panasonic.net/id/pidsx/global
2015.12
PM-25 SERIES
PM-65 SERIES
PM-45 SERIES
Ultimate U-shaped micro photoelectric sensors
One Step Ahead in Performance and Mounting Ease
Conforming to
EMC Directive
Certified
(Some models only)
Micro Photoelectric Sensor
PM-25
PM-45
PM-65
Amplier Built-in / U-shaped
SERIES
SERIES
SERIES
Ultra-small / Cable type
Compact / Cable type
Compact / Connector built-in type
Three protection circuits standard
on all models
Our original integrated molding method has
eliminated grooves and gaps on the sensing surface
and main body, thus reducing the possibility of
malfunctions caused by splashing water or dust.
Large and easy to see
Multi-angle operation indicator
Compact size
All new models require significantly less mounting space
than our conventional models when mounted with the
same pitch. What's more, the new models can directly
replace our conventional models currently in use.
[Look!]
All models easy to
mount with M3 screws
The large operation indicator (orange) lights up when
the beam enters. The indicator is easy to see from
above and from the sides.
Ample beam emitting / receiving
distance of 6 mm 0.236 in
The beam emitting and receiving sections are 0.5 mm 0.02 in thinner than
those on our conventional models while their external dimensions are the
same. As a result, the distance between the beam emitting point and
receiving point increased by 1 mm 0.039 in. The wider distance means
less possibility of collision between the sensing section and sensing object.
Beam marks for easy adjustment
■ Positioning of a pallet
■ Sensing the starting point and
overrun of a moving body
■ Sensing the starting point on a
rotating body
The upper-limit and lower-limit positions of beam can be visually
confirmed from the front, back, right and left sides of the sensor unit.
This allows easy adjustment of the position of sensing object.
All models are standardly equipped with the following
protection circuits in their compact bodies. These protection
circuits minimize the possibility of sensor malfunctions
caused by erroneous wiring.
1
2
3
Reverse supply polarity protection circuit
Reverse output polarity protection circuit
Output short-circuit protection circuit
6 mm 0.236 in
The starting
point can be
sensed by
making a slit in
the rotating
body.
Starting
point
Starting point sensing
Overrun sensing
Overrun
sensing
Dog
PM-25 SERIES Easy mounting with M2 / M3 screws!
■Ultra-small / Cable type
PM-65 SERIES Easy connection with a single touch using commercially-available connectors
■Compact / Connector
built-in type
PM-45 SERIES Compact size!
■Compact / Cable type
Beam width
Lower-limit position
of beam axis
Upper-limit position
of beam axis
Industry’s First* and Industry’s Top-in-Class*
Translate to the Most
Advanced Sensors in the Industry.
PM-25 SERIES PM- 45 SERIES
Industry’s first!
IP64 rating
PM-25 SERIES PM- 45 SERIES
PM-65 SERIES
* As of November 2015, according to our company’s survey
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
PM-45 SERIES
Industry’s
top-in-class
*
Industry’s
top-in-class
*
The sensor unit can be installed with one or
two M3 screws.
* M3 screws and washers are not included.
Resistant to vibrations
and impacts
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
The sections where stress
concentrates, such as the
connecting section of the
cable and internal circuit, are
covered with a resin. This
helps prevent malfunctions
caused by vibrations and
impacts.
■ Models requiring one M3 screw for installation
PM-F25, PM-R25, PM-F65, PM-R65
■
Models requiring two M3 screws for installation
Models other than above
Sensors come in various shapes to suit a wide range of mounting conditions
PM-K25 PM-L25 PM-U25 PM-F25 PM-R25
PM-K45 PM-T45 PM-L45 PM-Y45 PM-F45 PM-R45
PM-K65 PM-T65 PM-T65W PM-L65 PM-Y65 PM-F65 PM-F65W PM-R65 PM-R65W
APPLICATIONS
Starting point and overrun is
sensed using the dog* on the base.
* “Dog” refers to the sensing object for activating the sensor’s
detecting operation.
Beam width marks are provided on
PM25 series and PM45 series.
Pallet is stopped by sensing the dog*.
13.4 0.528
6 0.236
3.7 0.146
(Unit: mm in)
No ridges on
sensing surface
No joint seam
10
0.394
14.6 0.575
26 1.024
15.5 0.610
18.5 0.728
26 1.024
Conventional
model
(L type)
PM-L45
(Unit: mm in)Resin-filled structure
(cross-sectional view)
< Front / back > < Right / left >
Industry’s first
*
Industry’s first
*
Industry’s first
*
Industry’s first
*
2
Three protection circuits standard
on all models
Our original integrated molding method has
eliminated grooves and gaps on the sensing surface
and main body, thus reducing the possibility of
malfunctions caused by splashing water or dust.
Large and easy to see
Multi-angle operation indicator
Compact size
All new models require significantly less mounting space
than our conventional models when mounted with the
same pitch. What's more, the new models can directly
replace our conventional models currently in use.
[Look!]
All models easy to
mount with M3 screws
The large operation indicator (orange) lights up when
the beam enters. The indicator is easy to see from
above and from the sides.
Ample beam emitting / receiving
distance of 6 mm 0.236 in
The beam emitting and receiving sections are 0.5 mm 0.02 in thinner than
those on our conventional models while their external dimensions are the
same. As a result, the distance between the beam emitting point and
receiving point increased by 1 mm 0.039 in. The wider distance means
less possibility of collision between the sensing section and sensing object.
Beam marks for easy adjustment
■ Positioning of a pallet
■ Sensing the starting point and
overrun of a moving body
■ Sensing the starting point on a
rotating body
The upper-limit and lower-limit positions of beam can be visually
confirmed from the front, back, right and left sides of the sensor unit.
