SCAS281Q - JANUARY 1993 - REVISED FEBRUARY 2004 D Operate From 1.65 V to 3.6 V D Specified From -40C to 85C, D Typical VOHV (Output VOH Undershoot) D -40C to 125C, and -55C to 125C D Inputs Accept Voltages to 5.5 V D Max tpd of 4.5 ns at 3.3 V D Typical VOLP (Output Ground Bounce) D <0.8 V at VCC = 3.3 V, TA = 25C 3 12 4 11 5 6 7 10 9 8 VCC 6A 6Y 5A 5Y 4A 4Y 1Y 2A 2Y 3A 3Y 14 1Y 1A NC VCC 6A 1 2 13 6A 3 12 6Y 4 11 5A 5 10 5Y 9 4A 6 7 8 SN54LVC04A . . . FK PACKAGE (TOP VIEW) 2A NC 2Y NC 3A 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 6Y NC 5A NC 5Y 3Y GND NC 4Y 4A 13 VCC 14 2 4Y 1 1A 1A 1Y 2A 2Y 3A 3Y GND SN74LVC04A . . . RGY PACKAGE (TOP VIEW) GND SN54LVC04A . . . J OR W PACKAGE SN74LVC04A . . . D, DB, DGV, NS, OR PW PACKAGE (TOP VIEW) >2 V at VCC = 3.3 V, TA = 25C Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) NC - No internal connection description/ordering information The SN54LVC04A hex inverter contains six independent inverters designed for 2.7-V to 3.6-V VCC operation, and the SN74LVC04A hex inverter contains six independent inverters designed for 1.65-V to 3.6-V VCC operation. The 'LVC04A devices perform the Boolean function Y = A. ORDERING INFORMATION PACKAGE TA -40C to 85C QFN - RGY SN74LVC04ARGYR Tube of 50 SN74LVC04AD Reel of 2500 SN74LVC04ADR Reel of 250 SN74LVC04ADT SOP - NS Reel of 2000 SN74LVC04ANSR LVC04A SSOP - DB Reel of 2000 SN74LVC04ADBR LC04A Tube of 90 SN74LVC04APW Reel of 2000 SN74LVC04APWR Reel of 250 SN74LVC04APWT TVSOP - DGV Reel of 2000 SN74LVC04ADGVR LC04A CDIP - J Tube of 25 SNJ54LVC04AJ SNJ54LVC04AJ CFP - W Tube of 150 SNJ54LVC04AW SNJ54LVC04AW LCCC - FK Tube of 55 SNJ54LVC04AFK SNJ54LVC04AFK TSSOP - PW -55C -55 C to 125 125C C TOP-SIDE MARKING Reel of 1000 SOIC - D -40C -40 C to 125 125C C ORDERABLE PART NUMBER LC04A LVC04A LC04A Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2004, Texas Instruments Incorporated !" #!$% &"' &! #" #" (" " ") !" && *+' &! #", &" ""%+ %!&" ", %% #""' #&! #% -./.010 %% #"" " ""& !%" ("*" "&' %% (" #&! #&! #", &" ""%+ %!&" ", %% #""' POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SCAS281Q - JANUARY 1993 - REVISED FEBRUARY 2004 description/ordering information (continued) Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment. FUNCTION TABLE (each inverter) INPUT A OUTPUT Y H L L H logic diagram, each inverter (positive logic) A Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 6.5 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 6.5 V Output voltage range, VO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -50 mA Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -50 mA Continuous output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA Package thermal impedance, JA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86C/W (see Note 3): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96C/W (see Note 3): DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127C/W (see Note 3): NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76C/W (see Note 3): PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113C/W (see Note 4): RGY package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Power dissipation, Ptot (TA = -40C to 125C) (see Notes 5 and 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mW Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The value of VCC is provided in the recommended operating conditions table. 