LMH0202 Dual SMPTE 292M / 259M Serial Digital Cable Driver General Description Features The LMH0202 Dual SMPTE 292M / 259M serial digital cable driver is a monolithic, high-speed cable driver designed for use in SMPTE 292M / 259M serial digital video and ITU-T G.703 serial digital data transmission applications. The LMH0202 drives 75 transmission lines (Belden 8281, Belden 1694A or equivalent) at data rates up to 1.485 Gbps. n SMPTE 292M, SMPTE 344M and SMPTE 259M compliant n Data rates to 1.485 Gbps n Dual differential inputs n Dual 75 differential outputs n Two selectable slew rates n Adjustable output amplitude n Single 3.3V supply operation n Commercial temperature range: 0C to +70C n Typical power consumption: 250mW in SD mode and 298mW in HD mode The LMH0202 provides two selectable slew rates for SMPTE 259M and SMPTE 292M compliance. The output voltage swing is adjustable via a single external resistor. The LMH0202 offers the flexibility to implement either dual differential inputs or a single differential input (externally routed via PCB) to dual differential outputs. The latter option provides an ideal solution for DVB-ASI applications where only the non-inverted outputs are typically used. The LMH0202 is powered from a single 3.3V supply. Power consumption is typically 250mW in SD mode and 298mW in HD mode. Applications n SMPTE 292M, SMPTE 344M, and SMPTE 259M serial digital interfaces n DVB-ASI applications n Sonet/SDH and ATM interfaces n Digital routers and switches n Distribution amplifiers n Buffer applications n Video cameras Connection Diagram 20173101 16-Pin TSSOP Order Number LMH0202MT See NS Package Number MTC16 (c) 2006 National Semiconductor Corporation DS201731 www.national.com LMH0202 Dual SMPTE 292M / 259M Serial Digital Cable Driver June 2006 LMH0202 Typical Application 20173102 www.national.com 2 Supply Voltage: Input Voltage (all inputs) -0.3V to VCC+0.3V -65C to +150C +150C Lead Temperature (Soldering 4 Sec) 3.3V 5% Supply Voltage (VCC - VEE): Operating Free Air Temperature (TA) LMH0202MT +260C Package Thermal Resistance JA 16-pin TSSOP JC 16-pin TSSOP 250V Recommended Operating Conditions 28mA Junction Temperature 5kV ESD Rating (MM) -0.5V to 3.6V Output Current Storage Temperature Range ESD Rating (HBM) 0C to +70C +125C/W +105C/W DC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Notes 2, 3). Symbol Parameter VCMIN Input Common Mode Voltage VSDI Input Voltage Swing Conditions Output Voltage Swing VSDHD SD/HD Input Voltage ISDHD SD/HD Input Current ICC Supply Current Min Max Units SDI1, SDI1, SDI2, SDI2 1.6 + VSDI/2 VCC - VSDI/2 V 100 2000 mVP-P Differential VCMOUT Output Common Mode Voltage VSDO Reference SDO1, SDO1, SDO2, SDO2 Typ VCC - VSDO V Single-ended, 75 load, RREF1 = 750 1% RREF2 = 750 1% 750 800 850 mVP-P Single-ended, 75 load, RREF1 = 590 1% RREF2 = 590 1% 900 1000 1100 mVP-P Min for SD SD/HD1, SD/HD2 Max for HD 2.4 V 0.8 3.7 V A SD/HD1 = 0, SD/HD2 = 0, (Note 5) 90 98 mA SD/HD1 = 1, SD/HD2 = 1, (Note 5) 76 86 mA Typ Max Units 1485 Mbps AC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 3). Symbol Parameter Conditions Reference DRSDI Input Data Rate (Note 4) SDI1, SDI1, SDI2, SDI2 tjit Additive Jitter 1.485 Gbps SDO1, SDO1, SDO2, SDO2 270 Mbps tr,tf Output Rise Time, Fall Time Min SD/HD1 = 0, SD/HD2 = 0, 20% - 80%, (Note 6) SD/HD1 = 1, SD/HD2 = 1, 20% - 80%, (Note 6) Mismatch in Rise/Fall Time (Note 4) tOS Output Overshoot (Note 4) RLSDO Output Return Loss (Note 7) 400 26 psP-P 18 psP-P 120 220 ps 560 800 ps 30 ps 8 15 20 % dB Note 1: "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be guaranteed. The stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values. The table of "Electrical Characteristics" specifies acceptable device operating conditions. Note 2: Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated referenced to VEE = 0 Volts. Note 3: Typical values are stated for VCC = +3.3V and TA = +25C. Note 4: Specification is guaranteed by characterization. 