This allows easy adjustment of the position of sensing object.
All models are standardly equipped with the following
protection circuits in their compact bodies. These protection
circuits minimize the possibility of sensor malfunctions
caused by erroneous wiring.
1
2
3
Reverse supply polarity protection circuit
Reverse output polarity protection circuit
Output short-circuit protection circuit
6 mm 0.236 in
The starting
point can be
sensed by
making a slit in
the rotating
body.
Starting
point
Starting point sensing
Overrun sensing
Overrun
sensing
Dog
PM-25 SERIES Easy mounting with M2 / M3 screws!
■Ultra-small / Cable type
PM-65 SERIES Easy connection with a single touch using commercially-available connectors
■Compact / Connector
built-in type
PM-45 SERIES Compact size!
■Compact / Cable type
Beam width
Lower-limit position
of beam axis
Upper-limit position
of beam axis
Industry’s First* and Industry’s Top-in-Class* Translate to the Most
Advanced Sensors in the Industry.
PM-25 SERIES PM- 45 SERIES
Industry’s first!
IP64 rating
PM-25 SERIES PM- 45 SERIES
PM-65 SERIES
* As of November 2015, according to our company’s survey
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
PM-45 SERIES
Industry’s
top-in-class
*
Industry’s
top-in-class
*
The sensor unit can be installed with one or
two M3 screws.
* M3 screws and washers are not included.
Resistant to vibrations
and impacts
PM-25 SERIES PM- 45 SERIES PM-65 SERIES
The sections where stress
concentrates, such as the
connecting section of the
cable and internal circuit, are
covered with a resin. This
helps prevent malfunctions
caused by vibrations and
impacts.
■ Models requiring one M3 screw for installation
PM-F25, PM-R25, PM-F65, PM-R65
■
Models requiring two M3 screws for installation
Models other than above
Sensors come in various shapes to suit a wide range of mounting conditions
PM-K25 PM-L25 PM-U25 PM-F25 PM-R25
PM-K45 PM-T45 PM-L45 PM-Y45 PM-F45 PM-R45
PM-K65 PM-T65 PM-T65W PM-L65 PM-Y65 PM-F65 PM-F65W PM-R65 PM-R65W
APPLICATIONS
Starting point and overrun is
sensed using the dog* on the base.
* “Dog” refers to the sensing object for activating the sensor’s
detecting operation.
Beam width marks are provided on
PM25 series and PM45 series.
Pallet is stopped by sensing the dog*.
13.4 0.528
6 0.236
3.7 0.146
(Unit: mm in)
No ridges on
sensing surface
No joint seam
10
0.394
14.6 0.575
26 1.024
15.5 0.610
18.5 0.728
26 1.024
Conventional
model
(L type)
PM-L45
(Unit: mm in)Resin-filled structure
(cross-sectional view)
< Front / back > < Right / left >
Industry’s first
*
Industry’s first
*
Industry’s first
*
Industry’s first
*
3
4
PM-25
ORDER GUIDE
Type Appearance (mm in) Sensing range Model No. Cable length Output Output operation
Ultra-small / Cable type
K type
6 0.236
23.9
0.941
12.3
0.484
6 mm 0.236 in
(xed)
PM-K25 1 m 3.281 ft
NPN open-collector
transistor
Incorporated with 2 outputs:
Light-ON / Dark-ON
PM-K25-R 1 m 3.281 ft,
bending-resistant cable
PM-K25-C3 3 m 9.843 ft
PM-K25-P 1 m 3.281 ft PNP open-collector
transistor
L type
13.4
0.528
12 0.472
12
0.472
PM-L25 1 m 3.281 ft
NPN open-collector
transistor
PM-L25-R 1 m 3.281 ft,
bending-resistant cable
PM-L25-C3 3 m 9.843 ft
PM-L25-P 1 m 3.281 ft PNP open-collector
transistor
U type
6 0.236
16
0.630
13.4
0.528
PM-U25 1 m 3.281 ft
NPN open-collector
transistor
PM-U25-R 1 m 3.281 ft,
bending-resistant cable
PM-U25-C3 3 m 9.843 ft
PM-U25-P 1 m 3.281 ft PNP open-collector
transistor
F type
11.7 0.461
12.5
0.492
13.4
0.528
PM-F25 1 m 3.281 ft
NPN open-collector
transistor
PM-F25-R 1 m 3.281 ft,
bending-resistant cable
PM-F25-C3 3 m 9.843 ft
PM-F25-P 1 m 3.281 ft PNP open-collector
transistor
R type
11.7 0.461
12.5
0.492
13.4
0.528
PM-R25 1 m 3.281 ft
NPN open-collector
transistor
PM-R25-R 1 m 3.281 ft,
bending-resistant cable
PM-R25-C3 3 m 9.843 ft
PM-R25-P 1 m 3.281 ft PNP open-collector
transistor
Note:
The sufx “-R” in the model No. indicates a bending-resistant cable type. The sufx “-C3” indicates a 3 m 9.843 ft cable length type.
M2 (length 10 mm 0.394 in)
screw with a spring washer
OPTIONS
Designation Model No. Description
Mounting screw MS-M2
Mounting screw with washers for the ultra-small type sensor
(50 pcs. lot). It can mount securely as it is spring washer
attached.
Mounting screw
•MS-M2
Ultra-small / Cable type PM-25 SERIES
1 m 3.281 ft
cable
3 m 9.843 ft
cable
1 m 3.281 ft bending-
resistant cable
1 m 3.281 ft
cable
3 m 9.843 ft
cable
1 m 3.281 ft bending-
resistant cable
Built-in connector
Cable type
NPN output
PNP output
PM-K25 PM-L25 PM-U25 PM-F25 PM-R25
Easy mounting with
M2 / M3 screws!
