MBR4045WT-D - ON Semiconductor

 Semiconductor Components Industries, LLC, 2000

October, 2000 – Rev. 4 1Publication Order Number:

MBR4045WT/D

MBR4045WT

SWITCHMODE

Power Rectifier

The SWITCHMODE power rectifier employs the use of the

Schottky Barrier principle with a Platinum barrier metal. This

state-of-the-art device has the following features:

•Dual Diode Construction — Terminals 1 and 3 May Be Connected

for Parallel Operation at Full Rating

•45 Volt Blocking Voltage

•Low Forward Voltage Drop

•Guardring for Stress Protection and High dv/dt Capability

(> 10 V/ns)

•150°C Operating Junction Temperature

Mechanical Characteristics

•Case: Epoxy, Molded

•Weight: 4.3 grams (approximately)

•Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

•Lead Temperature for Soldering Purposes:

260°C Max. for 10 Seconds

•Shipped 30 Units Per Plastic Tube

•Marking: B4045

MAXIMUM RATINGS

Rating Symbol Max Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

VRRM

VRWM

45 V

Average Rectified Forward Current

(Rated VR, TC = 125°C) Per Diode

Per Device

IF(AV) 20

Peak Repetitive Forward Current,

(Rated VR, Square W ave,

20 kHz, TC = 90°C) Per Diode

IFRM 40 A

Non–Repetitive Peak Surge Current

(Surge Applied at Rated Load

Conditions Halfwave, Single

Phase, 60 Hz)

IFSM 400 A

Peak Repetitive Reverse Current

(2.0 s, 1.0 kHz) IRRM 2.0 A

Storage Temperature Range Tstg –65 to +175 °C

Operating Junction Temperature TJ–65 to +150 °C

Peak Surge Junction Temperature

(Forward Current Applied) TJ(pk) 175 °C

Voltage Rate of Change dv/dt 10,000 V/sDevice Package Shipping

ORDERING INFORMATION

MBR4045WT TO–247

http://onsemi.com

TO–247AC

CASE 340L

STYLE 2

30 Units/Rail

SCHOTTKY BARRIER

RECTIFIER

40 AMPERES

45 VOLTS

2, 4

MARKING DIAGRAM

B4045

B4045 = Device Code

MBR4045WT

http://onsemi.com

THERMAL CHARACTERISTICS (Per Diode)

Rating Symbol Max Unit

Thermal Resistance — Junction to Case RθJC 1.4 °C/W

ELECTRICAL CHARACTERISTICS (Per Diode)

Instantaneous Forward Voltage (Note 1.)

@ IF = 20 Amps, TC = 25°C

@ IF = 20 Amps, TC = 125°C

@ IF = 40 Amps, TC = 25°C

@ IF = 40 Amps, TC = 125°C

VF0.70

0.60

0.80

0.75

Volts

Instantaneous Reverse Current (Note 1.)

@ Rated DC Voltage, TC = 25°C

@ Rated DC Voltage, TC = 100°C

IR1.0

1. Pulse Test: Pulse Width = 300 µs, Duty Cycle < 2.0%

TYPICAL ELECTRICAL CHARACTERISTICS

Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current

Figure 3. Typical Capacitance Per Leg Figure 4. Current Derating Per Leg

VR, REVERSE VOLTAGE (VOLTS)

IR, REVERSE CURRENT (mA)

vF, INSTANTANEOUS FORWARD VOLTAGE (mV)

iF, INSTANTANEOUS FORWARD CURRENT (AMPS)

VR, REVERSE VOLTAGE (VOLTS)

C, CAPACITANCE (pF)

TC, CASE TEMPERATURE (°C)

IF(AV), AVERAGE FORWARD CURRENT (AMPS)

100

1800700600500400300200100

TC = 150°C

TC = 100°CTC = 25°C

TC = 150°C

TC = 100°C

TC = 25°C

100

01020304050

0.1

0.01

10000

1000

100 10 100

100

0110 120 130 140 150 160

SQUARE WAVE

(VR = 45 V)

MBR4045WT

http://onsemi.com

PACKAGE DIMENSIONS

TO–247 PSI

PLASTIC

CASE 340L–02

ISSUE D

0.25 (0.010) MYQS

123

–T–

–B–

–Y–

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETER.

2 PL

3 PL

0.63 (0.025) MTBM

–Q–

LDIM MIN MAX MIN MAX

INCHESMILLIMETERS

A20.32 21.08 0.800 8.30

B15.75 16.26 0.620 0.640

C4.70 5.30 0.185 0.209

D1.00 1.40 0.040 0.055

E2.20 2.60 0.087 0.102

F1.65 2.13 0.065 0.084

G5.45 BSC 0.215 BSC

H1.50 2.49 0.059 0.098

J0.40 0.80 0.016 0.031

K20.06 20.83 0.790 0.820

L5.40 6.20 0.212 0.244

N4.32 5.49 0.170 0.216

P--- 4.50 --- 0.177

Q3.55 3.65 0.140 0.144

U6.15 BSC 0.242 BSC

W2.87 3.12 0.113 0.123

STYLE 2:

PIN 1. ANODE

2. CATHODE (S)

3. ANODE 2

4. CATHODES (S)

MBR4045WT

http://onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes

without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular

purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,

including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be

validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.

SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or

death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold

SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable

attorney fees arising out of, directly or indirectly , any claim of personal injury or death associated with such unintended or unauthori zed use, even if such claim

alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

PUBLICATION ORDERING INFORMATION

CENTRAL/SOUTH AMERICA:

Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)

Email: ONlit–spanish@hibbertco.com

Toll–Free from Mexico: Dial 01–800–288–2872 for Access –

then Dial 866–297–9322

ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support

Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)

Toll Free from Hong Kong & Singapore:

001–800–4422–3781

Email: ONlit–asia@hibbertco.com

JAPAN: ON Semiconductor, Japan Customer Focus Center

4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031

Phone: 81–3–5740–2700

Email: r14525@onsemi.com

ON Semiconductor Website: http://onsemi.com

For additional information, please contact your local

Sales Representative.

MBR4045WT/D

SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.

NORTH AMERICA Literature Fulfillment:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada

Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada

Email: ONlit@hibbertco.com

Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada

N. American Technical Support: 800–282–9855 Toll Free USA/Canada

EUROPE: LDC for ON Semiconductor – European Support

German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)

Email: ONlit–german@hibbertco.com

French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)

Email: ONlit–french@hibbertco.com

English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)

Email: ONlit@hibbertco.com

EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781

*Available from Germany, France, Italy, UK, Ireland