SFH617A Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 C Rated FEATURES A 1 4 C C 2 3 E 17907 DESCRIPTION The 110 C rated SFH617A (DIP) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC. Specifications subject to change. * Operating temperature from - 55 C to + 110 C * Good CTR linearity depending on forward current * Isolation test voltage, 5300 VRMS * High collector emitter voltage, VCEO = 70 V * Low saturation voltage * Fast switching times * Low CTR degradation * Temperature stable * Low coupling capacitance * End stackable, 0.100" (2.54 mm) spacing * High common mode interference immunity * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS * * * * * AC adapter SMPS PLC Factory automation Game consoles AGENCY APPROVALS * UL1577, file no. E52744 system code H or J, double protection * CSA 93751 * DIN EN 60747-5-5 (VDE 0884) available with option 1 * BSI IEC 60950; IEC 60065 * FIMKO ORDER INFORMATION PART REMARKS SFH617A-1 CTR 40 to 80 %, DIP-4 SFH617A-2 CTR 63 to 125 %, DIP-4 SFH617A-3 CTR 100 to 200 %, DIP-4 SFH617A-4 CTR 160 to 320 %, DIP-4 SFH617A-1X006 CTR 40 to 80 %, DIP-4 400 mil SFH617A-2X006 CTR 63 to 125 %, DIP-4 400 mil SFH617A-2X009 CTR 63 to 125 %, SMD-4 SFH617A-3X006 CTR 100 to 200 %, DIP-4 400 mil SFH617A-3X007 CTR 100 to 200 %, SMD-4 SFH617A-4X006 CTR 160 to 320 %, DIP-4 400 mil Note For additional information on the available options refer to option information. www.vishay.com 644 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83740 Rev. 1.8, 10-Dec-08 SFH617A Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 C Rated ABSOLUTE MAXIMUM RATINGS PARAMETER Vishay Semiconductors (1) TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V DC forward current IF 60 mA IFSM 2.5 A 0.95 mW/C t 10 s Surge forward current Derate linearly from 25 C OUTPUT Collector emitter voltage VCE 70 V Emitter collector voltage VEC 7 V IC 50 mA IC 100 mA 1.54 mW/C VISO 5300 VRMS VIO = 500 V, Tamb = 25 C RIO VIO = 500 V, Tamb = 100 C RIO 1011 Tstg - 55 to + 150 C Tamb - 55 to + 110 C Tsld 260 C Collector current t 1.0 ms Derate linearly from 25 C COUPLER Isolation test voltage between emitter and detector Isolation resistance Storage temperature range Ambient temperature range max. 10 s, dip soldering distance to seating plane 1.5 mm Soldering temperature (2) 1012 Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). Ptot - Power Dissipation (mW) 200 150 Detector 100 LED 50 0 0 18778 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 1 - Permissible Power Dissipation vs. Ambient Temperature Document Number: 83740 Rev. 1.8, 10-Dec-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 645 SFH617A Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 C Rated THERMAL CHARACTERISTICS (1) TEST CONDITION SYMBOL VALUE UNIT LED power dissipation PARAMETER at 25 C Pdiss 100 mW Output power dissipation at 25 C Pdiss 150 mW Maximum LED junction temperature Tjmax 125 C Maximum output die junction temperature Tjmax 125 C Thermal resistance, junction emitter to board EB 173 C/W Thermal resistance, junction emitter to case EC 149 C/W Thermal resistance, junction detector to board DB 111 C/W Thermal resistance, junction detector to case DC 127 C/W Thermal resistance, junction emitter to junction detector ED 95 C/W Thermal resistance, board to ambient (2) BA 195 C/W Thermal resistance, case to ambient (2) CA 3573 C/W Notes (1) The thermal model is represented in the thermal network below. Each resistance value given in this model can be used to calculate the