Compact size!
Easy connection with a single touch
using commercially-available connectors
5
PM-25
SPECIFICATIONS
Type Ultra-small / Cable type
Bending-resistant cable 3 m 9.843 ft cable
Model No.
NPN output PM-□25 PM-□25-R PM-□25-C3
Item PNP output PM-□25-P
― ―
Sensing range 6 mm 0.236 in (xed)
Minimum sensing object 0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis 0.05 mm 0.002 in or less
Repeatability 0.01 mm 0.0004 in or less
Supply voltage 5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 15 mA or less
Output
<NPN output type>
NPN open-collector transistor
•Maximum sink current: 50 mA
•Applied voltage: 30 V DC or less (between output and 0 V)
•Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
•Maximum source current: 50 mA
•Applied voltage: 30 V DC or less (between output and + V)
•Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
Output operation Incorporated with 2 outputs: Light-ON / Dark-ON
Short-circuit protection Incorporated
Response time
Under light received condition: 20 μs or less
Under light interrupted condition: 80 μs or less
(Maximum response frequency: 3 kHz) (Note 2)
Operation indicator Orange LED (lights up under light received condition)
Pollution degree 3
Environmental resistance
Protection IP64 (IEC)
Ambient temperature
(Note 3, 4) –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s
2
) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material Enclosure: PBT, Display section: Polycarbonate
Cable 0.09-mm2 4-core cabtyre cable, PVC,
1 m 3.281 ft long
0.1-mm2 4-core bending-resistant cabtyre
cable, PVC, 1 m 3.281 ft long (Note 5, 6)
0.09-mm2 4-core cabtyre cable, PVC,
3 m 9.843 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 7)
Weight Net weight: 10 g approx., Gross weight: 15 g approx. Net weight: 30 g approx.,
Gross weight: 35 g approx.
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the gure below, is rotated.
Disc
Disc 1.8 mm 0.071 in
1.6 mm 0.063 in
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
3) In case the PM-25 series is used at an ambient temperature of +50 °C +122 °F, or more, make sure to mount it on a metal body.
4) Note that the cable of PM-□25-R loses its exibility when the ambient temperature decreases to about -10 °C +14 F°.
5) The cable of PM-□25-R is a bending-resistant cable usable on a moving base. When the sensor is mounted on a moving base, secure the sensor cable
joint at the unit in place so that stress is not applied to it.
6) When storing PM-□25-R, make sure that the cable does not come into contact with the sensing section or operation indicator.
7) If the cable is extended to 20 m 65.617 ft or longer, conrm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
6
PM-45
ORDER GUIDE
Type Appearance (mm in) Sensing range Model No. Cable length Output Output operation
Compact / Cable type
K type
21.3
0.839
7 0.276
25.4
1.000
6 mm 0.236 in
(xed)
PM-K45 1 m 3.281 ft NPN open-collector
transistor
Incorporated with 2 outputs:
Light-ON / Dark-ON
PM-K45-C3 3 m 9.843 ft
PM-K45-P 1 m 3.281 ft PNP open-collector
transistor
PM-K45-P-C3 3 m 9.843 ft
T type
13.7 0.539
18.1
0.713
26
1.024
PM-T45 1 m 3.281 ft NPN open-collector
transistor
PM-T45-C3 3 m 9.843 ft
PM-T45-P 1 m 3.281 ft PNP open-collector
transistor
PM-T45-P-C3 3 m 9.843 ft
L type
7 0.276
14.6 0.575
26
1.024
PM-L45 1 m 3.281 ft NPN open-collector
transistor
PM-L45-C3 3 m 9.843 ft
PM-L45-P 1 m 3.281 ft PNP open-collector
transistor
PM-L45-P-C3 3 m 9.843 ft
Y type
20.6
0.811
14.6 0.575
13.4
0.528
PM-Y45 1 m 3.281 ft NPN open-collector
transistor
PM-Y45-C3 3 m 9.843 ft
PM-Y45-P 1 m 3.281 ft PNP open-collector
transistor
PM-Y45-P-C3 3 m 9.843 ft
F type
13 0.512
21.3
0.839
13.7
0.539
PM-F45 1 m 3.281 ft NPN open-collector
transistor
PM-F45-C3 3 m 9.843 ft
PM-F45-P 1 m 3.281 ft PNP open-collector
transistor
PM-F45-P-C3 3 m 9.843 ft
R type
13.7
0.539
13 0.512
21.3
0.839
PM-R45 1 m 3.281 ft NPN open-collector
transistor
PM-R45-C3 3 m 9.843 ft
PM-R45-P 1 m 3.281 ft PNP open-collector
transistor
PM-R45-P-C3 3 m 9.843 ft
Note: The sufx “-C3” in the model No. indicates a 3 m 9.843 ft cable length type.
Compact / Cable type PM-45 SERIES
1 m 3.281 ft
cable
3 m 9.843 ft
cable
1 m 3.281 ft bending-
resistant cable
1 m 3.281 ft
cable
3 m 9.843 ft
cable
1 m 3.281 ft bending-
resistant cable
Built-in connector
Cable type
NPN output
PNP output
PM-K45 PM-T45 PM-L45 PM-Y45 PM-F45 PM-R45
Easy mounting with
M2 / M3 screws!
Compact size!
Easy connection with a single touch
using commercially-available connectors
7
PM-45
SPECIFICATIONS
Type Compact / Cable type
3 m 9.843 ft cable
Model No.
