ATC 700 B Series NPO Porcelain and Ceramic Multilayer Capacitors * Case B Size (.110" x .110") * Capacitance Range 0.1 pF to 5100 pF * Low ESR/ESL * Zero TCC * Low Noise * High Self-Resonance * Rugged Construction * Established Reliability (QPL) * Extended WVDC up to 1500 VDC ATC, the industry leader, is announcing new improved ESR/ESL performance for the 700 B Series RF/Microwave Capacitors. The superior high self-resonance and zero TCC characteristic of this Series provide excellent performance over a broad range of RF and microwave applications requiring minimum drift, including RF power. Porcelain and ceramic construction provide a rugged, hermetic package. ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): Greater than 10,000 (0.1 pF to 200 pF) @ 1 MHz. Greater than 2000 (220 pF to 1000 pF) @ 1 MHz. Greater than 2000 (1100 pF to 5100 pF) @ 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): 0 30 PPM/C (-55C to +125C) INSULATION RESISTANCE (IR): 0.1 pF to 470 pF: 106 Megohms min. @ +25C at rated WVDC. 5 Megohms min. @ +125C at rated WVDC. 10 Typical functional applications: Bypass, Coupling, Tuning and DC Blocking. 510 pF to 5100 pF: Typical circuit applications: Filters, Oscillators, Timing and RF Power 105 Megohms min. @ +25C at rated WVDC. Amplifiers. 104 Megohms min. @ +125C at rated WVDC. WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2. ENVIRONMENTAL TESTS DIELECTRIC WITHSTANDING VOLTAGE (DWV): ATC 700 B Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. 250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds. 150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds. 120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A. MOISTURE RESISTANCE: RETRACE: Less than (0.02% or 0.02 pF), whichever is greater. MIL-STD-202, Method 106. AGING EFFECTS: None LOW VOLTAGE HUMIDITY: PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure). MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125C. 200% WVDC applied. Voltage Applied: 200% of WVDC for capacitors rated at 500 volts DC or less. 120% of WVDC for capacitors rated at 1250 volts DC or less. 100% of WVDC for capacitors rated above 1250 volts DC. CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater. OPERATING TEMPERATURE RANGE: 0.1 to 200 pF: from -55C to +175C 220 to 5100 pF: from -55C to +125C TERMINATION STYLES: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-814 Rev.T, 4/18 ATC 700 B Capacitance Values 1500 VOLT 33 36 39 43 47 51 500 56 62 68 75 82 91 F, G, J 100 110 K, M 120 130 300 150 160 180 200 220 240 200 270 300 1500 EXT 330 360 390 430 470 510 560 620 680 750 820 910 101 111 121 131 151 161 181 201 221 241 271 301 RATED WVDC CAP. CAP. STD. EXT. CODE (pF) VOLTAGE 3.3 3.6 3.9 4.3 4.7 B, C, D 5.1 5.6 6.2 6.8 7.5 B, C, J 8.2 K, M 9.1 10 500 11 12 13 15 16 F, G, J, K, M 18 20 22 24 27 30 TOL. 1000 EXTENDED 1500 RATED WVDC CAP. CAP. STD. EXT. CODE (pF) EXTENDED VOLTAGE 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 200 220 240 270 300 EXTENDED VOLTAGE 0.1 B 0.2 0.3 B, C 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 B, C, D 500 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.4 2.7 3.0 EXTENDED VOLTAGE 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 TOL. EXTENDED VOLTAGE RATED WVDC CAP. CAP. CAP. CAP. TOL. CODE (pF) STD. EXT. CODE (pF) N/A 331 361 391 431 471 511 561 621 681 751 821 911 102 112 122 152 182 222 272 302 332 392 472 512 TOL. RATED WVDC STD. 330 360 390 200 430 470 510 560 620 680 750 820 150 910 F, G, J 1000 1100 K, M 1200 1500 1800 2200 50 2700 3000 3300 3900 4700 5100 EXT. N/A VRMS = 0.707 x WVDC * SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY. Capacitance values in bold type indicate porcelain dielectric. All other capacitance values indicate ceramic dielectric. All 700 B Capacitors are available laser marked with ATC's identification, capacitance code and tolerance. NOTE: EXTENDED WVDC DOES NOT APPLY TO CDR PRODUCTS. ATC PART NUMBER CODE ATC700 B 33 1 J W 500 X T Series Packaging T - Tape and Reel, 1000 pc. qty.