Signal Relays AXICOM IM Relay n n n n n Slim line 10x6mm, low profile 5.65mm and min. board-space 60mm2 Switching current 2/5A, switching power 60W/62.5VA and switching voltage 220VDC/250VAC Low coil power consumption, 140mW standard, 100mW for high sensitive version, 50mW for ultra high sensitive version and 100mW for bistable version High dielectric and surge capability up to 2500Vrms between open contacts and 3000Vrms between coil and contacts High mechanical shock resistance up to 300g functional IM_ Typical applications Telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, AXICOMESignalERelays measurement and test equipment, industrial control, medical equipment, IM Relay automotive applications U 108-98001 Rev. M Approvals Contact Data Contact Data (continued) UL 508 File No. E 111441 Electrical endurance at contact application 0 IM-D IM-E (30mV/10mA) min. 2.5x106 operations Number of contacts and type 1EPoleEbreak 1EPoleEmake 1EPoleEE 2EPoleEbreak 2EPoleEmake Contact Data standard, C D P min. 2.0x106 operations changeover cable load open end Contact assembly BifurcatedEcontacts standard and high high contact resistive, 125VDC / 0.24A - 30W min. 5x105 operations Contact material Palladium-ruthenium,Egold-covered high dielectric current stability resistive, 220 VDC / 0.27A - 60W min. 1x105 operations Limiting continuous current 2EA 2EA 4EA 2EA250VAC / 2EA version version version resistive, 0.25A - 62.5VA min. 1x105 operations at max. ambient temperature Contact arrangement 2 form C, 2 CO resistive, 30VDC / 1A - 30W min. 5x105 operations Maximum switching current 2EA 2EA 3EA 2EA 2EA Max. switching voltage 220VDC, 220VDC, 220VDC, resistive, 30VDC / 2A 60W min. 1x105 operations Maximum swichting voltage 220EVdc 250VAC 250VAC 250VAC Contact ratings, UL 220VDC, 0.24A, 60W 250EVac Maximum switching capacity Rated current 2A 5A 2A 125VDC, 0.24A, 30W 60EW,E62.5EVA Thermoelectric potential Limiting continuous current 2A 5A 2A 250VAC, 0.25A, 62.5VA <E10EV Minimum switching voltage 100EV AXICOMESignalERelays Switching power 60W, 62.5VA 125VAC, 0.5A, 62.5VA Initial contact resistance / < 100 m < 100 m NO < 100 m < 50 m < 50 m 30VDC, 2A, 60W measuring condition: 10 mA / 20 mV Contact material PdRu0 AgNi PdRu Mechanical endurance IM Relay 108 operations Electrical CC0 Contact category endurance ( 30 mV / 10+Au mA) +Au +Au min.E2.5ExE106Eoperations cable load open end min.E2.0ExE106Eoperations covered covered covered Contact style Coil Data Coil Operating Range Resistive load at 125 Vdc / 0.24 A - 30 W twin contacts min.E5ExE105Eoperations at 220 Vdc / 0.27 A - 60 W min.E1ExE105Eoperations Minimum switching voltage 100V Magnetic system monostable, bistable at 250 Vac / 0.25 A - 62.5 min.E1ExE105Eoperations Initial contact VA resistance <50m at 10mA/20mV Coil voltage range 1.5 to 24VDC 5 min.E5ExE10Eoperations Unom 3.4 at 30 Vdc / 1 A - 30 W Thermoelectric potential <10V 50mW coil min.E1ExE105Eoperations 3.2 at 30 Vdc / 2 A - 60 W typ. 1ms, max. 3ms Umax. 100mW coil Operate time Coil versions, standard version, monostable, 1 coil 3 Mechanical endurance