DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X7R 6.3 V TO 50 V 100 pF to 22 F Product Specification - Apr 24, 2009 V.1 RoHS compliant Product specification Surface-Mount Ceramic Multilayer Capacitors SCOPE This specification describes X7R series chip capacitors with leadfree terminations. APPLICATIONS PCs, Hard disk, Game PCs DVDs, Camcorders Mobile phones Data processing FEATURES Supplied in tape on reel Nickel-barrier end termination RoHS compliant Halogen Free compliant General Purpose & High Cap. X7R 6.3 V to 50 V 2 16 ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. Please note that 12 digits ordering code will expire at the end of 2010. YAGEO BRAND ordering code GLOBAL PART NUMBER CC XXXX X X (1) X7R (2) (3) X ( PREFERRED ) BB XXX (4) (5) (1) SIZE - INCH BASED (METRIC) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) (2) TOLERANCE J = 5% (1) K = 10% M = 20% (3) PACKING STYLE R = Paper taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) RATED VOLTAGE 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 103 = 10,000 pF = 10 nF NOTE 1. Tolerance 5% doesn't available for full product range, please contact local sales force before order www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 3 16 PHYCOMP BRAND ordering codes GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER ( PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2 2 XX XX X X X X XX Carrier type 38 = Paper ( 10 V) 22 = Blister ( 10 V) 50 = Blister (6.3 V) 55 = Paper (6.3 V) 54 = Bulk Capacitance value(1) Rated voltage - Termination 20 = 6.3 V 24 = 10 V 78 = 16 V 91 = 25 V 58 = 50 V Temperature characteristic 5 = X7R Tolerance 5 = 5%(2) 6 = 10% 7 = 20% Packaging(3) 1 = reel: 180 mm; 7" 5 = reel: 330 mm; 13" 4 = bulk case YNM0029 Size 8 = 0201 7 = 0402 6 = 0603 0 = 0805 1 = 1206 2 = 1210 4 = 1812 (1) Refer to "Conversion table of capacitance & last 2 digits of 12NC" (2) Tolerance 5% doesn't available for full product range, please contact local sales force before order (3) Quantity on reel depends on thickness classification; see table 5 PHYCOMP CTC CODE ( FOR NORTH AMERICA ) Example: 02012R102K8B20D 0201 2R 102 K 8 B 2 0 D Size code Temp. Char. Capacitance in pF Tolerance Voltage Termination Packing Marking Range identifier 0201 2R = X7R 0402 0603 0805 1206 1210 1812 101 = 100 pF; J = 5% (1) the third digit K = 10% signifies the M = 20% multiplying factor: 0=x1 1 = x 10 2 = x 100 3 = x 1,000 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V B = NiSn 2 = 180 mm / 7" paper 0 = no marking D = Class 2 MLCC 3 = 330 mm 13" paper B = 180 mm 7" blister F = 330 mm 13" blister P = Bulk case NOTE 1. Tolerance 5% doesn't available for full product range, please contact local sales force before order www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 4 16 CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead-free. A cross section of the structure is shown in Fig.1. terminations electrodes MLB457 ceramic material Fig. 1 Surface mounted multilayer ceramic capacitor construction DIMENSION Table 1 For outlines see fig. 2 TYPE 0201 0402 0603 0805 1206 1210 1812 L1 (mm) W (mm) 0.6 0.03 T (MM) L2 / L3 (mm) L4 (mm) min. max. min. 0.3 0.03 0.10 0.20 0.20 1.0 0.05 0.5 0.05 0.20 0.30 .40 1.6 0.10 0.8 0.10 0.20 0.60 0.40 2.0 0.10 (1) 1.25 0.10 (1) 2.0 0.20 (2) 1.25 0.20 (2) 0.25 0.75 0.55 3.2 0.15 (1) 1.6 0.15 (1) Refer to table 2 to 4 0.25 0.75 1.40 3.2 0.20 2.5 0.20 0.25 0.75 1.40 3.2 0.20 0.25 0.75 2.20 4.5 0.40 (2) W L2 1.6 0.20 (2) 4.5 0.20 For dimension see Table 1 T 3.2 0.20 (2) (1) OUTLINES L4 L1 L3 MBB211 Fig. 2 Surface mounted multilayer ceramic capacitor dimension NOTE 1. Dimension for size 0805 to 1812, C < 1 F 2. Dimension for size 0805 to 1812, C 1 F www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 5 16 CAPACITANCE RANGE & THICKNESS FOR X7R Table 2 Sizes from 0201 to 0402 CAP. Last 2 digits of 12NC 100 pF 09 150 pF 12 220 pF 14 330 pF 16 470 pF 18 680 pF 21 1.0 nF 23 1.5 nF 25 2.2 nF 27 3.3 nF 29 4.7 nF 32 6.8 nF 34 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47 nF 45 68 nF 47 100 nF 49 150 nF 52 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 F 63 2.2 F 67 4.7 F 72 10 F 76 22 F 81 0201 6.3 V 0402 10 V 16 V 25 V 6.3 V 10 V 16 V 25 V 50 V 0.30.03 0.50.05 0.50.05 0.30.03 0.30.03 0.50.05 0.30.03 0.50.05 0.50.05 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before order www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 6 16 CAPACITANCE RANGE & THICKNESS FOR X7R Table 3 Sizes from 0603 to 0805 CAP. Last 2 digits of 12NC 100 pF 09 150 pF 12 220 pF 14 330 pF 16 470 pF 18 680 pF 21 1.0 nF 23 1.5 nF 25 2.2 nF 27 3.3 nF 29 4.7 nF 32 6.8 nF 34 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47 nF 45 68 nF 47 100 nF 49 150 nF 52 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 F 63 2.2 F 67 4.7 F 72 10 F 76 22 F 81 0603 6.3 V 0805 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 0.60.1 0.80.1 50 V 0.60.1 0.80.1 0.80.1 0.80.1 0.60.1 0.850.1 0.850.1 0.850.1 0.80.1 1.250.2 1.250.2 0.80.1 0.80.1 1.250.2 1.250.2 1.250.2 0.80.1 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before order www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 7 16 CAPACITANCE RANGE & THICKNESS FOR X7R Table 4 Sizes from 1206 to 1812 CAP. Last 2 digits of 12NC 100 pF 09 150 pF 12 220 pF 14 330 pF 16 470 pF 18 680 pF 21 1.0 nF 23 1.5 nF 25 2.2 nF 27 3.3 nF 29 4.7 nF 32 6.8 nF 34 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47 nF 45 68 nF 47 100 nF 49 150 nF 52 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 F 63 2.2 F 67 4.7 F 72 10 F 76 22 F 81 1206 6.3 V 1210 10 V 16 V 25 V 50 V 10 V 1812 16 V 25 V 50 V 50 V 0.850.1 0.850.1 0.850.1 1.150.1 1.150.1 1.150.1 1.60.2 1.60.2 0.850.1 0.850.1 1.150.1 0.850.1 0.850.1 1.150.1 0.850.1 1.00.1 1.150.1 1.150.1 1.60.2 1.150.1 0.850.1 1.150.1 1.60.2 1.60.2 1.250.2 1.90.2 0.850.1 1.150.1 1.60.2 1.250.2 1.60.2 1.90.2 1.90.2 2.50.2 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before order www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 8 16 THICKNESS CLASSES AND PACKING QUANTITY Table 5 SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL 0201 0.3 0.03 mm 0402 0603 0805 1206 O180 MM / 7 INCH O330 MM / 13 INCH Paper Blister Paper Blister QUANTITY PER BULK CASE 8 mm 15,000 --- 50,000 --- --- 0.5 0.05 mm 8 mm 10,000 --- 50,000 --- 50,000 0.8 0.1 mm 8 mm 4,000 --- 15,000 --- 15,000 0.6 0.1 mm 8 mm 4,000 --- 20,000 --- 10,000 0.85 0.1 mm 8 mm 4,000 --- 15,000 --- 8,000 1.25 0.2 mm 8 mm --- 3,000 --- 10,000 5,000 0.6 0.1 mm 8 mm 4,000 --- 20,000 --- --- 0.85 0.1 mm 8 mm 4,000 --- 15,000 --- --- 1.00 / 1.15 0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.25 0.2 mm 8 mm --- 3,000 --- 10,000 --- 1.6 0.15 mm 8 mm --- 2,500 --- 10,000 --- 1.6 0.2 mm 8 mm --- 2,000 --- 10,000 --- 0.6 / 0.7 0.1 mm 8 mm --- 4,000 --- 15,000 --- 0.85 0.1 mm 8 mm --- 4,000 --- 10,000 --- 1.15 0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.15 0.15 mm 8 mm --- 3,000 --- 10,000 --- 1.25 0.2 mm 8 mm --- 3,000 --- --- --- 1210 1.5 0.1 mm 8 mm --- 2,000 --- --- --- 1.6 / 1.9 0.2 mm 8 mm --- 2,000 --- --- --- 2.0 0.2 mm 8 mm --- 2,000 1,000 --- --- --- 2.5 0.2 mm 8 mm --- 1,000 500 --- --- --- 1.15 0.15 mm 12 mm --- 3,000 --- --- --- 1.25 0.2 mm 12 mm --- 3,000 --- --- --- 1.35 0.15 mm 12 mm --- 2,000 --- --- --- 1.5 0.1 mm 12 mm --- 2,000 --- --- --- 1.6 0.2 mm 12 mm --- 2,000 --- --- --- 2.0 0.2 mm 12 mm --- 2,000 --- --- --- 0.6 / 0.85 0.1 mm 12 mm --- 2,000 --- --- --- 1808 1812 1.15 0.1 mm 12 mm --- 1,500 --- --- --- 1.15 0.15 mm 12 mm --- 1,500 --- --- --- 1.35 0.15 mm 12 mm --- 1,000 --- --- --- 