SCLS379J − AUGUST 1997 − REVISED JUNE 2005
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DOperating Range of 2 V to 5.5 V
DMax tpd of 6 ns at 5 V
DLow Power Consumption, 10-µA Max ICC
D±8-mA Output Drive at 5 V
DLatch-Up Performance Exceeds 250 mA Per
JESD 17
3
2
4
51
OE VCC
Y
A
GND
DBV PACKAGE
(TOP VIEW) DCK PACKAGE
(TOP VIEW)
3
2
4
51
OE VCC
Y
A
GND
3
2
4
51
OE VCC
Y
A
GND
DRL PACKAGE
(TOP VIEW)
See mechanical drawings for dimensions.
description/ordering information
The SN74AHC1G126 is a single bus buffer gate/line driver with 3-state output. The output is disabled when the
output-enable (OE) input is low. When OE is high, true data is passed from the A input to the Y output.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a
pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the
driver.
ORDERING INFORMATION
TAPACKAGE†ORDERABLE
PART NUMBER TOP-SIDE
MARKING‡
SOT (SOT-23) – DBV
Reel of 3000 SN74AHC1G126DBVR
A26_
SOT (SOT-23) – DBV Reel of 250 SN74AHC1G126DBVT A26_
−40°C to 85°C
SOT (SC-70) – DCK
Reel of 3000 SN74AHC1G126DCKR
AN_
−40 C to 85 C
SOT (SC-70) – DCK
Reel of 250 SN74AHC1G126DCKT
AN_
SOT (SOT-553) – DRL Reel of 4000 SN74AHC1G126DRLR AN_
†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
‡The actual top-side marking has one additional character that designates the assembly/test site.
FUNCTION TABLE
INPUTS
OUTPUT
OE A
OUTPUT
Y
H H H
HLL
L X Z
logic diagram (positive logic)
AY
OE 1
24
Copyright 2005, Texas Instruments Incorporated
!" # $%&" !# '%()$!" *!"&+
*%$"# $ " #'&$$!"# '& ",& "&# &-!# #"%&"#
#"!*!* .!!"/+ *%$" '$&##0 *&# " &$&##!)/ $)%*&
"&#"0 !)) '!!&"&#+
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SCLS379J − AUGUST 1997 − REVISED JUNE 2005
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC −0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Note 1) −0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, VO (see Note 1) −0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0) −20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VCC)±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, IO (VO = 0 to VCC)±25 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through VCC or GND ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θJA (see Note 2): DBV package 206°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DCK package 252°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DRL package 142°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg −65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 3)
MIN MAX UNIT
VCC Supply voltage 2 5.5 V
VCC = 2 V 1.5
V
IH
High-level input voltage VCC = 3 V 2.1 V
VIH
High-level input voltage
VCC = 5.5 V 3.85
V
VCC = 2 V 0.5
V
IL
Low-level input voltage VCC = 3 V 0.9 V
VIL
Low-level input voltage
VCC = 5.5 V 1.65
V
VIInput voltage 0 5.5 V
VOOutput voltage 0 VCC V
VCC = 2 V −50 mA
I
OH
High-level output current VCC = 3.3 V ± 0.3 V −4
mA
IOH
High-level output current
VCC = 5 V ±0.5 V −8 mA
VCC = 2 V 50 mA
I
OL
Low-level output current VCC = 3.3 V ±0.3 V 4
mA
IOL
Low-level output current
VCC = 5 V ±0.5 V 8mA
∆t/∆v
Input transition rise or fall rate
VCC = 3.3 V ± 0.3 V 100
ns/V
∆t/∆vInput transition rise or fall rate VCC = 5 V ±0.5 V 20 ns/V
TAOperating free-air temperature −40 85 °C
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
SCLS379J − AUGUST 1997 − REVISED JUNE 2005
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
TA = 25°C
MIN
MAX
UNIT
PARAMETER
TEST CONDITIONS
V
CC MIN TYP MAX
MIN
MAX
UNIT
2 V 1.9 2 1.9
I
OH
= −50 mA3 V 2.9 3 2.9
V
OH
IOH = −50 mA
4.5 V 4.4 4.5 4.4 V
VOH
IOH = −4 mA 3 V 2.58 2.48
V
IOH = −8 mA 4.5 V 3.94 3.8
2 V 0.1 0.1
I
OL
= 50 mA3 V 0.1 0.1
V
OL
IOL = 50 mA
4.5 V 0.1 0.1 V
VOL
IOL = 4 mA 3 V 0.36 0.44
V
IOL = 8 mA 4.5 V 0.36 0.44
IIVI = 5.5 V or GND 0 V to 5.5 V ±0.1 ±1mA
IOZ VI = VCC or GND 5.5 V ±0.25 ±2.5 mA
ICC VI = VCC or GND, IO = 0 5.5 V 1 10 mA
CiVI = VCC or GND 5 V 4 10 10 pF
CoVO = VCC or GND 5 V 10 pF
switching characteristics over recommended operating free-air temperature range,
VCC = 3.3 V ±0.3 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
TO
LOAD
TA = 25°C
MIN
MAX
UNIT
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE MIN TYP MAX
MIN
MAX
UNIT
tPLH
A
Y
CL = 15 pF
5.6 8 1 9.5
ns
tPHL A Y CL = 15 pF 5.6 8 1 9.5 ns
tPZH
OE
Y
CL = 15 pF
5.4 8 1 9.5
ns
tPZL
OE
Y CL = 15 pF 5.4 8 1 9.5 ns
tPHZ
OE
Y
CL = 15 pF
7 9.7 1 11.5
ns
tPLZ
OE
Y
C
L
= 15 pF
7 9.7 1 11.5
ns
tPLH
A
Y
CL = 50 pF
8.1 11.5 1 13
ns
tPHL A Y CL = 50 pF 8.1 11.5 1 13 ns
tPZH
OE
Y
CL = 50 pF
7.9 11.5 1 13
ns
tPZL
OE
Y CL = 50 pF 7.9 11.5 1 13 ns
tPHZ
OE
Y
CL = 50 pF
9.5 13.2 1 15
ns
tPLZ
OE
Y
C
L
= 50 pF
9.5 13.2 1 15
ns
SCLS379J − AUGUST 1997 − REVISED JUNE 2005
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
switching characteristics over recommended operating free-air temperature range,
VCC = 5 V ±0.5 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
TO
LOAD
TA = 25°C
MIN
MAX
UNIT
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE MIN TYP MAX
MIN
MAX
UNIT
tPLH
A
Y
CL = 15 pF
3.8 5.5 1 6.5
ns
tPHL A Y CL = 15 pF 3.8 5.5 1 6.5 ns
tPZH
OE
Y
CL = 15 pF
3.6 5.1 1 6
ns
tPZL
OE
Y CL = 15 pF 3.6 5.1 1 6 ns
tPHZ
OE
Y
CL = 15 pF
4.6 6.8 1 8
ns
tPLZ
OE
Y
C
L
= 15 pF
4.6 6.8 1 8
ns
tPLH
A
Y
CL = 50 pF
5.3 7.5 1 8.5
ns
tPHL A Y CL = 50 pF 5.3 7.5 1 8.5 ns
tPZH
OE
Y
CL = 50 pF
5.1 7.1 1 8
ns
tPZL
OE
Y CL = 50 pF 5.1 7.1 1 8 ns
tPHZ
OE
Y
CL = 50 pF
6.1 8.8 1 10
ns
tPLZ
OE
Y
C
L
= 50 pF
6.1 8.8 1 10
ns
operating characteristics, VCC = 5 V, TA = 25°C
PARAMETER TEST CONDITIONS TYP UNIT
Cpd Power dissipation capacitance No load, f = 1 MHz 14 pF
SCLS379J − AUGUST 1997 − REVISED JUNE 2005
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
50% VCC
VCC
VCC
0 V
0 V
th
tsu
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
Data Input
tPLH
tPHL
tPHL
tPLH
VOH
VOH
VOL
VOL
VCC
0 V
50% VCC
50% VCC
Input
Out-of-Phase
Output
In-Phase
Output
Timing Input
50% VCC
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
Output
Control
Output
Waveform 1
S1 at VCC
(see Note B)
Output
Waveform 2
S1 at GND
(see Note B)
VOL
VOH
tPZL
tPZH
tPLZ
tPHZ
≈VCC
0 V
50% VCC VOL + 0.3 V
50% VCC ≈0 V
VCC
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
Open Drain
Open
VCC
GND
VCC
TEST S1
VCC
0 V
50% VCC
tw
VOLTAGE WAVEFORMS
PULSE DURATION
Input
NOTES: A. CL includes probe and jig capacitance.