* TV - Vertical Orientation of Product, Tape and Reel, 1000 pc. qty.* I - Special Packaging. Consult Factory. *Consult ATC for other quantities Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. ATC Cap-Pac(R) packaging (100 pc. qty. std.) is also available. For this option, leave last field blank. Capacitance Tolerance Laser Marking CAPACITANCE TOLERANCE Code B Tol. 0.1 pF C D 0.25 pF 0.5 pF F G 1% 2% J K WVDC Termination Code M 5% 10% 20% The above part number refers to a 700 B Series (case size B) 330 pF capacitor, J tolerance (5%), 500 WVDC, with W termination (Tin/Lead, Solder Plated over Nickel Barrier), laser marking and ATC Cap-Pac(R) packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N 2 ATC North America sales@atceramics.com For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for additional performance data. T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 700 B Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE BODY DIMENSIONS INCHES (mm) OUTLINES MIL-PRF55681 CASE SIZE & TYPE W/T IS A TERMINATION SURFACE W CDR14BP L P CDR14BP Pellet L T Heavy Tin / Lead Coated, over Nickel Barrier Termination T .110 +.020 -.010 .110 .015 (2.79 (2.79 0.38) +0.51 -0.25) T .110 +.020 -.010 .110 .015 (2.79 (2.79 0.38) +0.51 -0.25) Y 700B T N/A B W Solderable Nickel Barrier L Y 700B 700B CA MS CDR13BP CDR21BP B Gold Chip W L MATERIALS .110 +.035 -.010 .110 .015 (2.79 (2.79 0.38) +0.89 -0.25) W B OVERLAP (Y) T Y 700B THICKNESS (T) Tin / Lead, Solder Plated over Nickel Barrier Termination W B Solder Plate WIDTH (W) .110 +.020 -.010 .110 .015 (2.79 (2.79 0.38) +0.51 -0.25) Y 700B LENGTH (L) LEAD AND TERMINATION DIMENSIONS AND MATERIALS B .102 (2.59) .015 (0.38) max. .010 (0.25) RoHS Compliant Tin Plated over Nickel Barrier Termination RoHS Compliant Gold Plated over Nickel Barrier Termination .120 (3.05) max. Length ( LL ) Width Thickness ( WL ) ( TL ) .250 (6.35) min. .093 .005 (2.36 0.13) .500 (12.7) min. #26 AWG., .016 (.406) dia. nominal Microstrip 700B AR CDR22BP B .135 .015 (3.43 0.38) Axial Ribbon 700B 700B 700B RR RW AW CDR24BP CDR23BP CDR25BP .110 .015 (2.79 0.38 B Radial Ribbon B Radial Wire .004 .001 (.102 .025) N/A .102 (2.59) max. .145 .020 (3.68 0.51) B Axial Wire Additional lead styles available: Narrow Microstrip (NM), Narrow Axial Ribbon (NA) and Vertical Narrow Microstrip (H). Other lead lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. For a complete military catalog, request American Technical Ceramics document ATC 001-818. A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 3 ATC 700 B Capacitors: Non-Magnetic Mechanical Configurations ATC SERIES & CASE SIZE 700B 700B 700B 700B 700B 700B 700B 700B MIL-PRF55681 WN Meets Requirements PN TN MN AN RN BN CASE SIZE & TYPE Meets Requirements Meets Requirements Meets Requirements Meets Requirements Meets Requirements W/T IS A TERMINATION SURFACE B Non-Mag Solder Plate Solderable Barrier T W L MATERIALS .110 +.025 -.010 .110 .015 (2.79 (2.79 0.38) +0.64 -0.25) Y B Non-Mag OVERLAP (Y) T W L THICKNESS (T) .110 Heavy Tin / Lead Coated, over +.035 -.010 .110 .015 .102 (2.59) .015 (0.38) Non-Magnetic Barrier (2.79 (2.79 0.38) max. .010 (0.25) Termination +0.89 -0.25) Y B Non-Mag