1.5 0.1 mm 12 mm --- 1,000 --- --- --- 1.6 0.2 mm 12 mm --- 1,000 --- --- --- 2.0 0.2 mm 12 mm --- 1,000 --- --- --- 2.5 0.2 mm 12 mm --- 500 50,000 --- --- www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 9 16 ELECTRICAL CHARACTERISTICS X7R DIELECTRIC CAPACITORS; NISN TERMINATIONS Unless otherwise stated all electrical values apply at an ambient temperature of 201 C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. Table 6 VALUE DESCRIPTION Capacitance range 100 pF to 22 F Capacitance tolerance 5%, 10%, 20% Dissipation factor (D.F.) 10 V 5% Exception: 0201 12 nF; 0805 10 F 16 V 10% 3.5% Exception: 0201 1.5 nF; 0402 27 nF; 5% 0603 220 nF; 0805 680 nF; 1206 2.2 F; 1210 10 F 25 V 2.5% Exception: 0402 10 nF; 0603 47 nF; 3.5% 0805 220 nF; 1206 1 F; 1210 4.7 F 0201 560 pF; 0603 1 F; 5% 0805 680 nF; 1206 2.2 F; 1210 10 F 50 V 2.5% Exception: 0201 47 pF; 1206 1 F 0603 47 nF Insulation resistance after 1 minute at Ur (DC) 3.5% 3.0% Rins 10 G or Rins x Cr 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): Operating temperature range: 15% -55 C to +125 C NOTE Capacitance tolerance 5% doesn't available for full product range, please contact local sales force before order www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors C C (%) General Purpose & High Cap. YNM0013 15 C C (%) 10 0 -20 -5 -30 -10 -40 Fig. 3 16 0 -10 -25 6.3 V to 50 V YNM0014 10 5 -15 -55 X7R 10 16 V 10 V 25 V 50 V -50 5 40 65 95 125 T (oC) Typical capacitance change as a function of temperature 0 Fig. 4 10 20 30 40 50 60 VDC (V) Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage at 20 C YNM0018 600 tan (x 10-4) 400 200 16 V 25 V 50 V 0 Fig. 5 -40 0 40 80 120 T (C) Typical tan as a function of temperature www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 11 16 SOLDERING RECOMMENDATION Table 7 SOLDERING METHOD SIZE 0402 0603 0805 1206 1210 Reflow 0.1 F 1.0 F 2.2 F 4.7 F Reflow only Reflow/Wave < 0.1 F < 1.0 F < 2.2 F < 4.7 F --- TESTS AND REQUIREMENTS Table 8 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 6038421/22 4.3 The capacitors may be mounted on printed-circuit boards or ceramic substrates No visible damage Visual inspection and dimension check 4.4 Any applicable method using x 10 magnification In accordance with specification Capacitance 4.5.1 Class 2: f = 1 KHz for C 10 F, measuring at voltage 1 Vrms at 20 C Within specified tolerance f = 120 Hz for C >10 F, measuring at voltage 0.5 Vrms at 20 C Dissipation factor (D.F.) 4.5.2 Class 2: f = 1 KHz for C 10 F, measuring at voltage 1 Vrms at 20 C In accordance with specification f = 120 Hz for C > 10 F, measuring at voltage 0.5 Vrms at 20 C Insulation resistance 4.5.3 At Ur (DC) for 1 minute In accordance with specification Temperature characteristic 4.6 Class 2: Between minimum and maximum temperature X7R: -55 C to +125 C Normal Temperature: 20 C <General purpose series> C/C Class 2: X7R: 15% <High Capacitance series> C/C Class 2: X7R: 15% www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V TEST TEST METHOD PROCEDURE REQUIREMENTS Adhesion IEC 6038421/22 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size 0603: 5N size = 0402: 2.5N size = 0201: 1N 4.8 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm <General purpose series> Bond strength of plating on end face 12 16 C/C Class2: X7R: 10% <High Capacitance series> C/C Class2: X7R: 10% Resistance to soldering heat 4.9 Precondition: 150 +0/-10 C for 1 hour, then keep for 24 1 hours at room temperature Preheating: for size 1206: 120 C to 150 C for 1 minute Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned Preheating: for size >1206: 100 C to 120 C for 1 minute and 170 C to 200 C for 1 minute <General purpose series> Solder bath temperature: 260 5 C Dipping time: 10 0.5 seconds Recovery time: 24 2 hours C/C Class2: X7R: 