SN54LVC04A, SN74LVC04A
HEX INVERTERS
SCAS281I – JANUARY 1993 – REVISED OCT OBER 1998
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
D
EPIC
(Enhanced-Performance Implanted
CMOS) Submicron Process
D
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D
Latch-Up Performance Exceeds 250 mA Per
JESD 17
D
Typical VOLP (Output Ground Bounce)
< 0.8 V at VCC = 3.3 V, TA = 25°C
D
Typical VOHV (Output VOH Undershoot)
> 2 V at VCC = 3.3 V, TA = 25°C
D
Inputs Accept Voltages to 5.5 V
D
Package Options Include Plastic
Small-Outline (D), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages, and Ceramic Chip Carriers (FK)
description
The SN54LVC04A hex inverter contains six
independent inverters designed for 2.7-V to 3.6-V
VCC operation and the SN74L VC04A hex inverter
contains six independent inverters designed for
1.65-V to 3.6-V VCC operation.
The ’LVC04A devices perform the Boolean
function Y = A.
Inputs can be driven from either 3.3-V or 5-V
devices. This feature allows the use of these
devices as translators in a mixed 3.3-V/5-V
system environment.
The SN54LVC04A is characterized for operation
over the full millitary temperature range from
–55°C to 125°C. The SN74LVC04A is
characterized for operation from –40°C to 85°C.
FUNCTION TABLE
(each inverter)
INPUT
AOUTPUT
Y
H L
L H
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1A
1Y
2A
2Y
3A
3Y
GND
VCC
6A
6Y
5A
5Y
4A
4Y
SN54LVC04A ...J OR W PACKAGE
SN74LVC04A . . . D, DB, OR PW PACKAGE
(TOP VIEW)
3212019
910111213
4
5
6
7
8
18
17
16
15
14
6Y
NC
5A
NC
5Y
2A
NC
2Y
NC
3A
1Y
1A
NC
4Y
4A V
6A
3Y
GND
NC
SN54LVC04A . . . FK PACKAGE
(TOP VIEW)
CC
NC – No internal connection
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
SN54LVC04A, SN74LVC04A
HEX INVERTERS
SCAS281I – JANUARY 1993 – REVISED OCT OBER 1998
2POST OFFICE BOX 655303 DALLAS, TEXAS 75265
logic symbol
1
1A 3
2A
1Y
2
5
3A 9
4A
2Y
4
11
5A 13
6A
3Y
6
4Y
8
1
5Y
10
6Y
12
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, DB, J, PW, and W packages.
logic diagram, each inverter (positive logic)
AY
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC –0.5 V to 6.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Note 1) –0.5 V to 6.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, VO (see Notes 1 and 2) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, IO ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through VCC or GND ±100 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θJA (see Note 3): D package 127°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DB package 158°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 170°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The value of VCC is provided in the recommended operating conditions table.
3. The package thermal impedance is calculated in accordance with JESD 51.
SN54LVC04A, SN74LVC04A
HEX INVERTERS
SCAS281I – JANUARY 1993 – REVISED OCT OBER 1998
3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
recommended operating conditions (see Note 4)
SN54LVC04A SN74LVC04A
UNIT
MIN MAX MIN MAX
UNIT
VCC
Su
pp
ly voltage
Operating 2 3.6 1.65 3.6
V
V
CC
S
u
ppl
y v
oltage
Data retention only 1.5 1.5
V
VCC = 1.65 V to 1.95 V 0.65 ×VCC
VIH High-level input voltage VCC = 2.3 V to 2.7 V 1.7 V
VCC = 2.7 V to 3.6 V 2 2
VCC = 1.65 V to 1.95 V 0.35 ×VCC
VIL Low-level input voltage VCC = 2.3 V to 2.7 V 0.7 V
VCC = 2.7 V to 3.6 V 0.8 0.8
VIInput voltage 0 5.5 0 5.5 V
VOOutput voltage 0 VCC 0 VCC V
VCC = 1.65 V –4
IOH
High level out
p
ut current
VCC = 2.3 V –8
mA
I
OH
High
-
le
v
el
o
u
tp
u
t
c
u
rrent
VCC = 2.7 V –12 –12
mA
VCC = 3 V –24 –24
VCC = 1.65 V 4
IOL
Low level out
p
ut current
VCC = 2.3 V 8
mA
I
OL
Lo
w-
le
v
el
o
u
tp
u
t
c
u
rrent
VCC = 2.7 V 12 12
mA
VCC = 3 V 24 24
TAOperating free-air temperature –55 125 –40 85 °C
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs
, literature number SCBA004.
