-) 70 | page 0.006(0.15) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C238S/C338S MAXIMUM RATINGS (Ambient Temperature: 25C) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 600V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 70mA (1Ch) / 60mA (2Ch) Peak Load Current IPeak A 200mA Output Power Dissipation POut mW 300mW (1Ch) / 450mW (2Ch) PT mW 350mW (1Ch) / 500mW (2Ch) V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40C ~ +85C Storage Temperature TStg -40C ~ +100C C238S/C338S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25C) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min Typ Max VF IF=10mA V 1.0 1.17 1.5 0.9 3.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V 0.5 1.0 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Off-State Leakage Current ILeak VL=600V A Output Capacitance COut VL=0V, f=1MHz pF 95 ms 0.2 0.5 ms 0.05 0.2 35 60 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating (for SOP type) COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40C to +85 C; Storage Temp: -40 to +100 C. All electrical parameters measured at 25 C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 71