NPN output PM-□45 PM-□45-C3
Item PNP output PM-□45-P PM-□45-P-C3
Sensing range 6 mm 0.236 in (xed)
Minimum sensing object 0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis 0.05 mm 0.002 in or less
Repeatability 0.01 mm 0.0004 in or less
Supply voltage 5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 15 mA or less
Output
<NPN output type>
NPN open-collector transistor
•Maximum sink current: 50 mA
•Applied voltage: 30 V DC or less (between output and 0 V)
•Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
•Maximum source current: 50 mA
•Applied voltage: 30 V DC or less (between output and + V)
•Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
Output operation Incorporated with 2 outputs: Light-ON / Dark-ON
Short-circuit protection Incorporated
Response time
Under light received condition: 20 μs or less
Under light interrupted condition: 80 μs or less
(Maximum response frequency: 3 kHz) (Note 2)
Operation indicator Orange LED (lights up under light received condition)
Pollution degree 3
Environmental resistance
Protection IP64 (IEC)
Ambient temperature –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s
2
) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material Enclosure: PBT, Display section: Polycarbonate
Cable 0.09-mm2 4-core cabtyre cable, PVC, 1 m 3.281 ft long 0.09-mm2 4-core cabtyre cable, PVC, 3 m 9.843 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 3)
Weight Net weight: 10 g approx., Gross weight: 15 g approx. Net weight: 30 g approx., Gross weight: 35 g approx.
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the gure below, is rotated.
3) If the cable is extended to 20 m 65.617 ft or longer, conrm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
Disc
Disc 1.8 mm 0.071 in
1.6 mm 0.063 in
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
8
PM-65
ORDER GUIDE
Type Appearance (mm in) Sensing range Model No. Output Output operation
Compact / Connector built-in type
K type
26
1.024
22.4
0.882
7 0.276
6 mm 0.236 in (xed)
PM-K65 NPN open-collector
transistor
Incorporated with 2 outputs:
Light-ON / Dark-ON
PM-K65-P PNP open-collector
transistor
T type
22.4
0.882
26
1.024
13.7 0.539
PM-T65 NPN open-collector
transistor
PM-T65-P PNP open-collector
transistor
16.7 0.657
22.4
0.882
26
1.024
PM-T65W NPN open-collector
transistor
PM-T65W-P PNP open-collector
transistor
L type
26.2
1.031 15.7
0.618
14.9 0.587
PM-L65 NPN open-collector
transistor
PM-L65-P PNP open-collector
transistor
Y type
14.9 0.587
22.7
0.894
13.4
0.528
PM-Y65 NPN open-collector
transistor
PM-Y65-P PNP open-collector
transistor
F type
13.5 0.531
22.4
0.882
13.4
0.528
PM-F65 NPN open-collector
transistor
PM-F65-P PNP open-collector
transistor
13 0.512
13.4
0.528
22.4
0.882
PM-F65W NPN open-collector
transistor
PM-F65W-P PNP open-collector
transistor
R type
22.4
0.882
13.5 0.531
13.4
0.528
PM-R65 NPN open-collector
transistor
PM-R65-P PNP open-collector
transistor
13 0.512
22.4
0.882
13.4
0.528
PM-R65W NPN open-collector
transistor
PM-R65W-P PNP open-collector
transistor
Note: “W” in the model No. indicates that the product is mounting-compatible with our conventional models [PM-T53(B) / PM-□64(P)].
Compact / Connector built-in type PM-65 SERIES
Cable type
NPN output
PNP output
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Built-in connector
PM-K65 PM-T65 PM-T65W PM-L65 PM-Y65 PM-F65 PM-F65W PM-R65 PM-R65W
Easy mounting with
M2 / M3 screws!
Compact size!
Easy connection with a single touch
using commercially-available connectors
9
PM-65
Designation Model No. Description
Connector
attached cable
CN-14A-C1 Length: 1m 3.281 ft
0.2 mm2 4-core cabtyre cable with
connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
CN-14A-C2 Length: 2m 6.562 ft
CN-14A-C3 Length: 3m 9.843 ft
CN-14A-C5 Length: 5m 16.404 ft
Connector
attached cable
Bending-
resistant cable
CN-14A-R-C1 Length: 1m 3.281 ft
0.2 mm2 4-core cabtyre cable with
connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
CN-14A-R-C2 Length: 2m 6.562 ft
CN-14A-R-C3 Length: 3m 9.843 ft
CN-14A-R-C5 Length: 5m 16.404 ft
Connector CN-14A Set of 10 housings and 40 contacts
• CN-14A(-R)-C□
Connector attached cable
•CN-14A
Connector
Housing
Contact
4
OPTIONS
Disc
Disc 1.8 mm 0.071 in
1.6 mm 0.063 in
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
Notes: 1) Where measurement conditions have not been specied precisely, the
conditions used were an ambient temperature of +23 °C +73.4 °F.
2)
Mounting-compatible with our conventional models [PM-T53(B) / PM-□64(P)]
3) The response frequency is the value when the disc, given in the gure
below, is rotated.
4) If the cable is extended to 20 m 65.617 ft or longer, conrm that the supply
voltage at the end of the cable attached to the sensor is 4.5 V or higher.
Type Compact / Connector built-in type
Mounting-compatible with conventional model (Note 2)
Model No.