SN54LVC04A, SN74LVC04A
HEX INVERTERS
SCAS281I – JANUARY 1993 – REVISED OCT OBER 1998
4POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
V
SN54LVC04A SN74LVC04A
UNIT
PARAMETER
TEST
CONDITIONS
V
CC MIN TYPMAX MIN TYPMAX
UNIT
IOH = 100 µA
1.65 V to 3.6 V VCC–0.2
I
OH = –
100
µ
A
2.7 V to 3.6 V VCC–0.2
IOH = –4 mA 1.65 V 1.2
VOH IOH = –8 mA 2.3 V 1.7 V
IOH =12mA
2.7 V 2.2 2.2
I
OH = –
12
mA
3 V 2.4 2.4
IOH = –24 mA 3 V 2.2 2.2
IOL = 100 µA
1.65 V to 3.6 V 0.2
I
OL =
100
µ
A
2.7 V to 3.6 V 0.2
VOL
IOL = 4 mA 1.65 V 0.45
V
V
OL IOL = 8 mA 2.3 V 0.7
V
IOL = 12 mA 2.7 V 0.4 0.4
IOL = 24 mA 3 V 0.55 0.55
IIVI = 5.5 V or GND 3.6 V ±5±5µA
ICC VI = VCC or GND, IO = 0 3.6 V 10 10 µA
ICC One input at VCC – 0.6 V,
Other inputs at VCC or GND 2.7 V to 3.6 V 500 500 µA
CiVI = VCC or GND 3.3 V 5 5 pF
All typical values are at VCC = 3.3 V, TA = 25°C.
switching characteristics over recommended operating free-air temperature range (unless
otherwise noted) (see Figure 3)
SN54LVC04A
PARAMETER FROM
(INPUT) TO
(OUTPUT) VCC = 2.7 V VCC = 3.3 V
± 0.3 V UNIT
MIN MAX MIN MAX
tpd A Y 5.5 0.5 4.5 ns
switching characteristics over recommended operating free-air temperature range (unless
otherwise noted) (see Figures 1 through 3)
SN74LVC04A
PARAMETER FROM
(INPUT) TO
(OUTPUT) VCC = 1.8 V VCC = 2.5 V
± 0.2 V VCC = 2.7 V VCC = 3.3 V
± 0.3 V UNIT
TYP MIN MAX MIN MAX MIN MAX
tpd A Y 13.5 1 7.5 5.5 1 4.5 ns
tsk(o)1 ns
Skew between any two outputs of the same package switching in the same direction
operating characteristics, TA = 25°C
PARAMETER
TEST VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V
UNIT
PARAMETER
CONDITIONS TYP TYP TYP
UNIT
Cpd Power dissipation capacitance per inverter f = 10 MHz 6 7 8 pF
SN54LVC04A, SN74LVC04A
HEX INVERTERS
SCAS281I – JANUARY 1993 – REVISED OCT OBER 1998
5
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
VCC = 1.8 V ± 0.15 V
VCC/2
VCC/2
VCC/2VCC/2
VCC/2VCC/2
VCC/2
VCC/2
VOH
VOL
th
tsu
From Output
Under Test
CL = 30 pF
(see Note A)
LOAD CIRCUIT
S1 Open
GND
1 k
1 k
Output
Control
(low-level
enabling)
Output
W aveform 1
S1 at 2 × VCC
(see Note B)
Output
W aveform 2
S1 at Open
(see Note B)
tPZL
tPZH
tPLZ
tPHZ
0 V
VOL + 0.15 V
VOH – 0.15 V
0 V
VCC
0 V
0 V
tw
VCC VCC
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
Timing
Input
Data
Input
Input
tpd
tPLZ/tPZL
tPHZ/tPZH
Open
2 × VCC
Open
TEST S1
NOTES: A. CL includes probe and jig capacitance.
