1182 TAPE (3/4) - 3M - Datasheet.World

1182 Tap e

Copper Foil Conductive Adhesive on Both

Sides

Data Sheet

Product Description

3M 1182 Tape consi s ts of a 1-ounce dea dsoft

coppe r foil backi ng that is coated on both si des

with a uni que electri ca lly conducti ve pressure-

sensit ive acr yli c adhesive.

• Deadsoft 1-ounce c opper foil bac ki ng

• Conductiv e ac ryl i c adhe si ve on both sides

• Supplied with rem ova ble liner on both sides for

easy handling and di ec utti ng

Like al l 3M shieldi ng tape s, 3M 1182 is availabl e

in sta ndard and custom widths a nd le ngths.

Standard length is 18 yards.

• Widths f r om 1/ 4” to 23”

• Longer lengths up to seve ral times normal

le ngth, depende nt upon w i dth. Check with

Customer Service.

Applications

3M 1182 is typica lly use d to bond two surfaces

together, both electrically and physically. An

exa mple would be adheri ng a conductive ga sket

to a conduc ti ve surface as part of the EMI

shie l di ng sol ution for an electroni c e nclosure.

Conductivity

Sinc e 3M 1182 double- si ded copper tape would

typically be used as an electrical path between

two surfaces, its most important feature is its

conduc tivi ty. Highly conduc ti ve par ti c le s i n the

acrylic adhesive provide a m ul titude of electri ca l

paths between the ap plica ti on substrate and the

surface of the copper foil on each side. The

resi stance of the conductive path through the

adhesive (measured over a 1-in2 area) typically

measures only a few milliohm s.

Properties Typical Values

Ba c king thickness 11. 4 mil (0,04mm)

Total thickn ess (backing plus adhesive on both sides) 33.5 mil (.088mm)

Breaking strength 1 25 lb./in (44 N/10mm)

Adhesion to steel 1 35 oz/in (3, 8 N/10mm)

Electrical resistance thro ugh adhesive 2 0.010 ohm

Flame re tard ancy 3 Pass

* Footnote: 1. Test method ASTM D 1000

2. MIL- STD-202 Me thod 307 m aintained at 5 psi (3, 4 N /cm2) measured over 1 in2 su rface area . C on ducti ve particle s in t h e adh e siv e provide the

electrical path between the application substrate and the foi l backi ng.

3. UL- r ecognized fo r flame ret ardancy per UL 510, Product C atego ry 0ANZ 2, File E17385.

3M is a trademark of 3M.

Important Notice

All statements, te chnica l info rmat ion and recommen dations

related to the Seller’s products are based on information believed

to be reliable, but the accuracy or completeness thereof is not

guaranteed. Before utilizing the product, the user should

determine the suitability of the product for its intended use. The

user a ssumes all risks and liabil ity whatsoe ver in connection with

such use.

Any statements or recommendations of the Seller which are not

contained in the Seller’s current publications shall have no force

or effect unless contained in an agreement signed by an

authorized officer of the Seller. The statements contained herein

are m ad e in li eu of al l w arra nties , ex pr es s ed or im pl ie d, inc l ud in g

but not limited to the implied warranties of merchantability and

fitness for a particular purpose which warranties are hereby

expressly disclaimed.

SELLER SHALL NOT BE LIABLE TO THE USER OR ANY

OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING

BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY,

FOR ANY INJURY OR FOR ANY DIRECT, INDIRECT, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES SUSTAINED

OR INCURRED BY REASON OF THE USE OF ANY OF THE

SELLER’S PRODUCTS THAT WERE DEFECTIVE.

Electrical Products Division

6801 R iver P la ce Blvd.

Aust in , TX 78726-9000

800 676 8381

78-8124-4703-1