ADM00276 - MICROCHIP TECHNOLOGY

 2015 Microchip Technology Inc. DS50002352A

MCP2200

USB to UART with Isolation

Demo Board

User’s Guide

DS50002352A-page 2  2015 Microchip Technology Inc.

Information contained in this publication regarding device

applications and the like is provided only for your convenience

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR

IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION,

INCLUDING BUT NOT LIMITED TO ITS CONDITION,

QUALITY, PERFORMANCE, MERCHANTABILITY OR

FITNESS FOR PURPOSE. Microchip disclaims all liability

arising from this information and its use. Use of Microchip

devices in life support and/or safety applications is entirely at

the buyer’s risk, and the buyer agrees to defend, indemnify and

hold harmless Microchip from any and all damages, claims,

suits, or expenses resulting from such use. No licenses are

conveyed, implicitly or otherwise, under any Microchip

intellectual property rights.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2009 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

Tempe, Arizona; Gresham, Oregon and design centers in California

and India. The Company’s quality system processes and procedures

are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping

devices, Serial EEPROMs, microperipherals, nonvolatile memory and

analog products. In addition, Microchip’s quality system for the design

and manufacture of development systems is ISO 9001:2000 certified.

QUALITY MANAGEMENT S

YSTEM

CERTIFIED BY DNV

== ISO/TS 16949 ==

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC,

FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer,

LANCheck, MediaLB, MOST, MOST logo, MPLAB,

OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC,

SST, SST Logo, SuperFlash and UNI/O are registered

trademarks of Microchip Technology Incorporated in the

U.S.A. and other countries.

The Embedded Control Solutions Company and mTouch are

registered trademarks of Microchip Technology Incorporated

in the U.S.A.

Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo,

CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit

Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet,

KleerNet logo, MiWi, MPASM, MPF, MPLAB Certified logo,

MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code

Generation, PICDEM, PICDEM.net, PICkit, PICtail,

RightTouch logo, REAL ICE, SQI, Serial Quad I/O, Total

Endurance, TSHARC, USBCheck, VariSense, ViewSpan,

WiperLock, Wireless DNA, and ZENA are trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

SQTP is a service mark of Microchip Technology Incorporated

in the U.S.A.

Silicon Storage Technology is a registered trademark of

Microchip Technology Inc. in other countries.

GestIC is a registered trademarks of Microchip Technology

Germany II GmbH & Co. KG, a subsidiary of Microchip

Technology Inc., in other countries.

All other trademarks mentioned herein are property of their

respective companies.

ISBN: 978-1-63277-264-0

 2015 Microchip Technology Inc. DS50002352A-page 3

Object of Declaration: MCP2200 USB to UART with Isolation Demo Board

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 4  2015 Microchip Technology Inc.

NOTES:

MCP2200 USB TO UART

WITH ISOLATION DEMO BOARD

USER’S GUIDE

 2015 Microchip Technology Inc. DS50002352A-page 5

Table of Contents

Preface ........................................................................................................................... 7

Introduction............................................................................................................ 7

Document Layout .................................................................................................. 7

Conventions Used in this Guide ............................................................................ 8

Recommended Reading........................................................................................ 9

The Microchip Web Site ........................................................................................ 9

Customer Support ................................................................................................. 9

Revision History .................................................................................................... 9

Chapter 1. Product Overview

1.1 Introduction ................................................................................................... 11

1.2 What is the MCP2200 USB to UART with Isolation

Demo Board? ......................................................................................... 11

1.3 What the MCP2200 USB to UART with Isolation

Demo Board Kit Contains ....................................................................... 11

Chapter 2. Installation and Operation

2.1 Introduction ................................................................................................... 13

2.2 Software Setup ............................................................................................. 13

2.3 Software Operation ...................................................................................... 14

Appendix A. Schematics and Layouts

A.1 Introduction .................................................................................................. 17

A.2 Board – Schematic ....................................................................................... 18

A.3 Board – Top Copper and Silk ...................................................................... 19

A.4 Board – Top Copper ................................................................................... 19

A.5 Board – Bottom Copper .............................................................................. 19

Appendix B. Bill of Materials (BOM)

Worldwide Sales and Service .................................................................................... 22

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 6  2015 Microchip Technology Inc.