10% <High Capacitance series> C/C Class2: X7R: 10% D.F. within initial specified value Rins within initial specified value www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 13 16 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability IEC 6038421/22 Preheated the temperature of 80 C to 140 C and maintained for 30 seconds to 60 seconds. The solder should cover over 95% of the critical area of each termination 4.10 Test conditions for lead containing solder alloy Temperature: 235 5 C Dipping time: 2 0.2 seconds Depth of immersion: 10 mm Alloy Composition: 60/40 Sn/Pb Number of immersions: 1 Test conditions for leadfree containing solder alloy Temperature: 245 5 C Dipping time: 3 0.3 seconds Depth of immersion: 10 mm Alloy Composition: SAC305 Number of immersions: 1 Rapid change of temperature 4.11 Preconditioning; 150 +0/-10 C for 1 hour, then keep for 24 1 hours at room temperature 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Recovery time 24 2 hours No visual damage <General purpose series> C/C Class2: X7R: 15% <High Capacitance series> C/C Class2: X7R: 15% D.F. meet initial specified value Rins meet initial specified value www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V TEST TEST METHOD PROCEDURE REQUIREMENTS Damp heat with Ur load IEC 6038421/22 1. Preconditioning, class 2 only: 150 +0/-10 C /1 hour, then keep for 24 1 hour at room temp No visual damage after recovery 2. Initial measure: Spec: refer initial spec C, D, IR C/C 4.13 3. Damp heat test: 500 12 hours at 40 2 C; 90 to 95% R.H. 1.0 Ur applied 4. Recovery: Class 2: 24 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to "IEC 60384 4.1" and then the requirement shall be met. 14 16 <General purpose series> Class2: X7R: 15% D.F. Class2: X7R: 16V: 7% 25V: 5% Rins Class2: X7R: 500 M or Rins x Cr 25s whichever is less <High Capacitance series> C/C Class2: X7R: 20% D.F. Class2: X7R: 2 x initial value max Rins Class2: X7R: 500 M or Rins x Cr 25s whichever is less www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R TEST TEST METHOD PROCEDURE REQUIREMENTS Endurance IEC 6038421/22 1. Preconditioning, class 2 only: 150 +0/-10 C /1 hour, then keep for 24 1 hour at room temp No visual damage 2. Initial measure: Spec: refer initial spec C, D, IR C/C 4.14 3. Endurance test: Temperature: X7R: 125 C Specified stress voltage applied for 1,000 hours: Applied 2.0 x Ur for general product. Applied 1.5 x Ur for high cap. product. 4. Recovery time: 24 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to "IEC 60384 4.1" and then the requirement shall be met. 6.3 V to 50 V 15 16 <General purpose series> Class2: X7R: 15% D.F. Class2: X7R: 16V: 7% 25V: 5% Rins Class2: X7R: 1,000 M or Rins x Cr 50s whichever is less <High Capacitance series> C/C Class 2: X7R: 20% D.F. Class 2: X7R: 2 x initial value max Rins Class 2: X7R: 1,000 M or Rins x Cr 50s whichever is less Voltage proof IEC 603841 4.6 Specified stress voltage applied for 1 minute Ur 100 V: series applied 2.5 Ur 100 V < Ur 200 V series applied (1.5 Ur + 100) 200 V < Ur 500 V series applied (1.3 Ur + 100) Ur > 500 V: 1.3 Ur I: 7.5 mA No breakdown or flashover www.yageo.com Apr 24, 2009 V.1 Product specification Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 16 16 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 1 Apr 24, 2009 - - Ordering code updated Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance X7R series with RoHS compliant - Replace the "6.3V to 50V" part of pdf files: X7R_10V_9, X7R_16V-to100V_9, X7R_16-to-500V_9, UP-X5R_X7R_HighCaps_6.3-to-25V_11, UY-X5R_X7R_HighCaps_6.3-to-25V_11 - Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2 and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen Free compliant" added - Test method and procedure updated www.yageo.com Apr 24, 2009 V.1