typ.E108Eoperations at 2x1A Release time Coil Rated Operate Umax.Release Coil Rated coil Umax. at 0A 2.8 UL contact ratings 220 Vdc / 0.24 A - 60 W 2.6 without diode in parallel typ. 1ms, max. 3ms voltage voltage voltage resistance power 125 Vdc / 0.24 Acode - 30 W 2.4 Umax. at 0A Uop. min. 250 Vac / 0.25 A- 62.5 VA with diode in parallel typ. 3ms, max. 5ms VDC VDC VDC 10% mW 2.2 125 Vac / 0.5 A - 62.5 VA 2 1.5 Bounce time max. typ. 1ms, max. 5ms 00 1.13 0.15 16 140 30 Vdc / 2 A - 60 W 1.8 08 2.4 1.80 41 140 Umax. at 2x2A 0.24 1.6 01 2.25 0.30 64 140 1.4 3 Max. DC Load Breaking Capacity 1.2 4.5 Urel. min. 02 0.45 145 140 Unom. nominal coil3.38 voltage 1 03 5 3.75 0.50 178 140 Max. DC load breaking capacity 0.8 Uop min. 0.6 6 04 4.50 0.60 257 140 0.4 05 9 6.75 0.90 579 140 Urel. min. 0.2 06 9.00 1.20 1029 140 0 12 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 1 10 12 0 07 24 18.00 2.40 2880 200 Technical data of approved types on request IM-B IM-C = = Coil Voltage [U/Unom] IM-A DC Voltage [Vdc] resistive load = = Ambient Temperature [C] All figures are given for coil without pre-energization, at ambient temperature +23C Coil operating range, standard version 3.4 140mW coil 200mW coil 3.2 3 2.8 Umax. at 2x1A DC current [A] Coil Voltage [U/Unom] 2.6 All specifications subject to change. Consult Tyco Electronics for latest specifications. Umax. at 0A 2.4 2.2 Umax. at 0A 2 1.8 1.6 Umax. at 2x2A 1.4 1.2 Unom. nominal coil voltage 1 0.8 21 of 28 0.6 Urel. min. 0.4 0.2 0 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature [C] Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at 3.4 3.2 http://relays.te.com/definitions m] 04-2011, Rev. 0411 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 3 2.8 2.6 2.4 2.2 Umax. - 100% coil duty at 0A (100mW) Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. Umax. - 5%coil duty at 2x2A (100mW) Umax.-5%coil duty at 0A(100mW) Umax.-5%coil 1 No Up the coi Low the For Ure Low the IM Relay IM Relay 2 Pole 2 Pole Changeo Cha Dimensions Dimensions IM Relay (Continued) IMETHT IMETHT IMETHT IMETHT Standard Standard Narrow Narrow mm mm inch inch mm mm inch inch mm 10.00EE0.08 L 10.00EE0.08 0.393EE0.003 0.393EE0.003 10.00EE0.08 10.00EE0.08 0.393EE0.003 0.393EE0.003 10.00E 6.00EE0.08 W 6.00EE0.08 0.236EE0.003 0.236EE0.003 5.70EE0.305.70EE0.30 0.224EE0.012 EE6.00E Insulation Data standard C D,P0.224EE0.012 5.65EE0.20 H 5.65EE0.20 0.222EE0.008 0.222EE0.008 5.80EE0.085.80EE0.08 0.230EE0.003 0.230EE0.003 EE5.65E standard, high high current, T 3.2 3.2 0.125 0.125 3.2 3.2 0.125 0.125 N/A sensitive,N/A dielectric high contact N/A 7.50EE T1N/A N/A N/A N/A N/A N/A ultra high version stability 5.08EE0.10 T2 5.08EE0.10 0.200EE0.004 0.200EE0.004 3.20EE0.103.20EE0.10 0.126EE0.004 0.126EE0.004 5.08EE sensitive version 3.20EE0.15 D1 3.20EE0.15 0.126EE0.006 0.126EE0.006 3.20EE0.153.20EE0.15 0.126EE0.006 0.126EE0.006 3.20EE version 2.20EE0.15 D2 2.20EE0.15 0.087EE0.006 0.087EE0.006 2.20EE0.152.20EE0.15 0.087EE0.006 0.087EE0.006 2.20EE InitialTw dielectric 0.40 strength 0.015 0.40 0.015 0.4 0.4 0.015 0.015 0.4 between open 1000V 1500V 750Vrms