temperatures at each node for a given operating condition. The thermal resistance from board to ambient will be dependent on the type of PCB, layout and thickness of copper traces. For a detailed explanation of the thermal model, please reference Vishay's thermal characteristics of optocouplers application note. (2) For 2 layer FR4 board (4" x 3" x 0.062). TA CA Package TC EC DC DE TJD TJE DB EB TB BA 19996 TA ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 60 mA VF 1.25 1.65 V Reverse current VR = 6 V IR 0.01 10 A VR = 0 V, f = 1 MHz CO 13 Capacitance pF OUTPUT Collector emitter capacitance Collector emitter leakage current www.vishay.com 646 VCE = 5 V, f = 1 MHz VCE = 10 V CCE 5.2 SFH617A-1 ICEO 2 SFH617A-2 ICEO SFH617A-3 ICEO SFH617A-4 ICEO For technical questions, contact: optocoupler.answers@vishay.com pF 50 nA 2 50 nA 5 100 nA 5 100 nA Document Number: 83740 Rev. 1.8, 10-Dec-08 SFH617A Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 C Rated Vishay Semiconductors ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT VCEsat 0.4 0.25 V 0.4 pF COUPLER Collector emitter saturation voltage IF = 10 mA, f = 1 MHz Coupling capacitance CC Note Tamb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 10 mA, VCE = 5 V IC/IF IF = 1 mA, VCE = 5 V PART SYMBOL MIN. SFH617A-1 CTR 40 TYP. MAX. 80 UNIT % SFH617A-2 CTR 63 125 % SFH617A-3 CTR 100 200 % SFH617A-4 CTR 160 320 % SFH617A-1 CTR 13 30 % SFH617A-2 CTR 22 45 % SFH617A-3 CTR 34 70 % SFH617A-4 CTR 56 90 % MIN. TYP. SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MAX. UNIT NON-SATURATED Turn-on time IF = 10 mA, VCC = 5 V, RL = 75 ton 3 Rise time IF = 10 mA, VCC = 5 V, RL = 75 tr 2 s Turn-off time IF = 10 mA, VCC = 5 V, RL = 75 toff 2.3 s Fall time IF = 10 mA, VCC = 5 V, RL = 75 tf 2 s IF = 10 mA, VCC = 5 V fctr 250 kHz Cut-off frequency s SATURATED IF = 20 mA Turn-on time Rise time IF = 10 mA SFH617A-1 ton 3 s SFH617A-2 ton 4.2 s SFH617A-3 ton 4.2 s IF = 5 mA SFH617A-4 ton 6 s IF = 20 mA SFH617A-1 tr 2 s SFH617A-2 tr 3 s IF = 10 mA SFH617A-3 tr 3 s IF = 5 mA SFH617A-4 tr 4.6 s IF = 20 mA SFH617A-1 toff 18 s SFH617A-2 toff 23 s SFH617A-3 toff 23 s IF = 5 mA SFH617A-4 toff 25 s IF = 20 mA SFH617A-1 tf 11 s SATURATED Turn-off time Fall time IF = 10 mA IF = 10 mA IF = 5 mA Document Number: 83740 Rev. 1.8, 10-Dec-08 SFH617A-2 tf 14 s SFH617A-3 tf 14 s SFH617A-4 tf 15 s For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 647 SFH617A Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 C Rated Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Climatic classification (according to IEC 68 part 1) TYP. MAX. UNIT 55/100/21 Comparative tracking index CTI 175 399 VIOTM 10000 V VIORM 890 V PSO 400 mW ISI 275 mA TSI 175 C Creepage distance standard DIP-4 7 mm Clearance distance standard DIP-4 7 mm Creepage distance 400 mil DIP-4 8 mm Clearance distance 400 mil DIP-4 8 mm Insulation thickness, reinforced rated per IEC 60950 2.10.5.1 0.4 mm Note As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS Tamb = 25 C, unless otherwise specified 1.5 50 I C - Collector Current (mA) - 55 C V F - Forward Voltage (V) 1.4 0 C 1.3 1.2 1.1 25 C 1.0 50 C 0.9 110 C 0.8 45 IF = 30 mA 40 35 30 IF = 20 mA 25 IF = 15 mA 20 I F = 10 mA 15 10 IF = 5 mA 5 0.7 0.10 0 1.00 10.00 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 100.00 18733 I F - Forward Current (mA) 17592 Fig. 2 - Forward Voltage vs. Forward Current IF IF = 1 mA VCE - Collector Emitter Voltage (V) Fig. 5 - Collector Current vs. Collector Emitter Voltage R L = 75 VCC = 5 V 10 000 IC 40 V ICE0 (nA) 1000 47 isfh610a_01 100 24 V 12 V 10 Fig. 3 - Linear Operation (without Saturation) IF 1. 0 k 1 VCC = 5 V 0.1 - 75 18734 - 25 25 75 125 Tamb - Ambient Temperature (C) Fig. 6 - Collector to Emitter Dark Current vs. Ambient Temperature 47 isfh610a_02 Fig. 4 - Linear Operation (with Saturation) www.vishay.com 648 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83740 Rev. 1.8, 10-Dec-08 SFH617A Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 C Rated IC (mA) 10 mA 10 5 mA 2 mA 0 0.0 18735 0.1 0.2 0.3 0.4 1 mA 0.5 0.6 VCE - Collector to Emitter Voltage (V) 17593 1.2 IF = 5 mA 1.0 10 mA 0.8 0.6 1 mA 0.4 0.2 Normalized to IF = 10 mA, Tamb = 25 C, VCE = 0.4 V, saturated 0.0 - 55 - 35 - 15 5 25 45 65 85 105 125 Tamb - Ambient Temperature (C) CTRNorm - Normalized Output Current Fig. 8 - Normalized Current Transfer Ratio vs. Ambient Temperature 10 mA 0.8 5 mA 0.6 1 mA Normalized to: Temp = 25 C at IF = 10 mA and VCE = 5V 0.0 - 55 - 35 - 15 18737 -3 0.6 -4 0.4 Normalized to I F = 10 mA, Tamb = 25 C, VCE = 5 V, non-saturated 0.2 0.0 0.10 1.00 10.00 100.00 IF - Forward Current (mA) 1.2 -1 1.0 -2 0.8 0.6 -3 0.4 -4 Normalized to IF = 10 mA, Tamb= 25 C, VCE = 0.4 V, saturated 0.2 0.0 0.10 17595 1.00 10.00 I F - Forward Current (mA) 100.00 Fig. 11 - Normalized CTR vs. Forward Current 1000 1.0 0.2 0.8 Fig. 10 - Normalized CTR vs. Forward Current 1.2 0.4 -2 -1 1.0 17594 Pulse width = 100 ms I F = 10 mA Duty cycle = 50 % 100 toff 10 ton 1 5 25 45 65 85 105 125 Tamb - Ambient Temperature (C) Fig. 9 - Normalized CTR vs. Temperature Document Number: 83740 Rev. 1.8, 10-Dec-08 Switching Time (s) CTR Norm - Normalized Output Current Fig. 7 - Normalized Current vs. Collector Emitter Saturation Voltage CTR Norm - Normalized Output Current 25 mA 20 1.2 CTR Norm - Normalized Output Current 30 Vishay Semiconductors 0.1 18340 1 10 100 R L - Load Resistance (k) Fig. 12 - Forward Resistance vs. Forward Current For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 649 SFH617A Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 C Rated Vishay Semiconductors Switching Time (ms) 1000 Pulse width = 100 ms I F = 10 mA Duty cycle = 50 % 100 trise 10 t fall 1 0.1 1 10 100 R L - Load Resistance (k) 18341 Fig. 13 - Forward Resistance vs. Forward Current PACKAGE DIMENSIONS in inches (millimeters) 2 1 Pin one ID 0.255 (6.48) 0.268 (6.81) ISO method A 3 4 0.179 (4.55) 0.190 (4.83) 0.300 (7.62) typ. 0.031 (0.79) typ. 0.030 (0.76) 0.045 (1.14) 0.050 (1.27) typ. 0.130 (3.30) 0.150 (3.81) 10 4 typ. 0.020 (0.508) 0.035 (0.89) 0.018 (0.46) i178027 0.230 (5.84) 0.250 (6.35) 0.110 (2.79) 0.130 (3.30) 3 to 9 0.008 (0.20) 0.012 (0.30) 0.050 (1.27) 0.022 (0.56) 0.100 (2.54) Option 6 Option 7 Option 9 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.300 (7.62) typ. 0.375 (9.53) 0.395 (10.03 ) 0.300 (7.62) ref. 0.028 (0.7) 0.180 (4.6) 0.160 (4.1) 0.315 (8.0) min. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) www.vishay.com 650 0.0040 (0.102) 0.0098 (0.249) 0.331 (8.4) min. 0.406 (10.3) max. For technical questions, contact: optocoupler.answers@vishay.com 0.012 (0.30 ) typ 0.020 (0.51 ) 0.040 (1.02 ) 15 max. 0.315 (8.00) min. 18450 Document Number: 83740 Rev. 1.8, 10-Dec-08 SFH617A Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS, 110 C Rated Vishay Semiconductors OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number: 83740 Rev. 1.8, 10-Dec-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 651 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1