Data Sheet No. PD10041 revJ Series PVI5013RPbF Photovoltaic Isolator Solid-State Opto-Isolated MOSFET Gate Driver Dual-Channel, 5V, 1.0A General Description The PVI5013R Photovoltaic Isolator is a dual-channel, opto-isolated driver capable of directly driving gates of power MOSFETs or IGBTs. It utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. The output is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovolt aic generator. The PVI5013R is ideally suited for applications requiring high-current and/or high voltage switching with optical isolation between the low-level driving circuitry and high-energy or high- voltage load circuits. It can be used for directly driving gates of power MOSFETs. The dual- channel configuration allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to provide higher-current drive for power MOSFETs or higher-voltage drive for IGBTs. PVI5013R employs a fast turn-off circuitry. PVI5013R Photovoltaic Isolators are packaged in an 8-pin, molded DIP package with either thru-hole or surface-mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Features Monolithic construction 3,750 VRMS I/O Isolation 1,200 VDC output-to-output isolation Dual-Channel application flexibility Solid-State reliability UL recognized and BABT Certified Please refer to Part Identification information opposite. Applications Telecommunications Load Distribution Industrial Controls Instrumentation and Measurement www.irf.com Part Identification PVI5013RPbF PVI5013RSPbF PVI5013RS-TPbF thru-hole surface-mount surface-mount, Tape and Reel 1 Series PVI5013RPbF Electrical Specifications (-40C TA +85C unless otherwise specified) INPUT CHARACTERISTICS Minimum Input Current (see figure 1) Input Current Range (see figure 1) Maximum Continuous Input Current @ TA=+25C LED Forward Voltage Drop @ 5mA, TA=+25C (see figure 3) Maximum Reverse Voltage Maximum Reverse Current @ -6VDC, TA=+25C Limits 5.0 3.0 to 25 40 1.4 6.0 10 Units OUTPUT CHARACTERISTICS Limits Units Minimum Forward Voltage Maximum Reverse Current COUPLED CHARACTERISTICS 8.0 10 Limits Minimum Output Voltage @ ILED = 5mA, RL = 10M 3 @ TA=0C to +70C (see figures 1 and 2) Maximum Output Voltage @ ILED = 5mA, RL = 10M 8 @ TA=0C to +70C (see figures 1 and 2) Maximum Voltage Differential Between Outputs 1.0 @ ILED = 5mA, RL = 10M Typical Output Short-Circuit Current 1.0 @ ILED = 5mA, @ TA=+25C (see figures 1 and 2) Maximum Turn-On Time @ ILED = 5mA, CLOAD = 200pF (see figure 4) 5 Max. Turn-Off Time @ ILED = 5mA, CLOAD = 200pF (see figure 4) 0.25 Off-State Clamping Resistance: minimum 100 maximum 3300 mA mA mA V V A VDC ADC Units V V V A ms ms GENERAL CHARACTERISTICS Limits Minimum Dielectric Strength, Input-Output Minimum Dielectric Strength, Output-to-Output Minimum Insulation Resistance, Input-to-Output @TA=+25C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage 3750 1200 1012 VRMS VDC 5.0 +260 -40 to +85 -40 to +100 qpF C C C Connection Diagram International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. www.irf.com Units 1 8 (+) 2 7 (-) 3 6 (+) 4 5 (-) 2 Series PVI5013RPbF 18 Open Circuit Voltage Output Voltage (VDC) 8 16 RL=10M 7 14 6 12 5 10 4 8 3 6 2 4 Short Circuit Current 2 1 0 0 5 10 15 20 25 30 35 40 0 1.2 IL E D=5mA 1.1 Normalized Output 20 9 Output Short-Circuit Current (uA) 10 0 0 0.5 1.0 1.5 2.0 LED Forward V ol tage Drop (V ol ts DC) Figure 3. Input Characteristics (Current Controlled) www.irf.com S ho rt-Ci rc uit C urr ent 0.5 -40 R es pons e T ime (mic ros ec onds ) Ma x. dev ice an d -40 deg . C limit T Y P IC AL Mi n. de v ice and +8 5 deg . C limit Input C urrent (mA ) 4 0.7 0 -20 20 40 60 80 100 5000 16 8 Output V oltage 0.8 Ambient T em perature (deg. C) Figure 2. Typical Variation of Output CAUTION: provide current limiting so that 25 mA maximum steadystate control current rating is not exceeded 12 0.9 0.6 Input Current (mA) Figure 1. Typical Output Characteristics 20 1.0 IL E D=5mA Ton 1000 500 100 50 100 Toff 200 300 400 500 Load C apacitance (pF) Figure 4. Typical Response Time 3 Series PVI5013RPbF Case Outlines 01-2004 04 01-2005 04 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 Data and specifications subject to change without notice. 2/2008 www.irf.com 4