Pellet WIDTH (W) T W L LENGTH (L) LEAD AND TERMINATION DIMENSIONS AND MATERIALS .110 +.025 -.010 .110 .015 (2.79 (2.79 0.38) +0.64 -0.25) Y Meets Requirements Meets Requirements FN BODY DIMENSIONS INCHES (mm) OUTLINES ATC TERM. CODE * B Tin / Lead, Solder Plated over Non-Magnetic Barrier Termination RoHS Compliant Tin Plated over Non-Magnetic Barrier Termination .120 (3.05) max. Non-Mag Microstrip Length ( LL ) Width Thickness ( WL ) ( TL ) .250 (6.35) min. .093 .005 (2.36 0.13) .500 (12.7) min. #26 AWG., .016 (.406) dia. nominal B .135 .015 (3.43 0.38) Non-Mag Axial Ribbon .110 .015 (2.79 0.38) B Non-Mag Radial Ribbon .004 .001 (.102 .025) N/A .106 (2.69) max. B Non-Mag Radial Wire .145 .020 (3.68 0.51) B Non-Mag Axial Wire *Capacitors with values greater than 200 pF contain a trace magnetic element that may exhibit weak magnetic properties. **Additional lead styles available: Narrow Microstrip (DN), Narrow Axial Ribbon (GN) and Vertical Narrow Microstrip (HN). Other lead lengths are available; consult factory; All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions Dimensions are in inches. A M E R I C A N 4 ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 700 B Performance Data Q VS. CAPACITANCE ATC SERIES 700, CASE B Q ESR (Ohms) ESR VS. CAPACITANCE ATC SERIES 700, CASE B CAPACITANCE (pF) (1.0 pF to 51 pF) CAPACITANCE (pF) (1.0 pF to 51 pF) Q VS. CAPACITANCE ATC SERIES 700, CASE B Q ESR (Ohms) ESR VS. CAPACITANCE ATC SERIES 700, CASE B CAPACITANCE (pF) (56 pF to 200 pF) ESR VS. CAPACITANCE ATC SERIES 700, CASE B Q VS. CAPACITANCE ATC SERIES 700, CASE B Q ESR (Ohms) CAPACITANCE (pF) (56 pF to 200 pF) CAPACITANCE (pF) (220 pF to 5100 pF) CAPACITANCE (pF) (220 pF to 5100 pF) A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 5 ATC 700 B Performance Data CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE B FREQUENCY (GHz) RMS CURRENT (Amps) SERIES RESONANCE VS. CAPACITANCE ATC SERIES 700, CASE B CAPACITANCE (pF) (0.1 pF to 51 pF) CAPACITANCE (pF) CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE B RMS CURRENT (Amps) RMS CURRENT (Amps) CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE B CAPACITANCE (pF) (220 pF to 5100 pF) CAPACITANCE (pF) (56 pF to 200 pF) % CHANGE IN CAPACITANCE CAPACITANCE CHANGE VS. TEMPERATURE ATC SERIES 700, CASE B TEMPERATURE (Degrees C) A M E R I C A N 6 ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 700 B Performance Data CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE B, EXTENDED VOLTAGE 100 The current rating is based on a 65 C mounting surface with a device thermal resistance of 20 C/W. A power dissipation of 3 W will result in a case temperature of 125 C. RMS CURRENT (Amps) RMS CURRENT (Amps) 100 CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE B, EXTENDED VOLTAGE 10 1000 MHz 500 MHz 30 MHz 150 MHz 1 Dotted Line = Power dissipation limited Solid line = Voltage limited (Vrms) 0.1 0.1 1 10 100 The current rating is based on a 65C mounting surface with a device thermal resistance of 20C/W. A power dissipation of 3 W will result in a case temperature of 125C. 30 MHz 150 MHz 10 500 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 1 10 ATC North America sales@atceramics.com 100 1000 CAPACITANCE (pF) (56 pF to 200 pF) CAPACITANCE (pF) (0.1 pF to 51 pF) A M E R I C A N 1000 MHz T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 7 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1996 American Technical Ceramics Corp. All Rights Reserved A M E R I C A N ATC North America sales@atceramics.com ATC # 001-814 Rev. T, 4/18 T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om