1.5KE150CAE3 - Vishay Presicion Group

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303

Vishay General Semiconductor

Document Number: 88301

Revision: 22-Oct-08

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

TRANSZORB® Transient Voltage Suppressors

FEATURES

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 1500 W peak pulse power capability with a

10/1000 µs waveform, repetitive rate (duty

cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Solder dip 260 °C, 40 s

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and

lighting on ICs, MOSFET, signal lines of sensor units

for consumer, computer, industrial, automotive and

telecommunication.

MECHANICAL DATA

Case: Molded epoxy body over passivated junction

Molding compound meets UL 94 V-0 flammability

rating

Base P/N-E3 - RoHS compliant, commercial grade

Base P/NHE3 - RoHS compliant, high reliability/

automotive grade (AEC Q101 qualified)

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3

suffix meets JESD 201 class 2 whisker test

Note:

• 1.5KE250 ~ 1.5KE540A and 1.5KE250C ~ 1.5KE440CA for

commercial grade only

Polarity: For uni-directional types the color band

denotes cathode end, no marking on bi-directional

types

DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional types, use C or CA suffix

(e.g. 1.5KE440CA).

Electrical characteristics apply in both directions.

PRIMARY CHARACTERISTICS

VBR uni-directional 6.8 V to 540 V

VBR bi-directional 6.8 V to 440 V

PPPM 1500 W

PD6.5 W

IFSM (uni-directional only) 200 A

TJ max. 175 °C

Case Style 1.5KE

Notes:

(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2

(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum

(3) VF = 3.5 V for 1.5KE220 (A) and below; VF = 5.0 V for 1.5KE250(A) and above

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL LIMIT UNIT

Peak pulse power dissipation with a 10/1000 µs waveform (1) (Fig. 1) PPPM 1500 W

Peak pulse current with a 10/1000 µs waveform (1) IPPM See next table A

Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5) PD6.5 W

Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) IFSM 200 A

Maximum instantaneous forward voltage at 100 A for uni-directional only (3) VF3.5/5.0 V

Operating junction and storage temperature range TJ, TSTG - 55 to + 175 °C

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303

Vishay General Semiconductor

www.vishay.com For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88301

Revision: 22-Oct-08

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

JEDEC

TYPE

NUMBER

GENERAL

SEMICONDUCTOR

PART NUMBER

BREAKDOWN

VOLTAGE

AT I

(1)

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

(V)

MAXIMUM

REVERSE

LEAKAGE

AT V

(4)

(µA)

MAXIMUM

PEAK

PULSE

CURRENT

PPM (2)

(A)

MAXIMUM

CLAMPING

VOLTAGE

AT I

PPM

(V)

MAXIMUM

TEMP.

COEFFICIENT

OF V

(%/°C)

MIN. MAX.

1N6267 (+)1.5KE6.8 6.12 7.48 10 5.50 1000 139 10.8 0.057

1N6267A (+)1.5KE6.8A 6.45 7.14 10 5.80 1000 143 10.5 0.057

1N6268 (+)1.5KE7.5 6.75 8.25 10 6.05 500 128 11.7 0.061

1N6268A (+)1.5KE7.5A 7.13 7.88 10 6.40 500 133 11.3 0.061

1N6269 (+)1.5KE8.2 7.38 9.02 10 6.63 200 120 12.5 0.065

1N6269A (+)1.5KE8.2A 7.79 8.61 10 7.02 200 124 12.1 0.065

1N6270 (+)1.5KE9.1 8.19 10.0 1.0 7.37 50 109 13.8 0.068

1N6270A (+)1.5KE9.1A 8.65 9.55 1.0 7.78 50 112 13.4 0.068

1N6271 (+)1.5KE10 9.00 11.0 1.0 8.10 10 100 15.0 0.073

1N6271A (+)1.5KE10A 9.50 10.5 1.0 8.55 10 103 14.5 0.073

1N6272 (+)1.5KE11 9.90 12.1 1.0 8.92 5.0 92.6 16.2 0.075

1N6272A (+)1.5KE11A 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075

1N6273 (+)1.5KE12 10.8 13.2 1.0 9.72 5.0 86.7 17.3 0.076

1N6273A (+)1.5KE12A 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078

1N6274 (+)1.5KE13 11.7 14.3 1.0 10.5 5.0 78.9 19.0 0.081

1N6274A (+)1.5KE13A 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081

1N6275 (+)1.5KE15 13.5 16.5 1.0 12.1 1.0 68.2 22.0 0.084

1N6275A (+)1.5KE15A 14.3 15.8 1.0 12.8 1.0 70.8 21.2 0.084

1N6276 (+)1.5KE16 14.4 17.6 1.0 12.9 1.0 63.8 23.5 0.086

1N6276A (+)1.5KE16A 15.2 16.8 1.0 13.6 1.0 66.7 22.5 0.086

1N6277 (+)1.5KE18 16.2 19.8 1.0 14.5 1.0 56.6 26.5 0.088

1N6277A (+)1.5KE18A 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.089

1N6278 (+)1.5KE20 18.0 22.0 1.0 16.2 1.0 51.5 29.1 0.090

1N6278A (+)1.5KE20A 19.0 21.0 1.0 17.1 1.0 54.2 27.7 0.090

1N6279 (+)1.5KE22 19.8 24.2 1.0 17.8 1.0 47.0 31.9 0.092

1N6279A (+)1.5KE22A 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092

1N6280 (+)1.5KE24 21.6 26.4 1.0 19.4 1.0 43.2 34.7 0.094

1N6280A (+)1.5KE24A 22.8 25.2 1.0 20.5 1.0 45.2 33.2 0.094

1N6281 (+)1.5KE27 24.3 29.7 1.0 21.8 1.0 38.4 39.1 0.096

1N6281A (+)1.5KE27A 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096

1N6282 (+)1.5KE30 27.0 33.0 1.0 24.3 1.0 34.5 43.5 0.097

1N6282A (+)1.5KE30A 28.5 31.5 1.0 25.6 1.0 36.2 41.4 0.097

1N6283 (+)1.5KE33 29.7 36.3 1.0 26.8 1.0 31.4 47.7 0.098

1N6283A (+)1.5KE33A 31.4 34.7 1.0 28.2 1.0 32.8 45.7 0.098

1N6284 (+)1.5KE36 32.4 39.6 1.0 29.1 1.0 28.8 52.0 0.099

1N6284A (+)1.5KE36A 34.2 37.8 1.0 30.8 1.0 30.1 49.9 0.099

1N6285 (+)1.5KE39 35.1 42.9 1.0 31.6 1.0 26.6 56.4 0.100

1N6285A (+)1.5KE39A 37.1 41.0 1.0 33.3 1.0 27.8 53.9 0.100

1N6286 (+)1.5KE43 38.7 47.3 1.0 34.8 1.0 24.2 61.9 0.101

1N6286A (+)1.5KE43A 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101

1N6287 (+)1.5KE47 42.3 51.7 1.0 38.1 1.0 22.1 67.8 0.101

1N6287A (+)1.5KE47A 44.7 49.4 1.0 40.2 1.0 23.1 64.8 0.101

1N6288 (+)1.5KE51 45.9 56.1 1.0 41.3 1.0 20.4 73.5 0.102

1N6288A (+)1.5KE51A 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102

1N6289 (+)1.5KE56 50.4 61.8 1.0 45.4 1.0 18.6 80.5 0.103

1N6289A (+)1.5KE56A 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103

1N6290 (+)1.5KE62 55.8 68.2 1.0 50.2 1.0 16.9 89.0 0.104

1N6290A (+)1.5KE62A 58.9 65.1 1.0 53.0 1.0 17.6 85.0 0.104

1N6291 (+)1.5KE68 61.2 74.8 1.0 55.1 1.0 15.3 98.0 0.104

1N6291A (+)1.5KE68A 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104

1N6292 (+)1.5KE75 67.5 82.5 1.0 60.7 1.0 13.9 109 0.105

1N6292A (+)1.5KE75A 71.3 78.8 1.0 64.1 1.0 14.6 104 0.105

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303

Vishay General Semiconductor

Document Number: 88301

Revision: 22-Oct-08

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

Notes:

(1) Pulse test: tp ≤ 50 ms

(2) Surge current waveform per Fig. 3 and derate per Fig. 2

(3) All terms and symbols are consistent with ANSI/IEEE CA62.35

(4) For bi-directional types with VR 10 V and less the ID limit is doubled

* Bi-directional versions are UL approved under component across the line protection, ULV1414 file number E108274 (1.5KE200CA,

1.5KE220CA)

