SFH213FA - OSRAM Opto Semiconductors

SFH 213

SFH 213 FA

Silizium-PIN-Fotodiode mit sehr kurzer Schaltzeit

Silicon PIN Photodiode with Very Short Switching Time

Lead (Pb) Free Product - RoHS Compliant

SFH 213 SFH 213 FA

2007-04-02 1

Wesentliche Merkmale

• Speziell geeignet für Anwendunge n im Bereich

von 400 nm bis 1100 nm (SFH 213 ) und bei

880 nm (SFH 213 FA)

• Kurze Schaltzeit (typ. 5 ns)

•5 mm-Plastikbauform im LED-Gehäuse

• Auch gegurtet lieferbar

Anwendungen

• Industrieelektronik

• „Messen/Steuern/Regeln“

• Schnelle Lichtschranken für Gleich- und

Wechsellichtbetrieb

•LWL

Typ

Type Bestellnummer

Ordering Code

SFH 213 Q62702P0930

SFH 213 FA Q62702P1671

Features

• Especially suitable for applications from

400 nm to 1100 nm (SFH 213) and of 880 nm

(SFH 213 FA)

• Short switching time (typ. 5 ns)

•5 mm LED plastic package

• Also available on tape and reel

Applications

• Industrial electronics

• For control and drive circuits

• Photointerrupters

• Fiber optic transmission systems

2007-04-02 2

SFH 213, SFH 213 FA

Grenzwerte

Maximum Ratings

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

Betriebs- und Lagertemperatur

Operating and storage temperature range Top; Tstg – 40 … + 100 °C

Sperrspannung

Reverse voltage VR50 V

Verlustleistung

Total power dissipation Ptot 150 mW

Kennwerte (TA = 25 °C)

Characteristics

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

SFH 213 SFH 213 FA

Fotostrom

Photocurrent

VR = 5 V, Normlicht/standard light A,

T = 2856 K, EV = 1000 lx

VR = 5 V, λ = 870 nm, Ee = 1 mW/cm2

135 (≥ 100)

–

90 (≥ 65)

μA

Wellenlänge der max. Fotoempfindlichkeit

Wavelength of max. sensitivity λS max 850 900 nm

Spektraler Bereich der Fotoempfindlichkeit

S = 10% von Smax

Spectr al range of sens itivity

S = 10% of Smax

λ400 …1100 750 … 1100 nm

Bestrahlungsempfindliche Fläche

Radiant sensitive area A 1 1 mm2

Abmessung der bestrahlungsempfindlichen Fläche

Dimensions of radiant sensitive area L × B

L × W1 × 1 1 × 1 mm × mm

Halbwinkel

Half angle ϕ ± 10 ± 10 Grad

deg.

Dunkelstrom, VR = 20 V

Dark current IR 1 (≤ 5) 1 (≤ 5) nA

Spektrale Fotoempfindlichkeit, λ = 870 nm

Spectr al sensitivity Sλ0.62 0.59 A/W

Quantenausbeute, λ = 870 nm

Quantum yield η0.89 0.86 Electrons

Photon

SFH 213, SFH 213 FA

2007-04-02 3

Leerlaufspannung

Open-circuit voltage

Ev = 1000 Ix, Normlicht/standard light A,

T = 2856 K

Ee = 0.5 mW/cm2, λ = 870 nm

430 (≥ 350)

–

380 (≥ 300)

Kurzschlußstrom

Short-circuit current

Ev = 1000 Ix, Normlicht/standard light A,

T = 2856 K

Ee = 0.5 mW/cm2, λ = 870 nm

ISC

125

–

μA

Anstiegs- und Abfallzeit des Fotostromes

Rise and fall time of the photocurrent

RL = 50 Ω; VR = 20 V; λ = 850 nm; Ip = 800 μA

tr, tf5 5 ns

Durchlaßspannung, IF = 80 mA, E = 0

Forward voltage VF1.3 1.3 V

Kapazität, VR = 0 V, f = 1 MHz, E = 0

Capacitance C011 11 pF

Temperaturkoeffizient von VO

Temperature coefficient of VO

TCV– 2.6 – 2.6 mV/K

Temperaturkoeffizient von ISC

Temperature coefficient of ISC

Normlicht/standard light A

λ = 870 nm

TCI

0.18

–

0.2

%/K

Rauschäquivalente Strahlungsleistung

Noise equivalent power

VR = 10 V, λ = 870 nm

NEP 2.9 × 10– 14 2.9 × 10– 14

Nachweisgrenze, VR = 20 V, λ = 870 nm

Detection limit D* 3.5 × 1012 3.5 × 1012

Kennwerte (TA = 25 °C)

Characteristics (cont’d)

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

SFH 213 SFH 213 FA

------------

cm Hz×

--------------------------

SFH 213, SFH 213 FA

2007-04-02 4

Relative Spectral Sensitivity

SFH 213, Srel = f (λ)

Photocurrent IP = f (Ee), VR = 5 V

Open-Circuit Voltage VO = f (Ee)

SFH 213 FA

Directional Characteristics

Srel = f (ϕ)

OHF01034

rel

400 600 800 1000 1200

100

Relative Spectral Sensitivity

SFH 213 FA, Srel = f (λ)

Total Power Dissipation

Ptot = f (TA)

OHF01773

rel

400 600 800 1000 1200

100

OHF00394

tot

020 40 60 80 ˚C 100

100

120

140

160

Photocurrent IP = f (Ev), VR = 5 V

Open-Circuit Voltage VO = f (Ev)

SFH 213

Dark Current

IR = f (VR), E = 0

OHF01026

20 V 3010

SFH 213, SFH 213 FA

2007-04-02 5

Maßzeichnung

Package Outlines

Maße in mm (inch) / Dimensions in mm (inch).

Lötbedingungen

Soldering Conditions

Wellenlöten (TTW) (nach CECC 00802)

TTW Soldering (acc. to CECC 00802)

Cathode (Diode)

GEXY6260

Collector (Transistor)

5.7 (0.224)

5.1 (0.201)

1.8 (0.071)

1.2 (0.047) Chip position

5.9 (0.232)

5.5 (0.217)

0.6 (0.024)

0.4 (0.016)

0.6 (0.024)

0.4 (0.016)

spacing

2.54 (0.100)

0.8 (0.031)

0.5 (0.020)

29 (1.142)

27 (1.063)

9.0 (0.354)

8.2 (0.323)

7.5 (0.295)

7.8 (0.307)

Area not flat

ø4.8 (0.189)

ø5.1 (0.201)

OHLY0598

050 100 150 200 250

100

150

200

250

300

235 C

10 s

C... 260

1. Welle

1. wave

2. Welle

2. wave

5 K/s 2 K/s

ca 200 K/s

CC... 130100

2 K/s Zwangskühlung

forced cooling

Normalkurve

standard curve

Grenzkurven

limit curves

2007-04-02 6

SFH 213, SFH 213 FA

Published by

OSRAM Opto Semiconductors GmbH

Wernerwerkstrasse 2, D-93049 Regensburg

www.osram-os.com

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components 1 , may only be used in life-supp ort devices or systems 2 with the express written approval of OSRAM OS.

1 A critical componen t is a component usedin a life-support device or syste m whose failure can reasonably be expected

to cause the failure of that life-support devic e or system, or to a ffect its safety or e ffectiveness of that device or system.

2 Life support devices or syste ms are intended (a) to be implanted in the human body, o r (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.