NPN output PM-□65 PM-□65W
Item PNP output PM-□65-P PM-□65W-P
Sensing range 6 mm 0.236 in (xed)
Minimum sensing object 0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis 0.05 mm 0.002 in or less
Repeatability 0.01 mm 0.0004 in or less
Supply voltage 5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 15 mA or less
Output
<NPN output type>
NPN open-collector transistor
•Maximum sink current: 50 mA
•Applied voltage: 30 V DC or less (between output and 0 V)
•Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
•Maximum source current: 50 mA
•Applied voltage: 30 V DC or less (between output and + V)
•Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
Output operation Incorporated with 2 outputs: Light-ON / Dark-ON
Short-circuit protection Incorporated
Response time
Under light received condition: 20 μs or less, Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz) (Note 3)
Operation indicator Orange LED (lights up under light received condition)
Pollution degree 3
Environmental resistance
Protection IP40 (IEC)
Ambient temperature –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s
2
) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material Enclosure: PBT, Display section: Polycarbonate
Cable length Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 4)
Weight Net weight: 3 g approx., Gross weight: 3 g approx.
SPECIFICATIONS
Recommended connector
Contact: SPHD-001T-P0.5, Housing: PAP-04V-S
(Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
Recommended crimping tool
Model No. : YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
10
PM-25 PM-45 PM-65
I/O CIRCUIT AND WIRING DIAGRAMS
I/O circuit diagram
Users’ circuitInternal circuit
Color of cable type lead wire or color of
lead wire of connector attached cable
50 mA max.
50 mA max.
Load
Load
(Brown) +V
(Black) Output 1
(Note)
(White) Output 2 (Note)
(Blue) 0 V
Sensor circuit
5 to 24 V DC
±10 %
+
–
ZD1
D
Tr1
ZD2
Tr2
Note: Ensure to insulate the unused output wire.
Note: Ensure to insulate the unused output wire.
Symbols… D: Reverse supply polarity protection diode
ZD1, ZD2: Surge absorption zener diode
Tr1, Tr2: NPN output transistor
Symbols… D: Reverse supply polarity protection diode
ZD1, ZD2: Surge absorption zener diode
Tr1, Tr2: PNP output transistor
Terminal arrangement diagram (PM-65 series)
1 2 3 4
Terminal No. Designation
1+V
2Output 1: Light-ON
3Output 2: Dark-ON
40 V
Terminal arrangement diagram (PM-65 series)
1 2 3 4
Terminal No. Designation
1+V
2Output 1: Light-ON
3Output 2: Dark-ON
40 V
NPN output type
Users’ circuitInternal circuit
Color of cable type lead wire or color of
lead wire of connector attached cable
50 mA max.
50 mA max.
Tr1
Load
Load
(Brown) +V
(Blue) 0 V
Sensor circuit
ZD2
Tr25 to 24 V DC
±10 %
+
–
(Black) Output 1 (Note)
D
(White) Output 2 (Note)
ZD1
Note: Ensure to insulate the unused output wire.
Note: Ensure to insulate the unused output wire.
Wiring diagram (PM-25 series / PM-45 series)
Brown
Black (Note)
White (Note)
Blue
Load
Load
5 to 24 V DC
±10 %
+
–
Output operation
Color code Output operation
Output 1 Black Light-ON
Output 2 White Dark-ON
Output operation
Color code Output operation
Output 1 Black Light-ON
Output 2 White Dark-ON
I/O circuit diagram
PNP output type
Wiring diagram (PM-25 series / PM-45 series)
Brown
Black (Note)
White (Note)
Blue
Load
Load
5 to 24 V DC
±10 %
+
–
11
SENSING CHARACTERISTICS (TYPICAL)
Sensing position
Sensing position
Sensing position
Operating point ℓ (mm in)
01
0.039
2
0.079
3
0.118
4
0.157
Light-
ON
Dark-
ON
2 mm
0.079 in
5.5 mm
0.217 in
Beam
axis
ℓ
Operating point ℓ (mm in)
1
0.039
2
0.079
3
0.118
4
0.157
0
Light-
ON
Dark-
ON
8.4 mm
0.331 in
Beam
axis
2 mm
0.079 in
ℓ
Operating point ℓ (mm in)
0
Light-
ON
Dark-
ON
1
0.039
2
0.079
3
0.118
4
0.157
ℓ
6 mm
0.236 in
Operating point ℓ (mm in)
0
Light-
ON
Dark-
ON
1
0.039
2
0.079
3
0.118
4
0.157
ℓ
7 mm
0.276 in
PM-25 series PM-45 series
Operating point ℓ (mm in)
0
Light-
ON
Dark-
ON
1
0.039
2
0.079
3
0.118
4
0.157
2 mm
0.079 in
8.4 mm
0.331 in
Beam
axis
ℓ
Operating point ℓ (mm in)
0
Light-
ON
Dark-
ON
1
0.039
2
0.079
3
0.118
4
0.157
ℓ
7 mm
0.276 in
PM-65 series
PM-25 PM-45 PM-65
•Never use this product as a sensing device
for personnel protection.
•In case of using sensing devices for
personnel protection, use products which
meet laws and standards, such as OSHA,
ANSI or IEC etc., for personnel protection
applicable in each region or country.
Mounting
PRECAUTIONS FOR PROPER USE
•The following conditions must be observed when using
screws to mount the sensor unit.
PM-45 series
Screw Spring washer Flat washer Tightening torque
M3 screw 1 pc. ø6 mm ø0.236 in
(small round washer) 0.5 N·m
Spring washer
M3 screws
Plain washer
Outer diameter
ø6 mm ø0.236 in
Spring washer
M3 screws
Plain washer
Outer diameter
ø6 mm ø0.236 in
Screw Spring washer Flat washer Tightening torque
M3 screw 1 pc. ø6 mm ø0.236 in
(small round washer) 0.5 N·m
•The following conditions must be observed when using
screws to mount the sensor unit.
PM-65 series
•The following conditions must be observed when using
screws to mount the sensor unit.