B. W aveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
W aveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR 0 MHz, ZO = 50 , tr 2 ns, tf 2 ns.
D. The outputs are measured one at a time with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
0 V
VCC
VCC/2
tPHL
VCC/2 VCC/2 VCC
0 V
VOH
VOL
Input
Output
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VCC/2 VCC/2
tPLH
2 × VCC
VCC
Figure 1. Load Circuit and Voltage Waveforms
SN54LVC04A, SN74LVC04A
HEX INVERTERS
SCAS281I – JANUARY 1993 – REVISED OCT OBER 1998
6POST OFFICE BOX 655303 DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
VCC = 2.5 V ± 0.2 V
VCC/2
VCC/2
VCC/2VCC/2
VCC/2VCC/2
VCC/2
VCC/2
VOH
VOL
th
tsu
From Output
Under Test
CL = 30 pF
(see Note A)
LOAD CIRCUIT
S1 Open
GND
500
500
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 2 × VCC
(see Note B)
Output
W aveform 2
S1 at GND
(see Note B)
tPZL
tPZH
tPLZ
tPHZ
0 V
VOL + 0.15 V
VOH – 0.15 V
0 V
VCC
0 V
0 V
tw
VCC VCC
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
Timing
Input
Data
Input
Input
tpd
tPLZ/tPZL
tPHZ/tPZH
Open
2 × VCC
GND
TEST S1
NOTES: A. CL includes probe and jig capacitance.
B. W aveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
W aveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR10 MHz, ZO = 50 , tr2 ns, tf2 ns.
D. The outputs are measured one at a time with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
0 V
VCC
VCC/2
tPHL
VCC/2 VCC/2 VCC
0 V
VOH
VOL
Input
Output
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VCC/2 VCC/2
tPLH
2 × VCC
VCC
Figure 2. Load Circuit and Voltage Waveforms
SN54LVC04A, SN74LVC04A
HEX INVERTERS
SCAS281I – JANUARY 1993 – REVISED OCT OBER 1998
7
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
VCC = 2.7 V AND 3.3 V ± 0.3 V
VOH
VOL
th
tsu
From Output
Under Test
CL = 50 pF
(see Note A)
LOAD CIRCUIT
S1 6 V
Open
GND
500
500
tPLH tPHL
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 6 V
(see Note B)
Output
W aveform 2
S1 at GND
(see Note B)
tPZL
tPZH
tPLZ
tPHZ
1.5 V1.5 V
1.5 V 1.5 V 2.7 V
0 V
1.5 V 1.5 V VOH
VOL
0 V
1.5 V VOL + 0.3 V
1.5 V VOH – 0.3 V
0 V
1.5 V 2.7 V
0 V
1.5 V 1.5 V 0 V
2.7 V
0 V
1.5 V 1.5 V
tw
Input
2.7 V 2.7 V
3 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
Timing
Input
Data
Input
Output
Input
tpd
tPLZ/tPZL
tPHZ/tPZH
Open
6 V
GND
TEST S1
NOTES: A. CL includes probe and jig capacitance.
B. W aveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
W aveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR10 MHz, ZO = 50 , tr2.5 ns, tf2.5 ns.
D. The outputs are measured one at a time with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
Figure 3. Load Circuit and Voltage Waveforms
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated