NICKEL METAL HYDRIDE BATTERIES: INDIVIDUAL DATA SHEET Typical Charge Characteristics HHR380A Cylindrical L-A size (HR 17/67) Dimensions (with Tube) (mm) 2.0 1.9 Charge: 2000mA- V=10mV 1.8 Voltage (V) 1.7 17.0 +- 00.7 1.6 1.5 1.4 1.3 1.2 1.1 (+) 0C 20C 45C 1.0 0.9 0.8 0 20 40 60 80 100 120 140 160 Charge Time (minutes) 67.0 +- 01.5 Typical Discharge Characteristics 1.8 Charge: 2000mA dT/dt=1.0C/min,20C Disharge Temperature: 20C 1.7 1.6 Voltage (V) 1.5 ( ) 1.4 1.3 1.2 1.1 Specifications 1.0 mm inch Diameter 17.0+0/-0.7 0.67+0/-0.03 Height 67.0+0/-1.5 2.64+0/-0.06 Approximate Weight Grams Ounces 53 1.87 Nominal Voltage Ambient Temperature Charge Standard Rapid Discharge Storage < 1 year < 3 months < 1 month 3 4 5 6 Charge: 2000mA,dT/dt=1.0C/min.20C Disharge Temperature: 20C 1.7 1.6 3700 mAh 25m 370mA (0.1It) x 16hrs. 2000mA dT/dt 0C to 45C 0C to 40C -10C to 65C -20C to 35C -20C to 45C -20C to 55C 2 1.8 3800 mAh C 1 Discharge Time (hours) Voltage (V) Rated (Min.) Approx. Internal impedance at 1000Hz at charged state. Standard Charge Rapid*** 0.8 0 1.2V Average** Discharge Capacity* 760mA(0.2 It) 0.9 1.5 1.4 1.3 1.2 1.1 F 32F to 113F 32F to 104F 14F to 149F -4F to 95F -4F to 113F -4F to 131F 1.0 2000mA(0.53 It) 3800mA(1 It) 0.9 0.8 0 10 20 30 40 50 60 70 80 90 100 110 120 Discharge Time (minutes) * After charging at 0.1It for 16 hours, discharging at 0.2It. ** For reference only. *** For rapid charge: use dT/dt charge termination method. Refer to the Nickel Metal Hydride "Charge Methods" section for further details. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge / discharge specs, warning label contents and unit design. Note: [It] was previously expressed as [C]. [It] is an IEC standard expression for the amount of charge or discharge current and is expressed as: It(A) = Cn (Ah)/1h. * [It] is the reference test current in ampres * [Cn] is the rated capacity of the cell or battery in Ampere-hours. n = the time base [hours] for which the rated capacity is declared NICKEL METAL HYDRIDE HANDBOOK AUGUST 2005 This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to modification without notice. Contact Panasonic for the latest information.