Spring washer
Plain washer
M2 screws
Outer diameter
ø4.3 mm ø0.169 in
Screw Spring washer Flat washer Tightening torque
M2 screw 1 pc. ø4.3 mm ø0.169 in
(small round washer) 0.15 N·m
M3 screw 1 pc. ø6 mm ø0.236 in
(small round washer) 0.5 N·m
Spring washer
M3 screws
Plain washer
Outer diameter
ø6 mm ø0.236 in
When using the optional mounting screw set MS-M2, a
spring washer is included.
•In case the PM-25 series is used at an ambient
temperature of +50 °C +122 °F, or more, make sure to
mount it on a metal body.
< When using M2 screws for mounting > < When using M3 screws for mounting >
PM-25 series
12
PM-25 PM-45 PM-65
PRECAUTIONS FOR PROPER USE
When using the product as an S-mark compatible
product in Korea
•The power supply cable and output cable connected to the
product must be less than 10 m 32.808 ft.
Cable extension
•Cable extension is possible up to an overall length
of 100 m 328.084 ft with a 0.3 mm
2
, or more, cable.
However, since a voltage drop shall occur due to the cable
extension, ensure that the power supply voltage at the
end of the cable attached to the sensor is within the rating.
•Cable extension is possible up to an overall length
of 100 m 328.084 ft with a 0.3 mm2, or more, cable.
However, since a voltage drop shall occur due to the
cable extension, ensure that the power supply voltage at
the end of the connector attached cable of the sensor or
at the sensor terminals is within the rating.
5 to 24 V DC
±10 %
Total cable length 100 m 328.084 ft
Supply voltage: 4.5 V or more
Cable attached
to sensor
+V
Output
0 V
Extension cable
+
–
PM-65 series
PM-25 series / PM-45 series
Connector
attached cableExtension cable
Output
5 to 24 V DC
±10 %
0 V
+V
Total cable length 100 m 328.084 ft
Supply voltage: 4.5 V or more
+
–
But, when the overall cable length, including the cable
attached to the sensor, is as given below, there is no
need to conrm the voltage.
Conductor crosssection
area of extension cable Total cable length
0.08 to 0.1 mm2Up to 5 m 16.404 ft
0.2 mm2Up to 10 m 32.808 ft
0.3 mm2Up to 20 m 65.617 ft
But, when the overall cable length, including the cable
attached to the sensor, is as given below, there is no
need to conrm the voltage.
Conductor crosssection
area of extension cable Total cable length
0.08 to 0.1 mm2Up to 5 m 16.404 ft
0.2 mm2Up to 10 m 32.808 ft
0.3 mm2Up to 20 m 65.617 ft
Wiring (PM-65 series)
Connection method
•Insert the connector attached cable CN‑14A‑C□ /
CN‑14A‑R‑C□ in the connector part of this product as
shown in the gure below.
<Connector>
Housing: PAP-04V-S
(Manufactured by J.S.T. Mfg. Co., Ltd.)
CN-14A-C□ / CN-14A-R-C□
Lock release lever
<Connector pin position>
Connector pin No.
Terminal designation
+V 0 V
Output 1Output 2
Disconnection method
•Press and hold the lock release lever to disconnect the
cable connector.
Note: Pulling the cable without pressing the lock release lever in an attempt
to disconnect the connector can cause wire breakage in the cable or
damage to the connector.
Other
•This device has been developed / produced for industrial
use only.
•Since the sensor is intended for
use inside machines, no special
countermeasures have been taken
against extraneous light. Take care
that extraneous light is not directly
incident on the beam receiving section.
•Do not use during the initial transient time (50 ms) after
the power supply is switched on.
•Note that the cable of PM‑□25‑R loses its exibility when
the ambient temperature decreases to about -10 °C +14 °F.
•The cable of PM‑□25‑R is a bending-resistant cable
usable on a moving base. When the sensor is mounted
on a moving base, secure the sensor cable joint at the
unit in place so that stress is not applied to it.
•When storing PM‑□25‑R, make sure that the cable
does not come into contact with the sensing section or
operation indicator.
•If the sensor is used in a place having excessive dust,
periodically clean the emitting and receiving sections with
a dry, soft cloth.
•If there is a large surge generating equipment, such as,
motor, solenoid, electromagnetic valve, etc., in the vicinity
of the sensor, use a surge absorber on that equipment.
Further, do not run the sensor cables along power lines
and use a capacitor between +V and 0 V, if required.
Use the sensor after conrming that the surge has been
eliminated.
