FR1A - FR1M GLASS PASSIVATED FAST RECOVERY RECTIFIER Features * * * * * * * For Surface Mounted Applications High Temperature Metallurgically Bonded Contacts Capable of Meeting Environmental Standards of MIL-STD-19500 Plastic Material - UL Flammability Classification 94V-0 High Reliability Submersible Temperature of 265C for 10 Seconds in Solder Bath Glass Passivated Junction B SMB - DO-214AA A D Mechanical Data * * * * * C J Case: SMB, Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Approx. Weight: 0.093 grams Mounting Position: Any G E H Dim A Min Max 3.30 3.94 B 4.00 4.65 C 1.95 2.21 D 0.15 0.40 E 5.00 6.00 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Maximum Ratings and Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or inductive load. Unit FR1A FR1B FR1D FR1G FR1J FR1K FR1M Maximum Recurrent Peak Reverse Voltage Characteristic VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @ TA = 75C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0 A I(AV) 1.0 A IFSM 30 A VF 1.3 V 5.0 100 mA 50 mA Maximum DC Reverse Current at Rated @ TA = 25C DC Blocking Voltage @ TA = 125C Maximum Full Load Reverse Current Full Cycle Average @ TA = 75C IR Maximum Reverse Recovery Time (See Note 1) trr MaximumThermal Resistance (See Note 2) Unit 150 RQJL 250 500 500 ns 30 C/W Typical Junction Capacitance (See Note 3) CJ 15 pF Operating and Storage Temperature Rating TJ, TSTG -65 to +175 C Notes: 1. Reverse Recovery Test Conditions: I F = 0.5A, IR = 1A, IRR = 0.25A 2. Thermal Resistance from junction to lead with 6.0mm2 copper pads 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DS15003 Rev. C-3 1 of 2 FR1A-FR1M 6 4 2 Single Phase Half Wave 60Hz Resistive or Inductive Load 9.5mm Lead Lengths 0 20 40 60 80 100 120 140 160 180 TA, AMBIENT TEMPERATURE (C) Fig. 1, Forward Current Derating Curve CJ, JUNCTION CAPACITANCE (pF) TJ = 25C 10 1 10 100 VR, REVERSE VOLTAGE (VOLTS) Fig. 3, Forward Current Derating Curve DS15003 Rev. C-3 4.0 1.0 0.1 TJ = 25C PULSE WIDTH = 300mS 2% DUTY CYCLE 0.01 0.6 0.8 1.0 1.2 1.4 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Fig. 2, Typical Forward Characteristics 100 1 IF, INSTANTANEOUS FORWARD CURRENT (AMPERES) 8 IF, PEAK FORWARD SURGE CURRENT (AMPERES) I(AV), AVERAGE OUTPUT CURRENT (AMPERES) 10 30 25 20 15 10 8.3ms SINGLE HALF SINE-WAVE JEDEC METHOD 5 1 10 100 NUMBER OF CYCLES @ 60Hz Fig. 4, Max Non-Repetitive Peak Forward Surge Current 2 of 2 FR1A-FR1M