S0.75 0.75contacts 0.029 0.029 0.30EE0.05 0.30EE0.05 0.011EE0.002 N/A rms rms 0.011EE0.002 L W H T Rated coilT1 power T2 mW D1 100 D2 100 Tw 100 S Coil Data (continued) AXICOM Coil versions, sensitive version, monostable, 1 coil Coil Rated Operate Release Coil code voltage voltage voltage resistance VDC VDC VDC 10% 11 3 2.40 0.30 91 12 4.5 3.60 0.45 194 13 5 4.00 0.50 234 16 12 9.60 1.20 1315 110 between contact and coil 1800Vrms 1800Vrms 1500Vrms 17 24 19.20 2.40 4120 140 between adjacent contacts 1000Vrms 1800Vrms 750Vrms Coil versions, ultra high sensitive version, monostable, 1 coil Initial surge withstand voltage Coil Rated Operate Release Coil Rated coil between open contacts 108-980011500V 2500V 1000V Rev. M AXICOMESignalERelays code voltage voltage voltage resistance power Standard between contact and coil 2500V Narrow 2500VVersion 2000V Standard Version Version Narrow Version VDC VDC VDC 10% mW between adjacent contacts108-980011500V 2500V 1000V IM Relay Rev. M AXICOMESignalERelays 21 3 2.55 0.30 180 50 Initial insulation resistance 22 4.5 3.83 0.45Relay 405 50 between insulated elements >109 >109 >109 IM 23 500 50 Capacitance Coil5 Operating4.25 Range 0.50 26 12 10.20 1.20 2880 50 between open contacts max.10.00.08 1pF 5.70.3 5.70.3 10.00.08 6.00.08 6.00.08 10.00.08 10.00.08 All figures are given for coil without pre-energization, at ambient temperature +23C between contact and coil max. 2pF Coil Operating Range Unom = between Nominal coil voltage adjacent contacts max. 2pF 3.4 50mW coil 3.2 range, sensitive and ultra high sensitive Coil operating Umax. = Upper limit of the operative range of 100mW coilcoil 1.4 0.8 1.2 0.6 1 0.4 0.8 0.2 Unom. nominal coil voltage Umax. at 2x2A Uop min. Unom. nominal coil voltage 0.60 0.4 -50 rel. min. UopUmin. 2.20.15 2.20.15 3.20.15 3.2 2.20.15 2.20.15 3.20.15 3.2 2.20.15 SMT Gull W 10. 0.30.05 0.30.05 5.80.08 5.80.08 0.75 0.75 5.65-0.2 3.2 2.20.15 2.2 1.6 2 1.4 1.8 1.2 1.61 Umax. at 0A Umax. at 0A Umax. at 2x2A 3.20.15 2.62 2.4 1.8 = Nominal coil voltage the coil voltage (limiting voltage) when coils are continously energized RF Data = Upper limit of the operative range of 0.4 0.4 0.4 0.4 the coil voltage (limiting voltage) Isolation at 100MHz/900MHz -37.0dB/-18.8dB = Lower limit of the operative rangewhen of coils arevoltage continously energized 3.20.1 3.20.1 the coil (reliable operate voltage) Insertion loss at 100MHz/900MHz -0.03dB/-0.33dB 5.080.1 5.080.1 Voltage wave ratio Uop. min. = Lower limit ofrelays the operative Forstanding latching Uset (VSWR) min.range resp.of coil min. voltage (reliable operate voltage) at the 100MHz/900MHz 1.06/1.49 Ureset For latching relays Uset min.range resp. of Urel. min. = Lower limit of the operative Ureset the coilmin. voltage (reliable release voltage) Other Data Urel. Mounting = Lower limitLayout ofHole the operative range of Mounting Hole Layout min. Material EU RoHS/ELV, China RoHS, REACH, Halogen content the compliance: coil voltage (reliable release voltage) 3.20.15 Umax. at 0A Umax. at 2x1A Unom Umax. Uop. min. 2.20.15 3 2.4 2.8 2.2 50mW Umax.coil at 0A 100mW coil 