PLA10AS4330R3R2M - Murata Manufacturing Co., Ltd.

http://www.murata.com/

Data Sheet

Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product

specifications or transact the approval sheet for product specifications before ordering.

o This data sheet is applied for AC Line Filters Common Mode Choke Coil used for General Electronics equipment for your design.

2007.7.4

Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Common Mode Choke Coil

AC Line Filters Common Mode Choke Coil

PLA10 Series (Safety Standard Recognized)

PLA10AS3030R4R2p30.0mH 0.4A 250V 100M ohm

PLA10AS4330R3R2p43.0mH 0.3A 250V 100M ohm

(in mm)

17.5 max.

18 max.

13±0.5 10±0.5

16 max.

ø0.9 max.

3.5±1

(1)

[(2)]

(4)

[(3)]

(4)

[(1)]

(3)

[(2)] 0.1 1 10 100

0.01

Frequency (MHz)

PLA10AS1522R0R2

PLA10AS1821R7R2

PLA10AS2221R5R2

PLA10AS3021R3R2

PLA10AS3521R2R2

PLA10AS5521R0R2

Insertion Loss (dB)

PLA10AS7420R8R2

PLA10AS1030R7R2

PLA10AS1230R6R2

PLA10AS2030R5R2

PLA10AS3030R4R2

PLA10AS4330R3R2

■ Dimension ■ Insertion Loss Characteristics

■ Rated Value (p: packaging code)

Part Number Common Mode Inductance (min.) Rated Current Rated Voltage Insulation Resistance (min.)

PLA10AS1522R0R2p1.5mH 2.0A 250V 100M ohm

PLA10AS1821R7R2p1.8mH 1.7A 250V 100M ohm

PLA10AS2221R5R2p2.2mH 1.5A 250V 100M ohm

PLA10AS3021R3R2p3.0mH 1.3A 250V 100M ohm

PLA10AS3521R2R2p3.5mH 1.2A 250V 100M ohm

PLA10AS5521R0R2p5.5mH 1.0A 250V 100M ohm

PLA10AS7420R8R2p7.4mH 0.8A 250V 100M ohm

PLA10AS1030R7R2p10.0mH 0.7A 250V 100M ohm

PLA10AS1230R6R2p12.0mH 0.6A 250V 100M ohm

PLA10AS2030R5R2p20.0mH 0.5A 250V 100M ohm

Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 60°C

Winding Temperature Rise (at Rated Current) (max.): 60K

PLA10 Series (Safety Standard Recognized) Standard Winding Type

Continued on the following page.

Continued from the preceding page.

http://www.murata.com/

Data Sheet

Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product

specifications or transact the approval sheet for product specifications before ordering.

o This data sheet is applied for AC Line Filters Common Mode Choke Coil used for General Electronics equipment for your design.

2007.7.4

Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Common Mode Choke Coil

PLA10 Series (Safety Standard Recognized) Sectional Winding Type

Continued on the following page.

(in mm)

17.5 max.

16 max.18 max.

13±0.5 10±0.5

ø0.9 max.

3.5±1

(1) (4)

[(2)]

(4)

[(1)]

(3)

[(2)][(3)] 0.1 1 10 100

0.01

Frequency (MHz)

Insertion Loss (dB)

PLA10AS9012R0D2

PLA10AS1321R7D2

PLA10AS1821R5D2

PLA10AS2021R3D2

PLA10AS3621R0D2

PLA10AS7720R7D2

PLA10AS1330R5D2

PLA10AS2230R4D2

PLA10AS3630R3D2

■ Dimension ■ Insertion Loss Characteristics

■ Rated Value (p: packaging code)

Part Number Common Mode Inductance (min.) Rated Current Rated Voltage Insulation Resistance (min.)

PLA10AS9012R0D2p0.9mH 2.0A 250V 100M ohm

PLA10AS1321R7D2p1.3mH 1.7A 250V 100M ohm

PLA10AS1821R5D2p1.8mH 1.5A 250V 100M ohm

PLA10AS2021R3D2p2.0mH 1.3A 250V 100M ohm

PLA10AS3621R0D2p3.6mH 1.0A 250V 100M ohm

PLA10AS7720R7D2p7.7mH 0.7A 250V 100M ohm

PLA10AS1330R5D2p13.0mH 0.5A 250V 100M ohm

PLA10AS2230R4D2p22.0mH 0.4A 250V 100M ohm

PLA10AS3630R3D2p36.0mH 0.3A 250V 100M ohm

(1)

(4)

(2)

(3)

N1 : N2 = 1 : 1

No polarity.

Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 60°C

Winding Temperature Rise (at Rated Current) (max.): 60K

■ Equivalent Circuit ■ Packaging

Code Packaging Minimum Quantity

MMagazine 1800

BBox 1260

Continued from the preceding page.

http://www.murata.com/

Data Sheet

Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product

specifications or transact the approval sheet for product specifications before ordering.

o This data sheet is applied for AC Line Filters Common Mode Choke Coil used for General Electronics equipment for your design.

2007.7.4

Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Common Mode Choke Coil

1. Rated Current

Operating current should not exceed the rated

value. Even if operating current is under the

rated value, adequate ventilation is required to

avoid excessive heat generated within the product

(choke coil) and from surrounding heat sources.

If exceeding these conditions, excessive heat may

cause fumes or permanent damage to the product.

Please ensure that product (choke coil) is

evaluated and confirmed against the specification

when it is mounted in your final assembled product.

-> Winding temperature should be less than

120 degree C.

*As for FKOB series winding temperature should be

less than 95 degree C.

Maximum allowable temperature at the surface of

coil (ambient temperature + winding temperature

rise) is in accordance with each safety standard

applicable to final assembled product.

When the temperature at winding exceeds maximum

allowable temperature of safety standard, the

rated current should be derated.

2. Inrush Current

Inrush current should not exceed 10 times rated

current within 1/4 cycle of 50/60Hz commercial

power line. Inrush current should be limited to a

minimum of 10 seconds after last inrush.

If these conditions are exceeded, excessive heat may

cause fumes or permanent damage to the component,

or at worst cause ignition.

■ !Caution (Rating) Magnetic Flux Leakage

Choke coils generate small amounts of magnetic flux

leakage that may adversely affect equipment operation

according to component arrangement.

Testing should be completed on final assembly to

ensure equipment performance is not affected.

■ Notice (Soldering and Mounting)

Coil Humming Noise

Magnetic flux generated between coil and core or

between the choke coil windings creates repulsive

power between the coil windings. This repulsive

power causes the coil winding to vibrate and create

a humming noise. The amount of hum produced by the

coil is proportionate to the amount of harmonic

distortion generated by the operating current. This

does not influence the electrical performance of

the coils, but it should be considered and tested

in actual circuit application.

■ Notice (Other)