(+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number

E136766 for both uni-directional and bi-directional devices

1N6293 (+)1.5KE82 73.8 90.2 1.0 66.4 1.0 12.7 118 0.105

1N6293A (+)1.5KE82A 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105

1N6294 (+)1.5KE91 81.9 100.0 1.0 73.7 1.0 11.5 131 0.106

1N6294A (+)1.5KE91A 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106

1N6295 (+)1.5KE100 90.0 110 1.0 81.0 1.0 10.4 144 0.106

1N6295A (+)1.5KE100A 95.0 105 1.0 85.5 1.0 10.9 137 0.106

1N6296 (+)1.5KE110 99.0 121 1.0 89.2 1.0 9.5 158 0.107

1N6296A (+)1.5KE 110A 105 116 1.0 94.0 1.0 9.9 152 0.107

1N6297 (+)1.5KE120 108 132 1.0 97.2 1.0 8.7 173 0.107

1N6297A (+)1.5KE120A 114 126 1.0 102 1.0 9.1 165 0.107

1N6298 (+)1.5KE130 117 143 1.0 105 1.0 8.0 187 0.107

1N6298A (+)1.5KE130A 124 137 1.0 111 1.0 8.4 179 0.107

1N6299 (+)1.5KE150 136 165 1.0 121 1.0 7.0 215 0.108

1N6299A (+)1.5KE150A 143 158 1.0 128 1.0 7.2 207 0.106

1N6300 (+)1.5KE160 144 176 1.0 130 1.0 6.5 230 0.106

1N6300A (+)1.5KE160A 152 168 1.0 136 1.0 6.8 219 0.108

1N6301 (+)1.5KE170 153 187 1.0 138 1.0 6.1 244 0.108

1N6301A (+)1.5KE170A 162 179 1.0 145 1.0 6.4 234 0.108

1N6302 1.5KE180 162 198 1.0 146 1.0 5.8 258 0.108

1N6302A 1.5KE180A 171 189 1.0 154 1.0 6.1 246 0.108

1N6303 1.5KE200 180 220 1.0 162 1.0 5.2 287 0.108

1N6303A 1.5KE200A* 190 210 1.0 171 1.0 5.5 274 0.108

1.5KE220 198 242 1.0 175 1.0 4.4 344 0.108

1.5KE220A* 209 231 1.0 185 1.0 4.6 328 0.108

1.5KE250 225 275 1.0 202 1.0 4.2 360 0.110

1.5KE250A 237 263 1.0 214 1.0 4.4 344 0.110

1.5KE300 270 330 1.0 243 1.0 3.5 430 0.110

1.5KE300A 285 315 1.0 256 1.0 3.6 414 0.110

1.5KE350 315 385 1.0 284 1.0 3.0 504 0.110

1.5KE350A 333 368 1.0 300 1.0 3.1 482 0.110

1.5KE400 360 440 1.0 324 1.0 2.6 574 0.110

1.5KE400A 380 420 1.0 342 1.0 2.7 548 0.110

1.5KE440 396 484 1.0 356 1.0 2.4 631 0.110

1.5KE440A 418 462 1.0 376 1.0 2.5 602 0.110

1.5KE480 432 528 1.0 389 1.0 2.19 686 0.110

1.5KE480A 456 504 1.0 408 1.0 2.28 658 0.110

1.5KE510 459 561 1.0 413 1.0 2.06 729 0.110

1.5KE510A 485 535 1.0 434 1.0 2.15 698 0.110

1.5KE540 486 594 1.0 437 1.0 1.94 772 0.110

1.5KE540A 513 567 1.0 459 1.0 2.03 740 0.110

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

JEDEC

TYPE

NUMBER

GENERAL

SEMICONDUCTOR

PART NUMBER

BREAKDOWN

VOLTAGE

AT I

(1)

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

(V)

MAXIMUM

REVERSE

LEAKAGE

AT V

(4)

(µA)

MAXIMUM

PEAK

PULSE

CURRENT

PPM (2)

(A)

MAXIMUM

CLAMPING

VOLTAGE

AT I

PPM

(V)

MAXIMUM

TEMP.

COEFFICIENT

OF V

(%/°C)

MIN. MAX.

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303

Vishay General Semiconductor

www.vishay.com For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88301

Revision: 22-Oct-08

Note:

(1) Automotive grade AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Typical thermal resistance, junction to ambient RθJA 75 °C/W

Typical thermal resistance, junction to lead RθJL 15.4

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

1.5KE6.8A-E3/54 0.968 54 1400 13" diameter paper tape and reel

1.5KE6.8AHE3/54 (1) 0.968 54 1400 13" diameter paper tape and reel

Figure 1. Peak Pulse Power Rating Curve

Figure 2. Pulse Power or Current vs. Initial Junction Temperature

0.1

100

0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms

td - Pulse Width (s)

PPM

- Peak Pulse Power (kW)

100

0 25 50 75 100 125 150 175 200

Peak Pulse Power (P

) or Current (I

)

Derating in Percentage, %

TJ - Initial Temperature (°C)

Figure 3. Pulse Waveform

Figure 4. Typical Junction Capacitance

100

150

= 10 µs

Peak Value

PPM

Half Value -

PPM

10/1000 µs Waveform

as defined by R.E.A.