NOTES:

MCP2200 USB TO UART

WITH ISOLATION DEMO BOARD

USER’S GUIDE

 2015 Microchip Technology Inc. DS50002352A-page 7

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using

the MCP2200 USB to UART with Isolation Demo Board. Items discussed in this

chapter include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Revision History

DOCUMENT LAYOUT

This document describes how to use the MCP2200 USB to UART with Isolation Demo

Board as a development tool to emulate and debug firmware on a target board. The

document is organized as follows:

•Chapter 1. “Product Overview”– Important information about the MCP2200

USB to UART with Isolation Demo Board.

•Chapter 2. “Installation and Operation” – This chapter includes a detailed

description of each function of the demo board and instructions for how to begin

using the board.

•Appendix A. “Schematics and Layouts” – Shows the schematic and layout

diagrams for the MCP2200 USB to UART with Isolation Demo Board.

•Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the

MCP2200 USB to UART with Isolation Demo Board.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level

of the document.

For the most up-to-date information on development tools, see the MPLAB® IDE online help.

Select the Help menu, and then Topics to open a list of available online help files.

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 8  2015 Microchip Technology Inc.

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Arial font:

Italic characters Referenced books MPLAB® IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or

dialog

“Save project before build”

Underlined, Italic text with

right angle bracket

A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

N‘Rnnnn A number in verilog format,

where N is the total number of

digits, R is the radix and n is a

digit.

4‘b0010, 2‘hF1

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Courier New font:

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be

any valid filename

Square brackets [ ] Optional arguments mcc18 [options] file

[options]

Curly brackets and pipe

character: { | }

Choice of mutually exclusive

arguments; an OR selection

errorlevel {0|1}

Ellipses... Replaces repeated text var_name [,

var_name...]

Represents code supplied by

user

void main (void)

{ ...

}

Preface

 2015 Microchip Technology Inc. DS50002352A-page 9

RECOMMENDED READING

This user's guide describes how to use MCP2200 USB to UART with Isolation Demo

Board. Another useful document is listed below. The following Microchip document is

available and recommended as a supplemental reference resource:

• MCP2200 Data Sheet - “USB 2.0 to UART Protocol Converter with GPIO”

(DS22228)

This data sheet provides detailed information regarding the MCP2200 product.

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web

site is used as a means to make files and information easily available to customers.

Accessible by using your favorite Internet browser, the web site contains the following

information:

•Product Support – Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,

latest software releases and archived software

•General Technical Support – Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program

member listing

•Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,

distributors and factory representatives

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor, representative or field application engineer

(FAE) for support. Local sales offices are also available to help customers. A listing of

sales offices and locations is included in the back of this document.

Technical support is available through the web site at:

http://www.microchip.com/support.

REVISION HISTORY

Revision A (May 2015)

Original release of this document.

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 10  2015 Microchip Technology Inc.

NOTES:

MCP2200 USB TO UART

WITH ISOLATION DEMO BOARD

USER’S GUIDE

 2015 Microchip Technology Inc. DS50002352A-page 11

Chapter 1. Product Overview

1.1 INTRODUCTION

This chapter provides an overview of the MCP2200 USB to UART with Isolation Demo

Board and covers the following topics:

• What is the MCP2200 USB to UART with Isolation Demo Board?

• What the MCP2200 USB to UART with Isolation Demo Board kit contains

1.2 WHAT IS THE MCP2200 USB TO UART WITH ISOLATION DEMO BOARD?

The MCP2200 USB to UART with Isolation Demo Board is a USB to UART

development and evaluation board for the MCP2200 device. This board is powered

from the host’s USB port. Two of the MCP2200 GPIO pins (GP6 and GP7) are

connected to LEDs used to indicate the USB to UART traffic when the associated pins

are configured as TxLED and RxLED pins, respectively. The isolated side is powered

externally with 3V to 5.5V. The board offers 3.75 kV AC of electrical isolation for power

and UART signals.

