Part Number: MMBZ5221BW thru MMBZ5259BW PAGE 2
rebmuNtraP egatloVreneZlanimoN ecnadepmIreneZ.xaM esreveRxaM tnerruCegakaeL egakcaP
VZ@IZT ZZT @IZT ZZK @IZK IR@VR
V.moN V.niM V.xaM ΩΩ
Ω
ΩΩ Am ΩΩ
Ω
ΩΩ Am µAV
sedoiDreneZsttaWm002
WB1225ZBMM4.282.225.20302002152.00011 323-TOS
WB2225ZBMM 5.2 83.2 36.2 03 02 0521 52.0 001 1 323-TOS
WB3225ZBMM7.275.248.20302003152.0571 323-TOS
WB5225ZBMM 3 58.2 51.3 03 02 0061 52.0 05 1 323-TOS
WB6225ZBMM3.341.374.38202006152.0521 323-TOS
WB7225ZBMM 6.3 24.3 87.3 42 02 0071 52.0 51 1 323-TOS
WB8225ZBMM9.317.31.43202009152.0011 323-TOS
WB9225ZBMM 3.4 90.4 25.4 22 02 0002 52.0 5 1 323-TOS
WB0325ZBMM7.474.449.49102009152.052 323-TOS
WB1325ZBMM 1.5 58.4 63.5 71 02 0061 52.0 5 2 323-TOS
WB2325ZBMM6.523.588.51102006152.053 323-TOS
WB4325ZBMM 2.6 98.5 15.6 7 02 0001 52.0 5 4 323-TOS
WB5325ZBMM8.664.641.750205752.035 323-TOS
WB6325ZBMM 5.7 31.7 88.7 6 02 005 52.0 3 6 323-TOS
WB7325ZBMM2.897.716.880200552.036 323-TOS
WB9325ZBMM 1.9 56.8 65.9 01 02 006 52.0 3 5.6 323-TOS
WB0425ZBMM015.95.01710200652.038 323-TOS
WB1425ZBMM 11 54.01 55.11 22 02 006 52.0 3 4.8 323-TOS
WB2425ZBMM214.116.21030200652.021.9323-TOS
WB3425ZBMM 31 53.21 56.31 31 5.9 006 52.0 1 9.9 323-TOS
WB5425ZBMM5152.4157.51615.800652.05.011323-TOS
WB6425ZBMM 61 2.51 8.61 71 8.7 006 52.0 1.0 21 323-TOS
WB8425ZBMM811.719.81127 00652.01.041323-TOS
WB0525ZBMM 02 91 12 52 2.6 006 52.0 1.0 51 323-TOS
WB1525ZBMM229.021.32926.500652.01.071323-TOS
WB2525ZBMM 42 8.22 2.52 33 2.5 006 52.0 1.0 81 323-TOS
WB4525ZBMM7256.5253.82145 00652.01.012323-TOS
WB5525ZBMM 82 6.62 4.92 44 5.4 006 52.0 1.0 12 323-TOS
WB6525ZBMM035.825.13942.400652.01.032323-TOS
WB7525ZBMM 33 53.13 56.43 85 8.3 007 52.0 1.0 52 323-TOS
WB8525ZBMM632.438.73074.300752.01.072323-TOS
WB9525ZBMM 93 50.73 59.04 08 2.3 008 52.0 1.0 03 323-TOS
MMBZ5221BW thru MMBZ5259BW
ELECTRICAL CHARACTERISTICS (TA=25OC unless otherwise noted) VF=1.2V max, IF=100mA for all types.
NOTE:
1.Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%.
2.Speci als Available Include:
A. Nominal zener voltages between the voltages shown and tighter voltage tolerances.
B. Matched sets.
3.Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body.
4.Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener
current (IZT or IZK) is superimposed on IZT or IZK.
5.Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine
wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5.