A Cal Test Electronics Company
22820 Savi Ranch Parkway
Yorba Linda, CA 92887
800-572-1028
globalspecialties.com
20160712
DSC-5300
50 MHz Digital
Storage Oscilloscope
Features
zBandwidth: 50 MHz
zSingle channel real-time sampling rate of
up to 500 MSa/s
z32k points of memory depth
z7” Color TFT LCD display
zTrigger types: Edge, Pulse, Video, Slope
and Alternative
zAuto measure 32 parameters (Voltage and
Time)
zOn board help menu
zInterface Options: USB, LAN, RS-232,
Pass/Fail
Overview
The Global Specialties DSC-5300
digital storage oscilloscope (DSO) is
a portable benchtop instrument used
for making measurements of signals
and waveforms. The oscilloscope’s
bandwidth is capable of capturing up
to 50 MHz signals with a real time
sampling rate of up to 500 MSa/s. With
up to 32 kpts of deep memory, it allows
for capturing more details of a signal for
analysis and display on the large color
LCD display.
Applications
The DSC-5300 Series
Signal Generators
are ideally suited for
applications where value
and quality are equally
important such as for:
zEducational labs
zTechnical schools
zInternal training
facilities
zHobbyists
Specifications:
All specification appliesto 10X probe andAll the DSC-5300 Digital Storage
Oscilloscope.
To verify that the oscilloscope meets specifications, the oscilloscope must first
meet the following conditions:
●The oscilloscope must have been operating continuously for thirty minutes
within the specified operating temperature.
●You must perform the Do Self Cal operation, accessible through the Utility
menu, if the operating temperature changes by more than 5° C.
●The oscilloscope must be within the factory calibration interval
All specifications are established unless noted “typical.”
Inputs
Input Coupling AC, DC,GND
Input Impedance 1MΩ±2% || 16Pf±3Pf,
Maximum Input
voltage
400V （DC+AC PK-PK，1MΩinput impedance，
X10
），
CAT I
Ch to Ch Isolation
(Both channels in
same V/div setting)
>100:1 at 25MHz
Probe Attenuator
1X,10X
Probe Attenuator
Factors Set 1X,5X,10X,50X,100X, 500X,1000X
Vertical System
Vertical Sensitivity
2mV/div -10V/div(1-2-5 order)
Channel Voltage
Offset Range 2mV –200mV: ±1.6V 206mV - 10V: ±40V
Vertical Resolution 8 bit
Channels
2
Bandwidth 50MHz
Single-shot
Bandwidth 50MHz
BW Flatness at BNC
input
DC -10% of rated BW: +/- 1dB
10% - 50% of rated BW: +/- 2dB
50% - 100% of rated BW: + 2dB/-3dB
Lower frequency limit
(AC -3dB) ≤10Hz(at input BNC)
Noise: Pk-Pk for 3K
record
≤0.6 Div for average of 10 Pk-Pk readings, Fixed
gain settings
≤0.7 Div for average of 10 Pk-
Pk readings,
Variable gain settings
SFDR including
harmonics
(measured with FFT)
>=35dB
DC Gain Accuracy
＜±3.0%: 5
mv/div to 10V/div in Fixed Gain
Ranges
＜±4.0%: 2mv/div Variable Gain Ranges
DC Measurement
Accuracy:
All Gain settings ≤
100mv/div
±[3%* （|reading|+|offset| ）
+1% *of |offset|
+0.2div+2mv]
DC Measurement
Accuracy:
All Gain settings ＞
100mv/div
±[3%* （|reading|+|offset| ）
+1%* of |offset|
+0.2div+100mv]
Rise time <14ns
Overshoot, Typical
(using 500ps pulse)
<10% with probe or BNC input w/ 50 Ohm feed
thru
Ch to Ch Skew (both
channels in same
V/div setting)
<4ns
(Equivalent to 2 minor divisions in smallest
t/div)
Math operation +, -, *, /, FFT
FFT
Window mode:Hanning, Hamming, Blackman,
Rectangular
Sampling points:1024
Bandwidth limited 20MHz ±
40% (Note: BW limited below
20MHz when using probe in x1)
Real Time
Sampling Rate
SingleChannel:500MSa/s,Double Channel:
250MSa/s( When timebase faster than 250ns/div)
Equivalent
Sampling Rate 50GSa/s (SDS1022DL:10GSa/s)
Measure Display
Modes
MAIN, WINDOW, WINDOW ZOOM, ROLL, X-Y