Microchip Technology Inc. provides a software package to be used with this board that

can be downloaded from Microchip’s web site. This PC software is used to

evaluate/demonstrate the MCP2200 as a Virtual Com Port (VCP) device. This software

also allows custom device configurations.

A DLL is included to allow the development of the custom configurations and software

applications to control the GPIOs, that can be downloaded from the product/board

web page.

1.3 WHAT THE MCP2200 USB TO UART WITH ISOLATION DEMO BOARD KIT

CONTAINS

The MCP2200 USB to UART with Isolation Demo Board kit includes:

• MCP2200 USB to UART with Isolation Demo Board (ADM00276)

• Mini USB Cable

• ABS Protective Case

• Important Information Sheet

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 12  2015 Microchip Technology Inc.

NOTES:

MCP2200 USB TO UART

WITH ISOLATION DEMO BOARD

USER’S GUIDE

 2015 Microchip Technology Inc. DS50002352A-page 13

Chapter 2. Installation and Operation

2.1 INTRODUCTION

The MCP2200 USB to UART with Isolation Demo Board is designed to demonstrate the

device in a VCP environment, where an electrical isolation is needed between the USB host

and the targeted UART system.

The MCP2200 USB to UART with Isolation Demo Board has the following features:

• Dedicated Tx LED (green) and Rx LED (red) to indicate the USB to UART traffic

• Isolated power LED (green) that indicates the presence of power on the isolated side

• Mini USB connector

• 6-pin PICkit™ Serial header with the UART (Tx and Rx) signals and power signals

and GND)

• Isolated transceiver powered externally from the isolated side with 3V to 5.5V that can

be used as a voltage level translator

2.2 SOFTWARE SETUP

To set up the board software, first download the support material (software and drivers) from

the board’s page on the Microchip web site.

1. Connect the board to a USB port on a Windows or Linux system. Wait for the

operating system to detect and install the device.

2. For Linux machines, the driver installation is not required unless the support for USB

CDC ACM class is not present. Please read the

Linux Driver Readme

file on the

board’s web page for more details.

3. For MAC OS read the MCP2200/MCP2221 Mac Driver Information from the product

web page.

4. If required, the MCP2200 Configuration Utility software can be installed.

FIGURE 2-1: MCP2200 USB to UART with Isolation Demo Board

Note 1:

If the software fails to start and the message box indicates a “Code 10 error”

message, a Microsoft update may be required. The update (KB943198) can

be downloaded from http://support.microsoft.com/kb/943198.

The default VID is 0x04D8, licensed to Microchip. The default PID for the

MCP2200 is 0x00DF. Changing the VID assumes you own a license from the

USB consortium, while changing the PID assumes you have licensed one

from Microchip.

Please consult the

MCP2200 Windows Driver Readme

document on the

MCP2200 webpage for a complete list of known windows installation issues.

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 14  2015 Microchip Technology Inc.

2.3 SOFTWARE OPERATION

The board operates as a USB to UART converter. In addition, the software can be used

to control the I/O lines and set custom configurations.

2.3.1 USB to UART Operation

The board can be connected to a USB host and to a UART signal (or signals) of the

targeted system. If the host application sends a “Set Line Coding” command (sets the

UART baud rate), the MCP2200 will automatically switch to the correct baud rate.

MCP2200 supports the following UART data format: eight data bits, one stop bit,

no parity. Setting other parameters than the supported ones will not return an error, but

the board will still operate using eight data bits, one stop bit and no parity. The “no error

return” behavior was chosen in order to prevent crashes from certain terminal software

that cannot handle properly the rejection of the selected parameters.

2.3.2 Configuration Software

The PC software allows the user to evaluate functionality and set custom

configurations. Figure 2-2 shows the main screen.