13
PM-25 PM-45 PM-65
PM-U25□
PM-R25□
PM-L25□
PM-K25□
Beam
axis
Beam
axis
13.4
0.528
6
0.236
5.5
0.217
12.3
0.484
1.7
0.067
18.7
0.736
23.9
0.941
6
0.236
3 0.118
6
0.236
ø2.5 ø0.098 cable, 1 m 3.281 ft long
2-ø3.2 ø0.126
mounting holes
8 0.315
5 0.197
Operation indicator (Orange)
Operation indicator
(Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
2 0.079
ø6
ø0.236
PM-K25(-P)
Beam
axis
Beam
axis
13.4
0.528
6
0.236
8
0.315
ø2.5 ø0.098 cable,
1 m 3.281 ft long
2-ø3.2 ø0.126
mounting holes
Beam size:
1.2 × 0.8 0.047 × 0.031
Operation indicator (Orange)
Operation indicator (Orange)
6
0.236
3 0.118
16
0.630
5.5
0.217
11.5
0.453
2 0.079
PM-U25(-P)
Beam
axis
Beam
axis
3
0.118
11.7
0.461
6
0.236
6.2
0.244
4
0.157
6.7
0.264
ø4.8
ø0.189
Operation indicator
(Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
1.6 0.063 1.95 0.077
ø2
ø0.079
ø2.5 ø0.098 cable,
1 m 3.281 ft long
13.4
0.528
1.5
0.059
Operation indicator
(Orange)
Elongated
mounting hole
6
0.236
2 0.079
5.5
0.217 12.5
0.492
12
0.472
8 0.315
(2 0.079)
5 3.2
R1.6
R0.063
PM-R25(-P)
Beam
axis
Beam
axis
13.4
0.528
6
0.236
2
0.079
12
0.472
3
0.118
6
0.236
1.6
0.063
1.75
0.069
3.2
0.126
6
0.236
8
0.315
ø2.5 ø0.098 cable, 1 m 3.281 ft long
Operation indicator (Orange)
Operation indicator (Orange)
2–elongated mounting holes
12
0.472
10
0.394
4 0.157
5.5
0.217
Beam size:
1.2 × 0.8 0.047 × 0.031
2
0.079
PM-L25(-P)
Beam
axis
Beam
axis
3
0.118
11.7
0.461
5
0.197
6
0.236
(2 0.079)
6.2
0.244
6
0.236
4
0.157
6.7
0.264
ø4.8
ø0.189
Operation indicator (Orange)
1.6
0.063
1.95 0.077
3.2 0.126
ø2
ø0.079
ø2.5 ø0.098 cable,
1 m 3.281 ft long
8 0.315
12.5
0.492
12
0.472
13.4
0.528
1.5 0.059
2
0.079
Operation indicator
(Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
5.5
0.217
Elongated
mounting hole
R1.6
R0.063
PM-F25(-P)
DIMENSIONS (Unit: mm in)The CAD data can be downloaded from our website.
PM-F25□
Sensor
Sensor
Sensor
Sensor
Sensor
14
PM-25 PM-45 PM-65
PM-L45□
PM-F45□PM-R45□
PM-T45□
PM-K45□
Beam
axis
PM-K45
13.4
0.528
25.4
1.000
6
0.236
ø2.5 ø0.098 cable,
1 m 3.281 ft long
2-ø3.8 ø0.150
mounting holes
2-ø3.2 ø0.126
mounting holes
5.5
0.217
13.8
0.543
3.5
0.138
21.3
0.839
8.4 0.331
11 0.433
6
0.236
19
0.748
Operation indicator (Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
19
0.748
7
0.276
17.2
0.677
Operation indicator
(Orange)
2
0.079
Beam
axis
PM-L45
6
0.236
13.4
0.528
26 1.024
6
0.236
4
0.157
2-ø3.2 ø0.126
mounting holes
19 0.748
ø2.5 ø0.098 cable,
1 m 3.281 ft long
4.5
0.177
12.6
0.496
9
0.354
14.6
0.575
8.4 0.331
7.2 0.283
3.2 0.126
10
0.394
7 0.276
Operation indicator (Orange)
Operation indicator (Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
19 0.748
2 0.079
2–elongated mounting holes
3.5 0.138
2
0.079
Beam
axis
PM-F45
6
0.236
13.4
0.528 6 0.236
7
0.276
13
0.512
2-ø3.5 ø0.138
mounting holes
13.7
0.539
2.5 0.098
17.2
0.677 21.3
0.839
9 0.354
7
0.276
15.2
0.598
Operation indicator (Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
13.6
0.535
8.4 0.331
Operation indicator
(Orange)
ø2.5 ø0.098 cable,
1 m 3.281 ft long
2
0.079
Beam
axis
PM-R45
6
13.4
6 0.236
7
0.276
13
0.512
2-ø3.5 ø0.138
mounting holes
13.7
2.5 0.098
15.2
0.598
7
0.276
9 0.354
17.2
0.677
21.3
0.839
Operation indicator
(Orange)
Operation indicator
(Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
13.6
0.535
8.4 0.331
ø2.5 ø0.098 cable,
1 m 3.281 ft long
2
0.079
Beam
axis
PM-T45
13.4
0.528
13.7
0.539
6
0.236
19 0.748
26 1.024
2.5
0.098
ø2.5 ø0.098 cable,
1 m 3.281 ft long
15.2
0.598
3.2 0.126
18.1
0.713
13
0.512
6.2
0.244
2–elongated
mounting holes
17.2
0.677
(R)
Operation indicator (Orange)
Operation indicator
(Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
4.3
0.169
8.4 0.331
2
0.079
Beam
axis
PM-Y45
2-ø3.5 ø0.138 mounting holes
6
0.236
13.4
0.528
7
0.276
2.5
0.098
4.5
0.177
12.6
0.496
20.6
0.811
7.5 0.295
6
0.236
7 0.276
Operation indicator (Orange)
Operation indicator (Orange)
5 0.197
Beam size:
1.2 × 0.8 0.047 × 0.031
8.4 0.331
14.6
0.575
2
0.079
1.5
0.059
3.5
0.138
ø2.5 ø0.098 cable,
1 m 3.281 ft long
2
0.079
DIMENSIONS (Unit: mm in)The CAD data can be downloaded from our website.
