Raychem interconnect Division Specification Europe Control Drawing 207W213 thru 264 a) Part as supplied. oy -_ J DIA b) Part after unrestricted recovery. 07 RING om yl NN 207W3XX SECTION A-A Dimensions Cin millimetres.) H Jo, JO K M P R 5 T JW Hole Torque Part REF MIN. MAX MAX REF THREAD 410% 410% +10% REF +#20% DIA Nm Number b Qa b b b b b b b b b +0.5 207W213 12 10 4 15.3 23.0 20 62 49 13. 32.0 1.0 24 3 207W223 20 i8 7 19.5 33.0 30 72 59 16 42.0 1.8 34 8 207W234 31 28 12. 27.0 46.0 42 87 74 1g 58.0 2.0 4? i] 207W245 45 42 18 32.2 59.5 56 102-89 1@ 71,0. 3.0 60.5 14 207W256 68 64 3039.0 84.0 80 122.109 1897.0 3.0 Bs 16 207W264 40 38 15 28.3 54.0 50 95 82 1866.5. _2.5 55 i Recomended maximum panel thickness is &mm, Copyright (1) The copyright in this drawing is the property oF Tyco Electronics UK Ltd. The drawing is igsued on the condotion that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Checked WX Issue 17 Date July 2000 Conforms to 150 Recommendations 3rd Angle Projection Approval Not to Scale f>@ Design L . 116. <ppyhte "MS y 207W273 thru 264 E.C.R. Iss. Date N Details of Change oO. 16 June 1999 CRS9-HM-0004] Torque was 5Nm on 207W213 17 July 2000 | CROO-HM-0010| 207W3XX was typed as 207W4Xx (Ordering Information) DOT WAKK-*K*/KK-O | snes ve Slash Number Cif required see compatibility chart) Modification number Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) MATERIAL DASH NUMBER MATERIAL DESCRIPTION COATING SLASH NUMBER Y MI- POLY FIN, FLEXIBLE /42 / AST R U R TANT Z RO_HA /36,/) F N AS SUPPLIED DIMENSIONS ARE FOR UNCOATED PARTS, WHEN COATING IS ADDED, ENTRY DIAMETERS WILL REDUCE BY 1.5mm MAX. Raychem Interconnect a Division of Tyco Electronics Swindon, Wiltshire, England. SN3 SJA Telephone: (01793) 528171 Fax: 572516