Timebase Accuracy
±
100ppm measured over 1ms interval
Horizontal Scan
Range
1/2.5/5/25nS/DIV -
50S/DIV (According to the
Bandwidth)
Scan: 100mS/DIV
～
50S/DIV (1-2.5-5 sequence)
Trigger Types Edge, Pulse Width, Video, Slope, Alternative
Trigger Source CH1,CH2,EXT,EXT/5,AC Line
Trigger Modes Auto, Normal, Single
Trigger Coupling AC, DC, LF rej, HF rej
Trigger Level Range
CH1,CH2: ±6divisions from center of screen
EXT: ±1.2V
EXT/5: ±6V
Trigger Displacement Pre-trigger：（ Memory depth/（2*sampling））,
Delay Trigger: 271.04DIV
Trigger Level
Accuracy
(typical) applicable for
the signal of rising
and falling time ≥20ns
Internal： ±(0.2 div×V/div)( within±4 divisions
from center of screen)
EXT：±(6% of setting + 40 mV)
EXT/5：±(6% of setting + 200 mV)
Trigger Sensitivity
For fixed gain ranges
1 Divisions: DC-10MHz
1.5 Divisions: 10MHz - Max BW
EXT: 200mVpp DC-10MHz,
300mVpp 10MHz -Max BW
EXT/5:1Vpp DC-10MHz,
1.5Vpp 10MHz - Max BW
Pulse Width Trigger
Trigger Modes: (
＞
,
＜
,
＝
)positive Pulse Width,
(＞,＜,＝)Negative Pulse Width
Pulse Width Range:20ns – 10s
Video Trigger
Support signal Formats:PAL/SECAM,NTSC
Trigger condition :odd field,even field,all lines,
line Num
Slope Trigger
(＞,＜,＝) Positive slope, (＞,＜,＝) Negative
slope
Time: 20ns-10s
Alternative Trigger
CH1 trigger type: Edge, Pulse, Video, Slope
CH2 trigger type: Edge, Pulse, Video, Slope
X-Y Mode
X-pole Input / Y-Pole
Input
Channel 1 (CH1) / Channel 2 (CH2)
Sample Frequency
XY mode has a breakthrough that trad
oscilloscopes restrict sampling rate at 1MSa/s.
Support 25Ksa/s～250Msa/s adjusted.
Hard Ware Frequency Counter
Reading resolution 1Hz
Accuracy ±0.01%
Range DC Couple, 10Hz to MAX Bandwidth
Signal Types
Satisfying all Trigger signals(Except Pulse
width trigger and Video Trigger)
Control Panel Function
Auto Set
Auto adjusting the Vertical, Horizontal system
and Trigger Position
Save/Recall Support 2 Group referenced Waveforms, 20
Group setups, 20 Group captured Waveforms
internal Storage/Recall function and USB flash
driver storage function.
Measure System
Auto Measure
(32 Types)
Vpp, Vmax, Vmin, Vamp, Vtop, Vbase,Vavg,
Mean,Crms, Vrms, ROVShoot, FOVShoot,
RPREShoot, FPREShoot, Rise time, Fall time,
Freq, Period,+ Wid,－Wid, ＋Dut, －Dut,
BWid, Phase,FRR, FRF, FFR, FFF, LRR, LRF,
LFR, LFF
Cursor Measure Manual mode, Track mode and Auto mode
General Specifications:
Display System
Display Mode
Color TFT 7.0in.(177.8mm)diagonal
Liquid Crystal Display
Resolution 480 horizontal by 234 vertical pixels
Display Color 24bit
Display Contrast
（
Typical state
）
150:1
Backlight Intensity（Typical state
）
300nit
Wave display range
8 x 18div
Wave Display Mode
Dots, Vector
Persist
Off, 1 sec, 2 sec,5 sec, Infinite
Menu Display 2 sec, 5 sec, 10 sec, 20 sec, Infinite
Screen-Saver Off,1min,2min,5min,10min,15min,3
0min,1hour,2hour,5hour
Skin
Classical, Modern, Tradition,
Succinct
waveform interpolation Sin(x)/x，Linear
Color model
Normal , Invert
Language
Simplified Chinese
, Traditional
Chinese, English
, Arabic, French,
German, Russian, Portuguese
Spanish, Japanese, Korean, Italian
Environments
Temperature Operating:10℃to +40℃
Notoperating:-20℃to +60℃
Cooling The fan forces it cold.
Humidity Operating: 85%RH,40℃,24 hours
Notoperating: 85%RH,65
℃
,24 hours
Height Operating: 3000m
Notoperating:15,266m
Power Supply
Input Voltage 100-240 VAC, CAT II, Auto selection
Frequency Scope 45Hz to 440Hz
Power
50VA Max
Mechanical
Dimension
length 323.1mm
Width 135.6mm
Height
157mm
weight
2.5kg
Standard Accessories:
●1:1/10:1 probe (2PCS)
●Power Cable
●Quick Start Guide
●USB Cable