2.5V Drive Nch MOSFET RJU003N03 zDimensions (Unit : mm) zStructure Silicon N-channel MOSFET UMT3 2.0 0.9 zFeatures 1) Low On-resistance. 2) Low voltage drive (2.5V drive). 0.7 0.2 0.3 2.1 1.25 (3) 1.3 (1) Source zApplications Switching Each lead has same dimensions (2) Gate Abbreviated symbol : LP (3) Drain zPackaging specifications and hFE Package Type 0.15 0.1Min. (1) (2) 0.65 0.65 zInner circuit Taping Code T106 Basic ordering unit (pieces) 3000 (3) RJU003N03 2 (2) 1 1 ESD PROTECTION DIODE (1) 2 BODY DIODE (1) Source (2) Gate (3) Drain zAbsolute maximum ratings (Ta=25C) Parameter Drain-source voltage Gate-source voltage Drain current Continuous Pulsed Total power dissipation Channel temperature Range of storage temperature Symbol VDSS VGSS ID IDP 1 PD 2 Tch Tstg Limits 30 12 300 1.2 200 150 -55 to +150 Unit V V mA A mW C C Symbol Rth(ch-a) Limits 625 Unit C/W 1 Pw10s, Duty cycle1% 2 Each terminal mounted on a recommended land zThermal resistance Parameter Channel to ambient Each terminal mounted on a recommended land www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 1/4 2009.03 - Rev.A Data Sheet RJU003N03 zElectrical characteristics (Ta=25C) Symbol Min. Typ. Max. IGSS Gate-source leakage Drain-source breakdown voltage V(BR) DSS Zero gate voltage drain current IDSS Gate threshold voltage VGS (th) Parameter - 30 - 0.8 - - - 0.4 - - - - - - - - - - - 0.8 0.9 1.4 - 24 11 5 6 4 9 32 10 - 1 1.5 1.1 1.3 1.9 - - - - - - - - Static drain-source on-state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time RDS (on) Yfs Ciss Coss Crss td (on) tr td (off) tf Unit A V A V S pF pF pF ns ns ns ns Conditions VGS=12V, VDS=0V ID= 1mA, VGS=0V VDS= 30V, VGS=0V VDS= 10V, ID= 1mA ID= 300mA, VGS= 4.5V ID= 300mA, VGS= 4V ID= 300mA, VGS= 2.5V VDS= 10V, ID= 300mA VDS= 10V VGS=0V f=1MHz VDD 15V ID= 150mA VGS= 4V RL=100 RG=10 Pulsed zBody diode characteristics (Source-drain) (Ta=25C) Parameter Forward voltage Symbol Min. Typ. Max. VSD - - 1.2 www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. Unit V Conditions IS= 200mA, VGS=0V 2/4 2009.03 - Rev.A Data Sheet RJU003N03 zElectrical characteristics curves Ta=25C Pulsed 0.2 VGS= 1.8V 0.15 VGS= 1.6V 0.1 VGS= 1.4V 0.05 VGS= 1.2V 0.15 VGS= 1.6V 0.1 VGS= 1.2V 0.05 0 0 0 0.4 0.6 0.8 0.01 2 4 6 8 10 0 1 2 3 DRAIN-SOURCE VOLTAGE : VDS[V] DRAIN-SOURCE VOLTAGE : VDS[V] GATE-SOURCE VOLTAGE : VGS[V] Fig.1 Typical Output Characteristics() Fig.2 Typical Output Characteristics() Fig.3 Typical Transfer Characteristics Ta= 25C Pulsed VGS= 2.5V VGS= 4.0V VGS= 4.5V 1 0.1 0.01 0.1 1 10 VGS= 4.5V Pulsed 0.1 0.01 0.1 DRAIN-CURRENT : ID[mA] 1 REVERSE DRAIN CURRENT : Is [A] Ta=125C Ta=75C Ta=25C Ta= -25C 1 1 DRAIN-CURRENT : ID[A] Fig.7 Static Drain-Source On-State Resistance vs. Drain Current() www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. Ta=125C Ta=75C Ta=25C Ta= -25C 1 0.1 0.01 0.1 1 DRAIN-CURRENT : ID[A] VGS=0V Pulsed 0.1 Ta=125C Ta=75C Ta=25C Ta=-25C 0.01 0.1 VGS= 4.0V Pulsed DRAIN-CURRENT : ID[A] 1 0.1 0.01 10 Fig.5 Static Drain-Source On-State Resistance vs. Drain Current() 10 VGS= 2.5V Pulsed Ta=125C Ta=75C Ta=25C Ta= -25C 1 Fig.4 Static Drain-Source On-State Resistance vs. Drain Current() STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[] Ta= 125C Ta= 75C Ta= 25C Ta= - 25C 0.001 0 1 VDS= 10V Pulsed 0.1 STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[] 10 0.2 STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[] STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[] 0.2 Fig.6 Static Drain-Source On-State Resistance vs. Drain Current() STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(ON)[] DRAIN CURRENT : ID[A] 0.25 1 Ta=25C Pulsed VGS= 10V VGS= 4.5V VGS= 4.0V VGS= 2.0V 0.25 DRAIN CURRENT : ID[A] VGS= 10V VGS= 4.5V VGS= 4.0V DRAIN CURRENT : ID[A] 0.3 0.3 10 8 ID= 100mA 6 4 ID= 300mA Ta=25C Pulsed 2 0 0 0.5 1 SOURCE-DRAIN VOLTAGE : Fig.8 Reverse Drain Current vs. Sourse-Drain Voltage 3/4 1.5 0 2 4 6 8 10 GATE-SOURCE VOLTAGE : VGS[V] Fig.9 Static Drain-Source On-State Resistance vs. Gate Source Voltage 2009.03 - Rev.A Data Sheet RJU003N03 40 tf 1000 Ta=25C VDD= 15V VGS= 4.0V RG=10 Pulsed 100 tr td(on) 10 1 0.001 0.01 0.1 100 VDD= 24V VDD=15V VDD=10V 30 20 Ta=25C ID= 0.3A RG=10 Pulsed 10 0 NORMARIZED TRANSIENT THERMAL RESISTANCE : r (t) 10 DRAIN CURRENT : ID (A) Operation in this area is limited by RDS(ON) (VGS=4.5V) 100us 1 1ms PW = 10ms DC operation 0.01 Ta = 25C Single Pulse MOUNTED ON SERAMIC BOARD 0.1 1 10 Crss Ta=25C f=1MHz VGS=0V 0.5 1 1.5 2 0.01 100 www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 0.1 1 10 100 Fig.12 Typical Capacitance vs. Drain-Source Voltage 10 1 0.1 Ta = 25C Single Pulse Rth(ch-a)(t) = r(t)xRth(ch-a) Rth(ch-a) = 625 C/W Mounted on a SERAMIC board 0.01 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 PULSE WIDTH : Pw(s) DRAIN-SOURCE VOLTAGE : VDS[V] Fig.13 Maximum Safe Operating Aera Coss DRAIN-SOURCE VOLTAGE : VDS[V] Fig.11 Dynamic Input Characteristics Fig.10 Switching Characteristics 0.001 10 TOTAL GATE CHARGE : Qg [nC] DRAIN-CURRENT : ID[A] 0.1 Ciss 1 0 1 CAPACITANCE : C [pF] td(off) GATE-SOURCE VOLTAGE : VGS [V] SWITCHING TIME : t [ns] 10000 Fig.14 Normalized Transient Thermal Resistance vs. Pulse Width 4/4 2009.03 - Rev.A Appendix Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2009 ROHM Co.,Ltd. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster @ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix-Rev4.1