3. The package thermal impedance is calculated in accordance with JESD 51-7. 4. The package thermal impedance is calculated in accordance with JESD 51-5. 5. For the D package: above 70C, the value of Ptot derates linearly with 8 mW/K. 6. For the DB, DGV, NS, and PW packages: above 60C, the value of Ptot derates linearly with 5.5 mW/K. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SCAS281Q - JANUARY 1993 - REVISED FEBRUARY 2004 recommended operating conditions (see Note 7) SN54LVC04A -55 TO 125C Operating VCC Supply voltage VIH VIL High-level input voltage VI VO Input voltage Output voltage IOH High-level output current IOL Low-level output current Data retention only MAX 2 3.6 2 VCC = 2.7 V VCC = 3 V VCC = 2.7 V UNIT V 1.5 VCC = 2.7 V to 3.6 V VCC = 2.7 V to 3.6 V Low-level input voltage MIN V 0.8 V 0 5.5 V 0 VCC -12 V -24 mA 12 VCC = 3 V 24 mA NOTE 7: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. recommended operating conditions (see Note 7) SN74LVC04A Operating VCC Supply voltage VIH High-level input voltage VIL VI VO IOH IOL Low-level input voltage Data retention only VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V VCC = 1.65 V to 1.95 V TA = 25C MIN MAX MIN MAX MIN MAX 1.65 1.65 3.6 1.65 3.6 3.6 -40 TO 85C -40 TO 125C 1.5 1.5 1.5 0.65xVCC 1.7 0.65xVCC 1.7 0.65xVCC 1.7 2 2 0.35xVCC 0.7 VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V V V 2 0.35xVCC 0.7 0.8 UNIT 0.35xVCC 0.7 0.8 V 0.8 Input voltage 0 5.5 0 5.5 0 5.5 V Output voltage 0 VCC -4 0 VCC -4 0 VCC -4 V High-level output current Low-level output current VCC = 1.65 V VCC = 2.3 V VCC = 2.7 V VCC = 3 V -8 -8 -8 -12 -12 -12 -24 -24 -24 VCC = 1.65 V VCC = 2.3 V 4 4 4 8 8 8 VCC = 2.7 V VCC = 3 V 12 12 12 24 24 24 mA mA NOTE 7: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SCAS281Q - JANUARY 1993 - REVISED FEBRUARY 2004 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) SN54LVC04A PARAMETER TEST CONDITIONS -55 TO 125C VCC MIN IOH = -100 A 2.7 V to 3.6 V 2.7 V VOH IOH = -12 mA IOH = -24 mA IOL = 100 A UNIT MAX VCC-0.2 2.2 3V 2.4 3V 2.2 2.7 V to 3.6 V V 0.2 IOL = 12 mA IOL = 24 mA 2.7 V 0.4 3V 0.55 II ICC VI = 5.5 V or GND VI = VCC or GND, IO = 0 3.6 V 5 A 3.6 V 10 A ICC One input at VCC - 0.6 V, Other inputs at VCC or GND 500 A VOL 2.7 V to 3.6 V V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) SN74LVC04A PARAMETER TEST CONDITIONS VCC MIN IOH = -100 A IOH = -4 mA VOH 1.65 V to 3.6 V IOH = -8 mA IOH = -12 mA IOH = -24 mA IOL = 100 A VOL II ICC TA = 25C TYP -40 TO 85C MAX MIN -40 TO 125C MAX MIN 1.65 V VCC-0.2 1.29 VCC-0.2 1.2 VCC-0.3 1.05 2.3 V 1.9 1.7 1.55 2.7 V 2.2 2.2 2.05 3V 2.4 2.4 2.25 3V 2.3 2.2 UNIT MAX V 2 1.65 V to 3.6 V 0.1 0.2 IOL = 4 mA IOL = 8 mA 1.65 V 0.24 0.45 0.6 2.3 V 0.3 0.7 0.85 IOL = 12 mA IOL = 24 mA 2.7 V 0.4 0.4 0.6 3V 0.55 0.55 0.8 VI = 5.5 V or GND VI = VCC or GND, IO = 0 3.6 V 1 5 20 A 3.6 V 1 10 40 A 500 500 5000 A ICC One input at VCC - 0.6 V, Other inputs at VCC or GND Ci VI = VCC or GND 2.7 V to 3.6 V 3.3 V 0.3 5 V pF switching characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) SN54LVC04A PARAMETER FROM (INPUT) TO (OUTPUT) VCC -55 TO 125C MIN 5.5 2.7 V tpd 4 Y A POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3.3 V 0.3 V UNIT MAX 0.5 4.5 ns SCAS281Q - JANUARY 1993 - REVISED FEBRUARY 2004 switching characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) SN74LVC04A PARAMETER tpd FROM (INPUT) A TO (OUTPUT) Y VCC TA = 25C MIN TYP MAX -40 TO 85C MIN MAX MIN MAX 7.5 1 8 1 9.5 1.8 V 0.15 V 1 4.1 2.5 V 0.2 V 1 3.6 7 1 7.5 1 9 2.7 V 1 3 5.3 1 5.5 1 7 3.3 V 0.3 V 1 2.5 4.3 1 4.5 1 6 3.3 V 0.3 V tsk(o) -40 TO 125C 1 UNIT ns 1.5 ns VCC TYP UNIT 1.8 V 6 2.5 V 7 3.3 V 8 operating characteristics, TA = 25C TEST CONDITIONS PARAMETER Cpd Power dissipation capacitance per gate POST OFFICE BOX 655303 f = 10 MHz * DALLAS, TEXAS 75265 pF 5 SCAS281Q - JANUARY 1993 - REVISED FEBRUARY 2004 PARAMETER MEASUREMENT INFORMATION RL From Output Under Test CL (see Note A) VLOAD Open S1 GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V 0.15 V 2.5 V 0.2 V 2.7 V 3.3 V 0.3 V VI tr/tf VCC VCC 2.7 V 2.7 V 2 ns 2 ns 2.5 ns 2.5 ns VM VLOAD CL RL V VCC/2 VCC/2 1.5 V 1.5 V 2 x VCC 2 x VCC 6V 6V 30 pF 30 pF 50 pF 50 pF 1 k 500 500 500 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tw tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPLH tPHL VOH VM Output VM VOL tPHL Output Waveform 1 S1 at VLOAD (see Note B) tPLH VM VM VM 0V tPZL tPLZ VLOAD/2 VM tPZH VOH Output VI Output Control VM VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS Output Waveform 2 S1 at GND (see Note B) VOL + V VOL tPHZ VM VOH - V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 . D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 8-Mar-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) 5962-9760501Q2A ACTIVE LCCC FK 20 1 None Call TI Level-NC-NC-NC 5962-9760501QCA ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC 5962-9760501QDA ACTIVE CFP W 14 1 None Call TI Level-NC-NC-NC SN74LVC04AD ACTIVE SOIC D 14 50 Pb-Free (RoHS) CU NIPDAU SN74LVC04ADBLE OBSOLETE SSOP DB 14 None Call TI SN74LVC04ADBR ACTIVE SSOP DB 14 2000 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM SN74LVC04ADGVR ACTIVE TVSOP DGV 14 2000 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM SN74LVC04ADR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM SN74LVC04ADT ACTIVE SOIC D 14 250 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM SN74LVC04ANSR ACTIVE SO NS 14 2000 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM SN74LVC04APW ACTIVE TSSOP PW 14 90 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM SN74LVC04APWLE OBSOLETE TSSOP PW 14 None Call TI SN74LVC04APWR ACTIVE TSSOP PW 14 2000 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM SN74LVC04APWT ACTIVE TSSOP PW 14 250 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM SN74LVC04ARGYR ACTIVE QFN RGY 14 1000 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR SNJ54LVC04AFK ACTIVE LCCC FK 20 1 None Call TI Level-NC-NC-NC SNJ54LVC04AJ ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC SNJ54LVC04AW ACTIVE CFP W 14 1 None Call TI Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight. (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 8-Mar-2005 accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA MLCC006B - OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MPDS006C - FEBRUARY 1996 - REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0-8 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. Falls within JEDEC: 24/48 Pins - MO-153 14/16/20/56 Pins - MO-194 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MTSS001C - JANUARY 1995 - REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated