THRU RS401L/KBL005 RS407L/KBL10 Single Phase 4.0 AMPS. Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 4.0 Amperes KBL Features Ideal for printed circuit board Reliable low cost construction High surge current capability High temperature soldering guaranteed: 250C / 10 seconds / 0.375" ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Leads solderable per MIL-STD-202, Method 208 .265(6.73) .235(5.97) .77(19.558) .73(18.542) CHAM 156X450 .825(16.383) .605(15.367) .750MIN (19) .200 TYP. (5.08) .07(TYP) (1.778) .052(1.32) .048(1.22) .210(5.33) .190(4.83) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% RS RS Type Number 401L 402L KBL KBL 005 01 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @T A = 50C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load Maximum Instantaneous Forward Voltage@ 3.0A Peak Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Current at Rated DC Blocking Voltage and 150TA Operating Temperature Range TA NOTES: 1. Mounting conditions, 0.5" lead length maximum. 50 35 50 100 70 100 RS 403L KBL 02 RS 404L KBL 04 RS 405L KBL 06 RS 406L KBL 08 RS 407L KBL 10 Units 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V 4.0 A 200 A 1.0 V 10 uA 1.0 mA -55 to +150 C FIG.2-DERATING CURVE OUTPUT RECTIFIED CURRENT FIG.1-MAXIMUM FORWARD SUR GE CURRENT 6.0 100 75 50 25 0 0 10 100 NUMBER OF CYCLES AT 60Hz AVERAGE FORWARD OUTPUT CURRENT AMPERES PEAK FORWARD SURGE CURRENT AMPERES 125 4.0 2.0 0 0 50 150 100 AMBIENT TEMPERATURE, C FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT AMPERES 10 1.0 0.1 1.0 0.1 0.01 0.01 0 0.2 0.4 0.6 0.8 1.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS. 1.2 1.4 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 120 140 o