F-213 (R) (0,50 mm) .0197" (0,80 mm) .0315" EQCD-040-04.00-TTL-STR-2 HQCD, EQCD SERIES HQCD-030-06.00-TED-TED-1-F (R) Q STRIP COAX CABLE ASSEMBLIES SPECIFICATIONS For complete specifications see www.samtec.com?HQCD or www.samtec.com?EQCD Cable: 38 AWG micro ribbon coax cable FILE NO. E111594 Signal Routing: 50 Single-Ended Overall Length: (95,3 mm) 03.75" to (1 m) 40" standard Cable Flexing Life: >10,000 cycles Cable Bending Radius: <2,5mm Plating: Au over 50" (1,27 m) Ni Current Rating: 300 milliamp max per contact Cable Propagation Delay: 4.79 nsec/meter Operating Temp Range: -25C to +105C Unmating Force (-RT1 option): -RT1 option increases unmating force up to 50% RoHS Compliant: Yes HQCD Mates with: QTH, QSH EQCD Mates with: QTE, QSE Surface Mount, Edge Mount or Panel Mount (R) Socket or Terminal 38 AWG micro ribbon coax cable * Screw & panel mount options 0,50 mm or 0,80 mm pitch * Retention pins Cable Length 39.37" (1 m) Rated @ 7dB Insertion Loss EQCD HQCD Screw Mount options 1.92 GHz / 3.84 Gbps 1.71 GHz / 3.42 Gbps Performance and complete test data available at www.samtec.com?EQCD, www.samtec.com?HQCD or contact sig@samtec.com NO. OF POSITIONS PER ROW TYPE WIRE LENGTH APPLICATIONS -030, -060, -090, -120 (12,70) .500 (16,56) .652 (9,28) .365 HQCD (HQCD Series) = (0,50 mm) .0197" pitch -020, -040, -060, -080 EQCD (EQCD Series) = (0,80 mm) .0315" pitch -"XX.XX" = Wire Length in Inches (43,7 mm) 01.72" minimum SCREW MOUNT APPLICATIONS (-F, -S, -B) OAL = Wire Length + L Processing conditions will affect mated height. Wire Length (1,27) .050 APPLICATION SPECIFIC * Other sizes and lengths * Other terminations * Other wire AWG Contact Samtec SO-0318-04-01-02 SO-0165-04-01-02 #4-40 Thread Note: Cable lengths longer than 40.00" (1 meter) are not supported with S.I. test data. Note: Verify part number with Samtec's Interactive Cable Builder at www.samtec.com/ cable_builder/pitch.aspx END NO. 1 (-STL SHOWN) END NO. 2 (-SEU SHOWN) Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM END TO END Surface Mount to Surface Mount Surface Mount to Edge Mount (Terminal) Surface Mount to Edge Mount (Socket) Edge Mount (Terminal) to Edge Mount (Terminal) Edge Mount (Terminal) to Edge Mount (Socket) Edge Mount (Socket) to Edge Mount (Socket) L (24,13) .950 (21,21) .835 (20,47) .806 (18,29) .720 (17,55) .691 (16,81) .662 HQCD-030-06.00-STR-TTR-1-B EQCD-020-40.00-TPU-TTR-1 EQCD-020-06.00-TTR-STR-1-D RETENTION PIN APPLICATIONS (-L, -R, -D) PANEL MOUNT END OPTION APPLICATIONS (-TPU, -TPD, -SPU, SPD) Retention pin option can increase unmating force up to 50% END NO. 1 Panel Mount options #4-40 Thread END NO. 2 Specify END ASSEMBLIES from chart WIRING OPTION END OPTIONS -1 Leave blank for no Screw Mount & Retention End Option = Pin 1 to Pin 1 -2 = Pin 1 to Pin 2 -3 END 1 or END 2 EDGE MOUNT TEU Terminal, Edge Mount, Notch Up = Pin 1 to Second to Last Pin -4 = Pin 1 to Last Pin -F = Screw Mount End No. 1 only (N/A with XPX options) -S = Screw Mount End No. 2 only -B = Screw Mount Both Ends (N/A with XPX options) SEU Terminal, Edge Mount, Notch Down Socket, Edge Mount, Notch Up END 1 or END 2 SED Socket, Edge Mount, Notch Down TTR Terminal, Top Mount, Notch Right -L TTL Terminal, Top Mount, Notch Left = End No. 1 Retention Pin or Socket TBR Terminal, Bottom Mount, Notch Right TBL Terminal, Bottom Mount, Notch Left TPU Terminal, Panel Mount, Notch Up STR Socket, Top Mount, Notch Right TPD Terminal, Panel Mount, Notch Down STL Socket, Top Mount, Notch Left SPU Socket, Panel Mount, Notch Up SBR Socket, Bottom Mount, Notch Right SPD Socket, Panel Mount, Notch Down SBL Socket, Bottom Mount, Notch Left TED END 1 ONLY PANEL MOUNT (Not available on HQCD 120 position and EQCD 80 positions) SURFACE MOUNT WWW.SAMTEC.COM (N/A on 80 positions EQCD and 120 position HQCD) -R = End No. 2 Retention Pin or Socket -D = Both Ends Retention Pin or Socket -1 = End No. 1 Screw Mount. End No. 2 Retention Pin or Socket -2 = End No. 1 Retention Pin or Socket. End No. 2 Screw Mount Option