FIGURE 2-2: Main Software Screen

 2015 Microchip Technology Inc. DS50002352A-page 15

The software is designed to help in the development of custom configurations. The

following functionalities can be modified to meet the custom/user’s requirements:

•Vendor ID (VID) and Product ID (PID): The default VID is 0x04D8, which is

assigned to Microchip by the USB IF. The VID can be changed to another VID if

authorized by the owner of the assignment. Contact the USB IF for more information.

The default PID for the MCP2200 device is 0x00DF and can be used “as-is”.

Microchip’s Vendor ID can be sublicensed by obtaining a new Product ID from

Microchip Technology Inc. See the product or board page for link and instructions

to the sublicensing agreement. This is required only if the Microchip’s Vendor ID is

used. Changing the Vendor ID to another assigned and authorized VID does not

require any sublicensing from Microchip.

•Baud rate: A pull-down box allows a selection of the most commonly used baud

rates.

•I/O Config: This function is a binary 8-bit value that configures the I/O port to

input (logic ‘1’) or output (logic ‘0’).

•Output Default: It is the default value for the port pins configured as output. This

is also an 8-bit binary value.

•Tx/Rx LEDs: By checking this box, the LED functions are enabled on GP6 and

GP7. The “LED Function” and “Blink Duration” must be configured.

•Hardware Flow Control: This function enables the RTS and CTS pins for UART

handshaking. Not used on this board since the pins are not connected.

•USBCFG Pin: Enables the USBCFG pin on GP1. Not used on this board since

the pin is not connected.

•Suspend Pin: Enables the SSPND pin functionality on GP0. Not used on this

board since the pin is not connected.

•UART Polarity: Enables the inverse polarity for the UART pins.

•String Descriptors: Enter custom Manufacturer and Product string descriptors.

•Update VID/PID Button: This button updates the software to use the VID and

PID in the “New” boxes. For example, if the PID is changed to 0xFFFF, the

software will keep using the original 0x00DF until the Update VID/PID button is

pressed. After this, the software will switch to the 0xFFFF PID.

CAUTION

Care must be taken when changing the VID or PID because the software will be unable

to communicate to the board if a mismatch occurs.

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 16  2015 Microchip Technology Inc.

NOTES:

MCP2200 USB TO UART

WITH ISOLATION DEMO BOARD

USER’S GUIDE

 2015 Microchip Technology Inc. DS50002352A-page 17

Appendix A. Schematics and Layouts

A.1 INTRODUCTION

This appendix contains the following schematics and layouts for the MCP2200 USB to

UART with Isolation Demo Board:

• Board – Schematic

• Board – Top Copper and Silk

• Board – Top Copper

• Board – Bottom Copper

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 18  2015 Microchip Technology Inc.

A.2 BOARD – SCHEMATIC

HDR-2.54 Female 1x6

USB

DATAVIEW PO RT

USB MINI-B Female

VBUS

GND

D-

D+

5V_USB

GND_USB

MCP2200

0.1 uF

0603

0.1 uF

0603

4.7k

0603

5V_USB

USB_P

USB_N

USB_P

USB_N

0603

5V_USB

GND_USB

GND_USB 5V_USB

GND_USB

0.1 uF

0603

5V_USB

GND_USB

GND

3.3D

0.1 uF

0603

3.3D

GND

MCP2200_TX

MCP2200_RX

PICkit ™ Serial

3.3D

RED

LD2

GREEN

LD1

GREEN

LD3

3.3D

GND

0603

12 MHz

18 pF

0603

18 pF

0603

GND_USB

MCP2200

VDD

OSC1

OSC2

RST

GP7/TxLED

GP6/RxLED

GP5

GP4

GP3

10 RTS 11

RX 12

CTS 13

GP2 14

GP1 15

GP0 16

VUSB 17

D- 18

D+ 19

VSS 20

VDD

OSC1

OSC2

RST

GP7/TxLED

GP6/RxLED

GP5

GP4

GP3

RTS

CTS

GP2

GP1

GP0

VUSB

D-

VSS

FOD8012

VDD1

VOA

VIB

GND1

VDD2 8

VIA 7

VOB 6

GND2 5

VDD1

VOA

VIB

GND1

VDD2

VIA

VOB

GND2

GND

 2015 Microchip Technology Inc. DS50002352A-page 19

A.3 BOARD – TOP COPPER AND SILK

A.4 BOARD – TOP COPPER

A.5 BOARD – BOTTOM COPPER

MCP2200 USB to UART with Isolation Demo Board User’s Guide

DS50002352A-page 20  2015 Microchip Technology Inc.

