MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT SWITCHMODE] Power Rectifiers These state-of-the-art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. Features * * * * * * * * * Ultrafast 35 and 60 Nanosecond Recovery Times 175C Operating Junction Temperature Popular TO-220 Package Epoxy Meets UL 94 V-0 @ 0.125 in High Temperature Glass Passivated Junction High Voltage Capability to 600 V Low Leakage Specified @ 150C Case Temperature Current Derating @ Both Case and Ambient Temperatures Pb-Free Packages are Available* http://onsemi.com ULTRAFAST RECTIFIERS 16 AMPERES, 100-600 VOLTS 1 2, 4 3 4 Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 1.9 Grams (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds TO-220AB CASE 221A PLASTIC 1 2 3 MARKING DIAGRAM AY WW U16xxG AKA A Y WW U16xx *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. G KA = = = = Assembly Location Year Work Week Device Code xx = 10, 15, 20, 40 or 60 = Pb-Free Package = Diode Polarity ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. (c) Semiconductor Components Industries, LLC, 2008 September, 2008 - Rev. 7 1 Publication Order Number: MUR1620CT/D MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MAXIMUM RATINGS MUR16 Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Total Device, (Rated VR), TC = 150C Peak Rectified Forward Current (Rated VR, Square Wave, 20 kHz), TC = 150C Per Leg Total Device Per Diode Leg Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Symbol 10CT 15CT 20CT 40CT 60CT Unit VRRM VRWM VR 100 150 200 400 600 V IF(AV) 8.0 16 A IFM 16 A IFSM 100 A TJ, Tstg *65 to +175 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS (Per Diode Leg) Parameter Symbol Maximum Thermal Resistance, Junction-to-Case Value Unit RqJC 3.0 2.0 Symbol 1620 1640 1660 0.895 0.975 1.00 1.30 1.20 1.50 C/W ELECTRICAL CHARACTERISTICS (Per Diode Leg) Characteristic Maximum Instantaneous Forward Voltage (Note 1) (iF = 8.0 A, TC = 150C) (iF = 8.0 A, TC = 25C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 150C) (Rated DC Voltage, TC = 25C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A) trr 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0% http://onsemi.com 2 250 5.0 500 10 35 25 60 50 Unit V mA ns MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MUR1610CT, MUR1615CT, MUR1620CT 100 IR, REVERSE CURRENT ( mA) 70 50 30 TJ = 175C 100C 10 TJ = 175C 100C 0.8 0.4 0.2 0.08 0.04 0.02 25C 7.0 20 0 25C 40 60 5.0 80 100 140 120 180 200 160 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 800 400 200 80 40 20 8.0 4.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 SQUARE WAVE 1.0 0 140 vF, INSTANTANEOUS VOLTAGE (VOLTS) 145 150 Figure 1. Typical Forward Voltage, Per Leg 155 160 165 170 175 180 TC, CASE TEMPERATURE (C) 14 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Current Derating, Case, Per Leg RqJA = 16C/W RqJA = 60C/W (NO HEATSINK) 12 dc 10 8.0 SQUARE WAVE 6.0 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 160 180 200 10 TJ = 175C 9.0 8.0 SQUARE WAVE 7.0 dc 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient, Per Leg Figure 5. Power Dissipation, Per Leg http://onsemi.com 3 10 MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MUR1640CT 70 50 100C TJ = 175C 20 25C 10 800 400 200 TJ = 175C 80 40 20 8.0 4.0 2.0 150C 100C 0.8 0.4 0.2 0.08 0.04 0.02 25C 7.0 50 0 100 5.0 150 200 250 350 300 400 450 500 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 IR, REVERSE CURRENT ( mA) 100 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.8 0.6 1.2 1.0 1.4 1.6 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 SQUARE WAVE 1.0 0 140 vF, INSTANTANEOUS VOLTAGE (VOLTS) 145 150 Figure 6. Typical Forward Voltage, Per Leg 155 160 165 170 175 180 TC, CASE TEMPERATURE (C) 14 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 8. Current Derating, Case, Per Leg RqJA = 16C/W RqJA = 60C/W (NO HEATSINK) 12 10 dc 8.0 6.0 SQUARE WAVE 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 160 180 200 10 TJ = 175C 9.0 SQUARE WAVE dc 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient, Per Leg Figure 10. Power Dissipation, Per Leg http://onsemi.com 4 10 MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MUR1660CT 100 IR, REVERSE CURRENT ( mA) 70 50 30 100C 10 25C TJ = 150C 100C 25C 7.0 100 300 200 5.0 400 600 500 VR, REVERSE VOLTAGE (VOLTS) Figure 12. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) TJ = 150C 20 800 400 200 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 1.0 0.7 0.5 0.3 0.2 0.1 0.6 0.4 0.8 1.0 1.2 1.4 1.6 1.8 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 SQUARE WAVE 1.0 0 140 vF, INSTANTANEOUS VOLTAGE (VOLTS) 145 150 Figure 11. Typical Forward Voltage, Per Leg 155 160 165 170 175 180 TC, CASE TEMPERATURE (C) 10 RqJA = 16C/W RqJA = 60C/W (NO HEATSINK) 9.0 dc 8.0 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 13. Current Derating, Case, Per Leg 7.0 6.0 SQUARE WAVE 5.0 4.0 dc 3.0 2.0 SQUARE WAVE 1.0 0 0 20 40 60 80 100 120 140 160 180 200 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 SQUARE WAVE TJ = 175C dc 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 14. Current Derating, Ambient, Per Leg Figure 15. Power Dissipation, Per Leg http://onsemi.com 5 10 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 ZqJC(t) = r(t) RqJC P(pk) 0.05 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 t1 0.01 t2 0.02 TJ(pk) - TC = P(pk) ZqJC(t) DUTY CYCLE, D = t1/t2 SINGLE PULSE 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, TIME (ms) Figure 16. Thermal Response 1000 C, CAPACITANCE (pF) MUR1620CT THRU 1660CT MUR1605CT THRU 1615CT 300 TJ = 25C 100 30 10 1.0 10 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 17. Typical Capacitance, Per Leg ORDERING INFORMATION Device MUR1610CT MUR1610CTG MUR1615CT MUR1615CTG MUR1620CT MUR1620CTG MUR1640CT MUR1640CTG MUR1660CT MUR1660CTG Package Shipping TO-220 TO-220 (Pb-Free) TO-220 TO-220 (Pb-Free) TO-220 TO-220 (Pb-Free) 50 Units / Rail TO-220 TO-220 (Pb-Free) TO-220 TO-220 (Pb-Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 6 MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AF -T- B F SEATING PLANE C T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.161 0.095 0.105 0.110 0.155 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 4.09 2.42 2.66 2.80 3.93 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MUR1620CT/D