IM01GR - M/A-COM / Tyco Electronics

IM Relay

The Best Relaytion

Slim line AND low profile

2 pole telecom/signal relay, polarized

Through Hole Types (THT), standard version

with 5.08 mm, narrow version with 3.2 mm between

the terminal rows

Surface Mount Type (SMT)

Relay types: non-latching with 1 coil

latching with 1 coil

Features

- Telecom/signal relay (dry circuit, test access, ringing)

- Slim line10 x 6 mm, 0.39 x 0.24 inch

- Low profile 5.65 mm, 0.222 inch

- Minimum board-space 60 mm2

- Switching current 2 A

- 2 changeover contacts (2 form C / DPDT)

- Bifurcated contacts, gold plated

- High sensitivity results in low nominal power consumption

140 mW for non latching

100 mW for latching version

- High surge capability (1.2/50 µs and 10/700 µs) meets

Bellcore GR 1089, FCC Part 68 and ITU-T K20

³1500 V between open contacts

³ 2500 V between coil and contacts

- High mechanical shock resistance

up to 300 G functional

up to 500 G survival

Typical applications:

- Communications equipment

Linecard application – analog, ISDN, xDSL,

PABX

Voice over IP

- Office and business equipment

- Measurement and control equipment

- Consumer electronics

Set top boxes, HiFi

- Medical equipment

Options:

Surge capability ³ 2500 V between open contacts

IM Relay

Insulation category:

Supplementary insulation according IEC/EN 60950 and UL 1950

Working voltage £ 300 Vrms

Mains supply voltage SMT: 250 Vrms

THT: 200 Vrms

Repetitive peak voltage 2500 V

Pollution degree: External: 2

Internal: 1

Flammability classification: V-0

Maximum operating temperature: 85°C

CSA-C22.2 No. 14-95 File No. 169679-1079886

CSA-C22.2 No. 950-95

UL 508 File No. E111441

UL 1950 3rd ed.

QC 160501-CH0001

IEC/EN60950 IEC Ref. Cert. No. 1176

CECC 16501-003

IM Relay

THT Version

Mounting hole layout

View onto the component side of the PCB

(top view)

Terminal assignment

Relay - top view

Non-latching type,

not energized condition

Dimensions

IM THT IM THT IM SMT IM SMT

Standard Narrow Gull Wings J-Legs

mm inch mm inch mm inch

L 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003

W6 ±0.08 0.236 ±0.003 5.7 ±0.3 0.224 ±0.012 6 ±0.08 0.236 ±0.003 6 ±0.08 0.236 ±0.003

H 5.65 -0.2 0.222 -0.008 5.85 -0.15 0.230 -0.006 5.65 -0.2 0.222 -0.008 5.65 -0.2 0.222 -0.008

T 3.2 0.125 3.2 0.125 N/A N/A N/A N/A

T1 N/A N/A N/A N/A 7.5 ±0.3 0.295 ±0.011 2.8 ±0.2 0.110 ±0.007

T2 5.08±0.1 0.200 ±0.004 3.2±0.1 0.126 ±0.006 5.08 ±0.1 0.200 ±0.004 5.08 ±0.1 0.200 ±0.004

D1 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006 3.2 ±0.15 0.126 ±0.006

D2 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006 2.2 ±0.15 0.087 ±0.006

Tw 0.4 0.015 0.4 0.015 0.4 0.015 0.4 0.015

S 0.3 ±0.05 0.011 ±0.002 0.3 ±0.05 0.011 ±0.002 N/A N/A N/A N/A

SMT Version

Gull Wings J Legs

Solder pad layout

View onto the component side of the PCB

(top view)

Gull Wings J Legs

Ø min. 0.75

Latching type, 1 coil

reset condition

Standard version Narrow version

1.5 1.13 3.4 0.15 140 16 IM00

3 2.1 6.8 0.30 140 64 IM01

4.5 3.15 10.3 0.45 140 145 IM02

5 3.5 11.4 0.50 140 178 IM03

6 4.2 13.7 0.60 140 257 IM04

9 6.3 20.4 0.90 140 574 IM05

12 8.4 27.3 1.20 140 1028 IM06

24 16.8 45.6 2.40 200 2880 IM07

Coil Data (values at 23°C)