3 www.national.com LMH0202 Absolute Maximum Ratings (Note 1) LMH0202 Note 5: Maximum ICC is measured at VCC = +3.465V and TA = +70C. Note 6: Specification is guaranteed by characterization and verified by test. Note 7: Output return loss is dependent on board design. The LMH0202 meets this specification on the SD202 evaluation board from 5MHz to 1.5GHz. Pin Descriptions Pin # Name Description 1 SDI1 Serial data true input. 2 SDI1 Serial data complement input. 3 VEE1 Negative power supply (ground). 4 RREF1 Output driver level control. Connect a resistor to VCC to set output voltage swing. 5 SDI2 Serial data true input. 6 SDI2 Serial data complement input. 7 VEE2 Negative power supply (ground). 8 RREF2 Output driver level control. Connect a resistor to VCC to set output voltage swing. 9 VCC2 Positive power supply (+3.3V). 10 SD/HD2 Output slew rate control. Output rise/fall time complies with SMPTE 292M when low and SMPTE 259M when high. 11 SDO2 Serial data complement output. 12 SDO2 Serial data true output. 13 VCC1 Positive power supply (+3.3V). 14 SD/HD1 Output slew rate control. Output rise/fall time complies with SMPTE 292M when low and SMPTE 259M when high. 15 SDO1 Serial data complement output. 16 SDO1 Serial data true output. Device Operation INPUT INTERFACING The LMH0202 accepts either differential or single-ended input. The inputs are self-biased, allowing for simple AC or DC coupling. DC-coupled inputs must be kept within the specified common-mode range. SDI and SDI are self-biased at approximately 2.1V with VCC = 3.3V. Figure 1 shows the differential input stage for SDI and SDI. 20173104 FIGURE 1. Differential Input Stage for SDI and SDI. www.national.com 4 (Continued) OUTPUT INTERFACING DVB-ASI APPLICATIONS The LMH0202 uses current mode outputs. Single-ended output levels are 800 mVP-P into 75 AC-coupled coaxial cable (with RREF = 750). Output level is controlled by the value of the resistor connected between the RREF pin and VCC. The RREF resistor should be placed as close as possible to the RREF pin. In addition, the copper in the plane layers below the RREF network should be removed to minimize parasitic capacitance. The dual differential inputs of the LMH0202 may be externally routed to a single differential input as shown in Figure 2. This provides a solution for DVB-ASI applications where two non-inverted outputs are needed. OUTPUT SLEW RATE CONTROL The LMH0202 output rise and fall times are selectable for either SMPTE 259M or SMPTE 292M compliance via the SD/HD pin. For slower rise and fall times, or SMPTE 259M compliance, SD/HD is set high. For faster rise and fall times, or SMPTE 292M compliance, SD/HD is set low. 20173103 FIGURE 2. Single Differential Input for DVB-ASI 5 www.national.com LMH0202 Device Operation LMH0202 Dual SMPTE 292M / 259M Serial Digital Cable Driver Physical Dimensions inches (millimeters) unless otherwise noted 16-Pin TSSOP Order Number LMH0202MT NS Package Number MTC16 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C2) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/quality/green. Lead free products are RoHS compliant. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560