B. W aveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤3 ns, tf ≤ 3 ns.
D. The outputs are measured one at a time, with one input transition per measurement.
E. All parameters and waveforms are not applicable to all devices.
From Output
Under Test CL
(see Note A)
LOAD CIRCUIT FOR
3-STATE AND OPEN-DRAIN OUTPUTS
S1
V
CC
RL = 1 kΩ
GND
From Output
Under Test CL
(see Note A)
Test
Point
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
Open
50% VCC
50% VCC 50% VCC
50% VCC
50% VCC 50% VCC
50% VCC 50% VCC
VOH − 0.3 V
Figure 1. Load Circuit and Voltage Waveforms
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
74AHC1G126DBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
74AHC1G126DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
74AHC1G126DBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
74AHC1G126DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
74AHC1G126DCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
74AHC1G126DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
74AHC1G126DCKTE4 ACTIVE SC70 DCK 5 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
74AHC1G126DCKTG4 ACTIVE SC70 DCK 5 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
74AHC1G126DRLRG4 ACTIVE SOT DRL 5 4000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AHC1G126DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AHC1G126DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AHC1G126DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AHC1G126DCKT ACTIVE SC70 DCK 5 250 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AHC1G126DRLR ACTIVE SOT DRL 5 4000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
PACKAGE OPTION ADDENDUM
www.ti.com 22-Oct-2007
Addendum-Page 1
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 22-Oct-2007
Addendum-Page 2
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
SN74AHC1G126DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
SN74AHC1G126DBVR SOT-23 DBV 5 3000 178.0 9.2 3.3 3.2 1.55 4.0 8.0 Q3
SN74AHC1G126DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
SN74AHC1G126DBVT SOT-23 DBV 5 250 178.0 9.2 3.3 3.2 1.55 4.0 8.0 Q3
SN74AHC1G126DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
SN74AHC1G126DCKT SC70 DCK 5 250 178.0 9.2 2.4 2.4 1.22 4.0 8.0 Q3
SN74AHC1G126DCKT SC70 DCK 5 250 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
SN74AHC1G126DRLR SOT DRL 5 4000 180.0 8.4 1.98 1.78 0.69 4.0 8.0 Q3
PACKAGE MATERIALS INFORMATION
www.ti.com 30-Jul-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN74AHC1G126DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0
SN74AHC1G126DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0
SN74AHC1G126DBVT SOT-23 DBV 5 250 180.0 180.0 18.0
SN74AHC1G126DBVT SOT-23 DBV 5 250 180.0 180.0 18.0
SN74AHC1G126DCKR SC70 DCK 5 3000 180.0 180.0 18.0
SN74AHC1G126DCKT SC70 DCK 5 250 180.0 180.0 18.0
SN74AHC1G126DCKT SC70 DCK 5 250 180.0 180.0 18.0
SN74AHC1G126DRLR SOT DRL 5 4000 202.0 201.0 28.0
PACKAGE MATERIALS INFORMATION
www.ti.com 30-Jul-2012
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