Nominal Operate/set voltage range Release/ Nominal power Resistance Relay code

voltage reset voltage consumption

Unom Minimum Maximum Minimum

voltage UIvoltage UII

Vdc Vdc Vdc Vdc mW W / ± 10 %

non-latching

1 coil

latching

1 coil

1.5 1.13 4.1 - 1.13 100 23 IM40

3 2.25 8.1 - 2.25 100 90 IM41

4.5 3.38 12.1 - 3.38 100 203 IM42

5 3.75 13.5 - 3.75 100 250 IM43

6 4.5 16.2 - 4.50 100 360 IM44

9 6.75 24.2 - 6.75 100 810 IM45

12 9.00 32.3 - 9.00 100 1440 IM46

24 18.00 41.9 - 18.00 200 2880 IM47

Further coil versions are available on request.

IM Relay

Ambient temperature tamb [°C]

UI = Minimum voltage at 23° C after pre-energizing

with nominal voltage without contact current

UII = Maximum continous voltage at 23°

The operating voltage limits UI and UII depend on

the temperature according to the formula:

UI tamb =K

I · UI 23° C

and

UII tamb =K

Il · UIl 23° C

tamb = Ambient temperature

UI tamb = Minimum voltage at ambient temperature, tamb

UII tamb = Maximum voltage at ambient temperature, tamb

kI, kII = Factors (dependent on temperature), see diagram

IM Relay

Contact Data

Number of contacts and type

Contact assembly

Contact material

Limiting continuous current at max. ambient temperature

Maximum switching current

Maximum swichting voltage

Maximum switching capacity

Thermoelectric potential

Initial contact resistance / measuring condition: 10 mA / 20 mV

Electrical endurance at contact application 0

(£ 30 mV / £ 10 mA)

cable load open end

Resistive load at 125Vdc / 0.24 A - 30 W

at 220 Vdc / 0.27 A - 60 W

at 250 Vac / 0.25 A - 62.5 VA

at 30 Vdc / 1 A - 30 W

at 30 Vdc / 2 A - 60 W

Mechanical endurance

UL/CSA ratings

2 changeover contacts

Bifurcated contacts

Palladium-ruthenium, gold-covered

2 A

220 Vdc

250 Vac

60 W, 62.5 VA

< 10 mV

< 50 mW

min. 2.5 x 106 operations

min. 2.0 x 106 operations

min. 5 x 105 operations

min. 1 x 105 operations

min. 5 x 105 operations

min. 1 x 105 operations

typ. 108 operations

30 Vdc / 2 A

220 Vdc / 0.27 A

120 Vdc / 0.5 A

250 Vac / 0.25 A

Capacitance

between coil and contacts

between adjacent contact sets

between open contacts

RF Characteristics

Isolation at 100 / 900 MHz

Insertion loss at 100 / 900 MHz

V.S.W.R. at 100 / 900 MHz

max. 2 pF

max. 1 pF

- 37.0 dB / - 18.8 dB

- 0.03 dB / - 0.33 dB

1.06 / 1.49

High Frequency Data

* High Dielectric Version „C“

Insulation

Insulation resistance at 500 VDC

Dielectric test voltage (1 min)

between coil and contacts

between adjacent contact sets

between open contacts

Surge voltage resistance

according to Bellcore TR-NWT-001089 (2 / 10 ms)

between coil and contacts

between adjacent contact sets

between open contacts

according to FCC 68 (10 / 160 ms)

between coil and contacts

between adjacent contact sets

between open contacts

> 109 W> 109 W

1800 Vrms 1800 Vrms

1000 Vrms 1800 Vrms

1000 Vrms 1500 Vrms

2500 V 2500 V

1500 V 2500 V

2500 V 2500 V

1500 V 2500 V

Standard Version High Dielectric Version

General data

Operate time at Unom typ. / max.

Reset time (latching) at Unom , typ. / max.

Release time without diode in parallel (non-latching), typ. / max.

Release time with diode in parallel (non-latching), typ. / max.

Bounce time at closing contact, typ. / max.

Maximum switching rate without load

Ambient temperature

Thermal resistance

Maximum permissible coil temperature

Vibration resistance (function)

Shock resistance, half sinus, 11 ms

half sinus, 0.5 ms

Degree of protection

Needle flame test

Mounting position

Processing information

Weight (mass)

Resistance to soldering heat

1 ms / 3 ms

1 ms /3 ms

1 ms / 3 ms

3 ms / 5 ms

1 ms / 5 ms

50 operations/s

-40° C ... +85° C

< 150 K/W

125° C

20 G

10 to 1000 Hz

50 G (function)

500 G (damage)

immersion cleanable, IP 67

application time 20 s, no burning and glowing

any

Ultrasonic cleaning is not recommended

max. 0.75 g

260° C / 10 s

IM Relay

All data refers to 23° C unless otherwise specified.

Recommended soldering conditions

Soldering conditions according CECC 00802

Vapor Phase Soldering: Temperature/Time Profile

(Lead Temperature)

Infrared Soldering: Temperature/Time Profile

(Lead Temperature)

Full line: typical

Dotted line: process limits

10 sec

ca. 40 sec

max. 245° C

215° C

130° C

180° C

Time (s)

215° C

180° C

130° C

100° C

external preheating

20 - 40 sec Full line: typical

Dotted line: process limits

forced

cooling

Time (s)

Temperature °C

IM Relay

Reel dimension

Tube for THT version - 50 relays per tube, 1000 relays per box

Tape and reel for SMT version - 1’000 relays / reel, 1’000 or 5’000 relays / box

Packing Dimensions in mm

IM Relay

IM00GR 3-1462037-7

IM00JR 3-1462037-9

IM00TS 3-1462037-5

IM00NS 1-1462038-0

IM01GR 0-1462037-1

IM01CGR 0-1462038-4

IM01JR 4-1462037-0

IM01TS 0-1462037-4

IM01NS 1-1462038-1

IM02GR 0-1462037-9

IM02CGR 0-1462038-1

IM02JR 1-1462037-1

IM02TS 1-1462037-3

IM02NS 1-1462038-2

IM03GR 1-1462037-4

IM03CGR 0-1462038-2

IM03JR 1-1462037-6

IM03TS 1-1462037-8

IM03NS 1-1462038-3

IM04GR 4-1462037-2

IM04JR 4-1462037-4

IM04TS 4-1462037-1

IM04NS 1-1462038-4

IM05GR 3-1462037-4

IM05CGR 0-1462038-3

IM05JR 4-1462037-5

IM05TS 2-1462037-2

IM05NS 1-1462038-5

IM06GR 2-1462037-3

IM06CGR 9-1462037-9

IM06JR 4-1462037-6

IM06TS 2-1462037-7

IM06NS 1-1462038-6

IM07GR 4-1462037-7

IM07JR 4-1462037-8

IM07TS 3-1462037-0

IM07NS 1-1462038-7

IM40GR 5-1462037-1

IM40JR 5-1462037-2

IM40TS 5-1462037-0

IM40NS 1-1462038-8

IM41GR 5-1462037-4

IM41JR 5-1462037-5

IM41TS 5-1462037-3

IM41NS 1-1462038-9

IM42GR 3-1462037-1

IM42JR 5-1462037-7

IM42TS 5-1462037-6

IM42NS 2-1462038-0

IM43GR 5-1462037-9

IM43JR 6-1462037-0

IM43TS 5-1462037-8

IM43NS 2-1462038-1

IM44GR 6-1462037-2

IM44JR 6-1462037-3

IM44TS 6-1462037-1

IM44NS 2-1462038-2

IM45GR 6-1462037-4

IM45JR 6-1462037-5

IM45TS 3-1462037-2

IM45NS 2-1462038-3

IM46GR 6-1462037-7

IM46JR 6-1462037-8

IM46TS 6-1462037-6

IM46NS 2-1462038-4

IM47GR 7-1462037-0

IM47JR 7-1462037-1

IM47TS 6-1462037-9

IM47NS 2-1462038-5

Relay Code Tyco

Part Number

Relay Code Tyco

Part Number

Ordering Information

IM Relays

4th generation slim line – low profile polarized 2 c/o telecom relay with

bifurcated contacts, available as non latching or latching relay with

1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption

of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is

available as through hole and surface mount type (J-Legs and Gull

Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric

strength fulfills the Bellcore requirements according GR 1089 (2,5 kV –

2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM is CECC/

IECQ approved and certified in accordance with IEC/EN 60950 and

UL1950. Dimensions approx. 10 x 6 mm board space and 5.65 mm

height.

P2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 or 2 coils. Nominal

voltage range from 3 ... 24 V, coil power consumption 140 mW,

latching relays with 1 coil 70 mW. The P2 relay is available as through

hole or surface mount type and capable to switch currents up to 5 A.

Dielectric strength fulfills the Bellcore requirements according GR

1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).

Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

FX Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 coil. Nominal voltage

range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the

high sensitive version, 140... 300 mW for the standard version,

latching relays with 1 coil 100 mW. The FX2 relay is available as

through hole type and capable to switch loads up to 60 W/62,5 VA.

Dielectric strength fulfills the Bellcore requirements according GR

1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The

FX2 is CECC/IECQ approved and certified in accordance with IEC/EN

60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space

and 10,7 mm height.

FT2 / FU2 Relays

3rd generation non polarized, non latching 2 c/o telecom relay with

bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power

consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as

through hole and surface mount type. Dielectric strength fulfills the

Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and

FCC part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ

approved and certified in accordance with IEC/EN 60950 and

UL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm

height.

FP2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 or 2 coils. Nominal

voltage range from 3 ... 48 V, coil power consumption of 80 ...

260 mW for the high sensitive version, 140... 300 mW for the

standard version, latching relays with 1 coil 100 mW.. The FP2 relay is

available as through hole type and capable to switch loads up to

30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /

160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.

14 x 9 mm board space and 5 mm height.

MT2 / MT4

2nd generation non polarized, non latching 2 c/o and 4 c/o telecom

and signal relay with bifurcated contacts. Nominal voltage range from

4.5 ... 48 V, coil power consumption 150/200/300/400 and

550 mW, and 300 mW (MT4). Dielectric strength fulfills the

requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both

and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)

the MT4 only.

Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,

MT4 approx. 20 x15 mm board space and 11 mm height.

D2n Relays

2nd generation non polarized 2 c/o relay for telecom and various other

applications. Nominal voltage range from 3 ... 48 V, coil power

consumption from 150 .... 500 mW. The D2n relay is capable to switch

currents up to 3 A. Dielectric strength fulfills the requirements

according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.

20 x10 mm board space and 11,5 mm height.

P1 Relays

Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a

wide range of applications, available as non latching or latching relay

with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power

consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay

is available as through hole or surface mount type and capable to

switch currents up to 1 A. Dielectric strength fulfills the requirements

according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.

13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for

SMT version.

W11 Relays

Low cost, non polarized 1 c/o relay for various applications. Nominal

voltage range from 3 ... 24 V, coil power consumption 450 mW,

sensitive versions 200 mW. The W11 relay is capable to switch

currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.

15,6 x 10,6 mm board space and 11,5 mm height.

Reed Relays

High sensitive, non polarized relay for telecom and various other

applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal

voltage range from 5 ... 24 V, coil power consumption 50...280 mW

for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays

are available in DIP or SIL housing and capable to switch currents up to

0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric

strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and

5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm

height for SIL version.

Cradle Relays

Extremely reliable and mature relay family of 1st generation for various

signal switching applications. Available as non polarized, polarized /

latching and relay with AC coil. The benefit is the possibility of

combining various contact sets from 1 up to 6 poles, single and

bifurcated contacts, different contact materials with a coil voltage

range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust

protected and hermetically sealed versions, with plug in or solder

terminals and are capable to switch currents up to 5 A. Forcibly guided

(linked) contact sets optional. Dielectric strength 500 Vrms.

Dimensions from approx. 19 x 24 to 19x35 mm board space and

30 mm height.

Other Relays

We offer a variety of different relay families for maintenance and

replacement purposes. These relays are up to 60 years old now, such

as Card Relay SN (V23030 / V23031 series), Small General Purpose

Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and

V23163 ... V23167 series). Accessories like sockets, hold down

springs, etc. optional.

IM Relay

Tyco Electronics AXICOM Ltd.

Seestrasse 295 - P.O. Box 220

CH-8804 Au-Wädenswil / Switzerland

Phone +41 1 782 9111

Fax +41 1 782 9080

E-mail: axicom@tycoelectronics.com

Tyco Electronics Corporation

POB 3608,

Harrisburg, PA 17105, USA

Phone +1 800-522-6752

Tyco Electronics EC Trutnov s.r.o.

Komenského 821

CZ-541 01 Trutnov / Czech Republic

E-mail: axicom@tycoelectronics.com

Tyco Electronics AMP GmbH

Paulsternstrasse 26

D-13629 Berlin / Germany

Phone +49 30 386 38260

Fax +49 30 386 38569

E-mail: axicom@tycoelectronics.com

April 2002 Rev. 3.01