01.0 2.0 3.0 4.0

t - Time (ms)

PPM

- Peak Pulse Current, % I

RSM

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

510 100 500

100

1000

10 000

Uni-Directional

Bi-Directional

VR = 0

VR = Rated

Stand-Off Voltage

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

VBR - Breakdown Voltage (V)

- Capacitance (pF)

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303

Vishay General Semiconductor

www.vishay.com For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88301

Revision: 22-Oct-08

Figure 5. Power Derating Curve

Figure 6. Maximum Non-Repetitive Forward Surge Current

Uni-Directional only

Figure 7. Incremental Clamping Voltage Curve (Uni-Directional)

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0 25 50 75 100 125 150 175 200

- Power Dissipation (W)

TL - Lead Temperature (°C)

L = 0.375" (9.5 mm)

Lead Lengths

110 100

100

200

TJ = TJ max.

8.3 ms Single Half Sine-Wave

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

0.5 1210 20 50

0.1

0.2

1.0

2.0

100

Waveform:

8/20 µsImpulse 1.5KE200

1.5KE6.8

1.5KE9.1

1.5KE18

1.5KE12

1.5KE130

1.5KE100

1.5KE75

1.5KE39

1.5KE33

IPP - Peak Pulse Current (A)

ΔVC - Incremental Clamping Voltage

ΔV

= V

- V

Figure 8. Incremental Clamping Voltage Curve (Uni-Directional)

Figure 9. Incremental Clamping Voltage Curve (Bi-directional)

Figure 10. Incremental Clamping Voltage Curve (Bi-Directional)

0.5 1210 50

0.1

0.2

1.0

2.0

100

ΔV

- Incremental Clamping Voltage

Waveform:

10/1000 µs Impulse

ΔVC = VC - VBR

1.5KE200

1.5KE130

1.5KE75

1.5KE39

1.5KE33

1.5KE6.8

1.5KE9.1

- Peak Pulse Current (A)

0.5 1210 20 50

1.5KE200C

1.5KE75C

1.5KE39C

1.5KE15C

11C

1.5KE7.5C

1.5KE30C

0.1

0.2

1.0

2.0

100

Waveform:

10/1000 µsImpulse

IPP - Peak Pulse Current (A)

ΔVC - Incremental Clamping Voltage

ΔV

= V

- V

0.5 12.0 10 20 50

1.5KE200C

1.5KE75C

1.5KE39C

1.5KE15C

1.5KE11C

1.5KE7.5C

1.5KE30C

0.1

0.2

100

IPP - Peak Pulse Current (A)

Waveform:

8/20 µsImpulse

ΔVC - Incremental Clamping Voltage

ΔVC = VC - VBR

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303

Vishay General Semiconductor

www.vishay.com For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88301

Revision: 22-Oct-08

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

APPLICATION NOTES

• This series of Silicon Transient Suppressors is

used in applications where large voltage transients

can permanently damage voltage-sensitive

components.

• The TVS diode can be used in applications where

induced lightning on rural or remote transmission

lines presents a hazard to electronic circuitry (ref:

R.E.A. specification P.E. 60).

• This Transient Voltage Suppressor diode has

a pulse power rating of 1500 W for 1 ms. The

response time of TVS diode clamping action

is effectively instantaneous (1 x 10-9 s

bi-directional); therefore, they can protect

integrated circuits, MOS devices, hybrids, and

other voltage sensitive semiconductors and

components. TVS diodes can also be used in

series or parallel to increase the peak power

ratings.

Figure 11. Instantaneous Forward Voltage Characteristics Curve

0 0.4 0.8 1.2 1.6 2.0

0.1

100

Instantaneous Forward Current (A)

Instantaneous Forward Voltage (V)

TJ = 25 °C

Pulse Width = 300 µs

1 % Duty Cycle

Figure 12. Typical Transient Thermal Impedance

100

0.1

0.001 0.01 0.1 1 10 100 1000

tp - Pulse Duration (s)

Transient Thermal Impedance (°C/W)

1.0 (25.4)

MIN.

1.0 (25.4)

MIN.

0.375 (9.5)

0.285 (7.2)

0.210 (5.3)

0.190 (4.8)

DIA.

0.042 (1.07)

0.038 (0.96)

DIA.

Case Style 1.5KE

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.