PM-Y45□
Sensor
Sensor Sensor
Sensor
Sensor
Sensor
15
PM-25 PM-45 PM-65
PM-T65W PM-T65W-P
PM-Y65 PM-Y65-P PM-F65 PM-F65-P
PM-T65 PM-T65-P
PM-K65 PM-K65-P
Beam
axis
Beam
axis
20 0.787
3.7 0.146
2 0.079
22.4
0.882
7.4 0.291
8.4 0.331
13.4
0.528
6
0.236
13.8
0.543
7
0.276
3.5 0.138
20 0.787
26 1.024
Operation indicator (Orange)
6
0.236
2-ø3.2 ø0.126 mounting holes
Beam size:
1.2 × 0.8 0.047 × 0.031
2–mounting holes
Operation indicator (Orange)
3.2 0.126
3.7 0.146
2
0.079
PM-K65(-P)
Beam axis
Beam axis
16.7
0.657
22.4 0.882
13.4
0.528
6
0.236
(2 0.079)
8.4
0.331
26 1.024
6
0.236
4 0.157
13 0.512
7.4 0.291
10
0.394
20 0.787
1.6 0.063
4.1 0.161
6.5
0.256
8.3
0.327
6
0.236
2.3 0.091
7.4
0.291
14
0.551
Operation indicator
(Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
2–elongated
mounting holes
Operation indicator
(Orange)
PM-T65W(-P)
Beam
axis
Beam
axis
22.7
0.894
7
0.276
7
0.276
3.5 0.138
13.4
0.528
14.9
0.587
8.4 0.331
6.5
0.256
2.5 0.098
6
0.236
Operation indicator (Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
2-ø3.5 ø0.138
mounting holes
Operation indicator (Orange)
12.9
0.508
6
0.236
2
0.079
PM-Y65(-P)
PM-F65(-P)
Beam
axis
Beam
axis
7
0.276
13.5
0.531
6
0.236
13.4
0.528
6 0.236
22.4
0.882
7.7
0.303
8.4
0.331
16.3
0.642
4.1 0.161
3.7
0.146
2.5
0.098
2.1
0.083
Operation indicator (Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
Elongated mounting hole
Operation indicator (Orange)
3
0.118
ø2.4 ø0.094
6.5 0.256 3 0.118
8.3
0.327
3.2
0.126
(2 0.079)
Beam
axis
Beam
axis
22.4
0.882
13.7
0.539
13.4
0.528
8.4
0.331
7
0.276
3
0.118
6.2
0.244
1.6 0.063
4.1
0.161
3.2 0.126
26 1.024
13
0.512
7.4 0.291
20 0.787
6
0.236
6.5
0.256
8.3
0.327
Operation indicator (Orange)
Beam size: 1.2 × 0.8 0.047 × 0.031
2–elongated mounting holes
Operation indicator (Orange)
PM-T65(-P)
2
0.079
Beam
axis
Beam
axis
26.2 1.031
20 0.787
7.2 0.283
14.9
0.587
(2 0.079)
9 0.354
8.4 0.331
15.7
0.618 3.2
0.126
26.2 1.031
20 0.787
3.9 0.154
1.7 0.067
7
0.276
6
0.236
13.4
0.528
6
0.236
6.5
0.256
Beam size:
1.2 × 0.8 0.047 × 0.031
2-ø3.2 ø0.126 mounting holes
Operation indicator (Orange)
2–mounting
holes
Operation indicator (Orange)
PM-L65(-P)
12.9 0.508
DIMENSIONS (Unit: mm in)The CAD data can be downloaded from our website.
PM-L65 PM-L65-P
Sensor
Sensor Sensor
Sensor
Sensor
Sensor
PM-25 PM-45 PM-65
Disclaimer
The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be regarded as
granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as patent
rights, with respect to such applications, or that the described applications may not infringe any intellectual property rights, such as patent rights, of a third party.
Please contact:
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Global Sales Department
■Telephone: +81-568-33-7861 ■Facsimile: +81-568-33-8591
panasonic.net/id/pidsx/global
All Rights Reserved © 2015
Specifications are subject to change without notice. Printed in JapanNo.CE-PM254565-12 December, 2015
PM-R65W PM-R65W-P
PM-R65 PM-R65-P
PM-F65W PM-F65W-P
Beam
axis
PM-F65W(-P)
Beam
axis
7
0.276
13.6
0.535
13
0.512
7
0.276
9 0.354
11.4
0.449
6 0.236
13.4
0.528
6
0.236
13.7
0.539
7
0.276
2.5 0.098
22.4
0.882
8.3 0.327
6.5 0.256
Operation indicator
(Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
2-ø3.5 ø0.138
mounting holes
Operation indicator (Orange)
(2 0.079)
Beam
axis
Beam
axis
7 0.276
13.6
0.535
13
0.512
7
0.276
6 0.236
13.4
0.528
6
0.236
13.7
0.539
7
0.276
2.5 0.098
22.4
0.882
8.3 0.327
6.5 0.256
Operation indicator (Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
2-ø3.5 ø0.138
mounting holes
Operation indicator (Orange)
(2 0.079)
PM-R65W(-P)
9 0.354
11.4
0.449
Beam
axis
Beam
axis
7
0.276
13.5
0.531
6
0.236
13.4
0.528
6
0.236
22.4
0.882
7.7 0.303
8.4 0.331
16.3
0.642
4.1 0.161
3.7 0.146
2.5 0.098
2.1
0.083
Operation indicator (Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
Elongated
mounting hole
Operation indicator (Orange)
3
0.118
ø2.4
ø0.094
6.5
0.256
3
0.118
8.3 0.327
3.2
0.126
PM-R65(-P)
(2 0.079)
DIMENSIONS (Unit: mm in)The CAD data can be downloaded from our website.
CN-14A-C□ CN-14A-R-C□
ø3.7 ø0.146 cable
L
35
1.378
8
0.315
8
0.315
50
1.969
Model No. Length L
CN-14A(-R)-C1 1,000 39.370
CN-14A(-R)-C2 2,000 78.740
CN-14A(-R)-C3 3,000 118.110
CN-14A(-R)-C5 5,000 196.850
•Length L
Sensor
Sensor
Sensor
Connector attached cable (Optional)