NOTES:

MCP2200 USB TO UART

WITH ISOLATION DEMO BOARD

USER’S GUIDE

 2015 Microchip Technology Inc. DS50002352A-page 21

Appendix B. Bill of Materials (BOM)

TABLE B-1: BILL OF MATERIALS (BOM)

Qty Reference Description Manufacturer Part Number

4 C1, C2, C3, C4 Cap. ceramic 0.1 µF 16V 10% X7R SMD

0603

Samsung

Electro-Mechanics

America, Inc.

CL10B104KO8NNNC

2 C5, C6 Cap. ceramic 18 pF 50V 5% NP0 SMD 0603 Kemet® C0603C180J5GACTU

1 CBL1 Mech. HW cable USB-A Male to Mini

USB-B Male 3 ft Black

Katerno 10UM-02103BK

1 J1 Conn. USB Mini-B Female SMD R/A Hirose Electric Co.,

Ltd.

UX60-MB-5ST

1 J2 Conn. HDR-2.54 Female 1x6 Gold TH R/A Sullins Connector

Solutions

PPPC061LGBN-RC

2LD1, LD3 Diode LED Green 2.2V 25 mA 10 mcd

Diffuse RAD 1.8 mm Kingbright Corp. WP4060GD

1LD2 Diode LED Red 1.85V 30 mA 200 mcd

Diffuse RAD 1.8 mm Kingbright Corp. WP4060SRD

3 M1, M2, M3 Mech. HW stand-off LED T1-3/4 0.120"

Black

Bivar, Inc. LTM-120

1 R1 Res. TKF 4.7k 5% 1/10W SMD 0603 Yageo Corporation RC0603JR-074K7L

3 R2, R3, R4 Res. TKF 1k 5% 1/10W SMD 0603 Panasonic® - ECG ERJ-3GEYJ102V

1 U1 MCHP Interface USB UART

MCP2200-I/SS SSOP-20

Microchip

Technology Inc.

MCP2200-I/SS

1 U2 IC Photo FOD8012 Bi-Dir 3.3V and 5V

SOIC-8

Fairchild

Semiconductor®FOD8012

1 X1 Crystal 12 MHz 18 pF SMD HC49/US Abracon®

Corporation

ABLS-12.000MHZ-B4-T

1 Enclosure Custom Enclosure —N/A

Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The

released BOM used in manufacturing uses all RoHS-compliant components.

DS50002352A-page 22  2015 Microchip Technology Inc.

AMERICAS

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200

Fax: 480-792-7277

Technical Support:

http://www.microchip.com/

support

Web Address:

www.microchip.com

Atlanta

Duluth, GA

Tel: 678-957-9614

Fax: 678-957-1455

Austin, TX

Tel: 512-257-3370

Boston

Westborough, MA

Tel: 774-760-0087

Fax: 774-760-0088

Chicago

Itasca, IL

Tel: 630-285-0071

Fax: 630-285-0075

Cleveland

Independence, OH

Tel: 216-447-0464

Fax: 216-447-0643

Dallas

Addison, TX

Tel: 972-818-7423

Fax: 972-818-2924

Detroit

Novi, MI

Tel: 248-848-4000

Houston, TX

Tel: 281-894-5983

Indianapolis

Noblesville, IN

Tel: 317-773-8323

Fax: 317-773-5453

Los Angeles

Mission Viejo, CA

Tel: 949-462-9523

Fax: 949-462-9608

New York, NY

Tel: 631-435-6000

San Jose, CA

Tel: 408-735-9110

Canada - Toronto

Tel: 905-673-0699

Fax: 905-673-6509

ASIA/PACIFIC

Asia Pacific Office

Suites 3707-14, 37th Floor

Tower 6, The Gateway

Harbour City, Kowloon

Hong Kong

Tel: 852-2943-5100

Fax: 852-2401-3431

Australia - Sydney

Tel: 61-2-9868-6733

Fax: 61-2-9868-6755

China - Beijing

Tel: 86-10-8569-7000

Fax: 86-10-8528-2104

China - Chengdu

Tel: 86-28-8665-5511

Fax: 86-28-8665-7889

China - Chongqing

Tel: 86-23-8980-9588

Fax: 86-23-8980-9500

China - Dongguan

Tel: 86-769-8702-9880

China - Hangzhou

Tel: 86-571-8792-8115

Fax: 86-571-8792-8116

China - Hong Kong SAR

Tel: 852-2943-5100

Fax: 852-2401-3431

China - Nanjing

Tel: 86-25-8473-2460

Fax: 86-25-8473-2470

China - Qingdao

Tel: 86-532-8502-7355

Fax: 86-532-8502-7205

China - Shanghai

Tel: 86-21-5407-5533

Fax: 86-21-5407-5066

China - Shenyang

Tel: 86-24-2334-2829

Fax: 86-24-2334-2393

China - Shenzhen

Tel: 86-755-8864-2200

Fax: 86-755-8203-1760

China - Wuhan

Tel: 86-27-5980-5300

Fax: 86-27-5980-5118

China - Xian

Tel: 86-29-8833-7252

Fax: 86-29-8833-7256

ASIA/PACIFIC

China - Xiamen

Tel: 86-592-2388138

Fax: 86-592-2388130

China - Zhuhai

Tel: 86-756-3210040

Fax: 86-756-3210049

India - Bangalore

Tel: 91-80-3090-4444

Fax: 91-80-3090-4123

India - New Delhi

Tel: 91-11-4160-8631

Fax: 91-11-4160-8632

India - Pune

Tel: 91-20-3019-1500

Japan - Osaka

Tel: 81-6-6152-7160

Fax: 81-6-6152-9310

Japan - Tokyo

Tel: 81-3-6880- 3770

Fax: 81-3-6880-3771

Korea - Daegu

Tel: 82-53-744-4301

Fax: 82-53-744-4302

Korea - Seoul

Tel: 82-2-554-7200

Fax: 82-2-558-5932 or

82-2-558-5934

Malaysia - Kuala Lumpur

Tel: 60-3-6201-9857

Fax: 60-3-6201-9859

Malaysia - Penang

Tel: 60-4-227-8870

Fax: 60-4-227-4068

Philippines - Manila

Tel: 63-2-634-9065

Fax: 63-2-634-9069

Singapore

Tel: 65-6334-8870

Fax: 65-6334-8850

Taiwan - Hsin Chu

Tel: 886-3-5778-366

Fax: 886-3-5770-955

Taiwan - Kaohsiung

Tel: 886-7-213-7828

Taiwan - Taipei

Tel: 886-2-2508-8600

Fax: 886-2-2508-0102

Thailand - Bangkok

Tel: 66-2-694-1351

Fax: 66-2-694-1350

EUROPE

Austria - Wels

Tel: 43-7242-2244-39

Fax: 43-7242-2244-393

Denmark - Copenhagen

Tel: 45-4450-2828

Fax: 45-4485-2829

France - Paris

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

Germany - Dusseldorf

Tel: 49-2129-3766400

Germany - Munich

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

Germany - Pforzheim

Tel: 49-7231-424750

Italy - Milan

Tel: 39-0331-742611

Fax: 39-0331-466781

Italy - Venice

Tel: 39-049-7625286

Netherlands - Drunen

Tel: 31-416-690399

Fax: 31-416-690340

Poland - Warsaw

Tel: 48-22-3325737

Spain - Madrid

Tel: 34-91-708-08-90

Fax: 34-91-708-08-91

Sweden - Stockholm

Tel: 46-8-5090-4654

UK - Wokingham

Tel: 44-118-921-5800

Fax: 44-118-921-5820

Worldwide Sales and Service

01/27/15