2.20.15 Umax. at 2x1A 3.2 Coil Voltage Coil [U/Unom] Voltage [U/Unom] 3 3.4 2.8 3.2 2.6 5.65-0.2 THT Version THT Version referside to theof Product Compliance Support View onto View theonto component the component side the PCB of the (top PCB view) (topCenter view)at 0.4 3.20.15 Signal Relays Copla Solder View o www.te.com/customersupport/rohssupportcenter Ambient temperature -40C to +85C 0 Thermal resistance <150K/W -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 1 10 12 0 Narrow Narrow Version Version Gull Standard Standard Version Version Ambient Temperature [C] Category of environmental protection IEC 61810 RT V - hermetically sealed 3.4 140mW coil Coil versions,3.2 standard, bistable 1 coil Degree of protection, IEC 60529 IP 67, immersion cleanable 3 200mW coil Coil Rated Set Reset Coil Rated coil Vibration resistance (functional) 20g, 10 to 500Hz 3.4 2.8 Umax. at 2x1A 3.2 140mW coil 2.6 code voltage voltage voltage resistance power Shock resistance (functional), half sinus 11ms 50g 3 2.4 200mW coil Umax. at 0A VDC VDC VDC 10% mW Shock resistance (destructive), half sinus 0.5ms 500g 2.8 2.2 Umax. at 2x1A Umax. 23 at 0A 2.6 2 40 1.5 1.13 -1.13 100 Mounting position any 2.4 1.8 Umax. at 0A 48 2.4 1.80 -1.80 58 100 Weight max. 0.75g 2.2 1.6 U2.25 max. at 2x2A Umax. at 23 1.4 41 -2.25 900A 100 Resistance to soldering heat THT 1.8 1.2 coil voltage -3.38 42 4.5 Unom. nominal 3.38 203 100 IEC 60068-2-20 265C/10s 1.61 Umax. at 2x2A 1.4 0.85 43 3.75 -3.75 250 100 Resistance to soldering heat SMT Emin.E0.75Emin.E0.75 Emin.E0.75 Emin.E0.75 1.2 0.6 coil voltage 44 6 Unom. nominal4.50 -4.50 360 100 IEC 60068-2-58 265C/10s 1 0.4 Urel. min. 0.8 45 6.75 -6.75 810 100 Moisture sensitive level, JEDEC J-Std-020D MSL3 0.29 0.60 46 12 9.00 -9.00 1440 100 Ultrasonic cleaning not recommended 0.4 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Urel. min. 0.224 47 18.00 -18.00 2880 200 Packaging/unit Temperature [C] 0 Terminal Terminal Assignment Assignment All figures are given for coil withoutAmbient pre-energization, at ambient temperature +23C THT version tube/50pcs., box/1000 pcs. -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 SMT versionreel/1000 pcs., box/1000 or 5000 pcs. Ambient Temperature [C] Relay -Relay top view - top view Coil operating range, bistable 1 coil 3.4 Terminal assignment 3.2 TOP view on relay Latching Latching Type, 1 Type, Coil 1 Coil 3 -30 -20 -10 0 10 20 30 40 50 60 70 80 Urel. min. 90 10 0 1 10 12 0 Ambient Temperature [C] W Coil Voltage [U/Unom[U/U ] Coil Voltage nom] 0.2 -40 Non-Latching Non-Latching Type Type Monostable version Bistable version,condition 1 coil condition reset not energized not energized condition condition reset rest condition ] Coil Voltage [U/Unom[U/U Coil Voltage nom] Umax. - 5%coil 3.4 2.8 Umax.-5%coil duty at 3.2 2.6 duty at 0A(100mW) 2x2A (100mW) Umax. - 100% coil duty at 2.43 0A (100mW) Umax. - 5%coil 2.8 2.2 UUmax max.-5%coil .-5%coil duty at 2.62 duty dutyat at0A(100mW) 0A (200mW) 2x2A (100mW) Umax. - 100% coil duty at 2.4 0Acoil (100mW) Umax. - 100% duty at 1.8 0A (200mW) 2.2 U max.-5%coil 1.6 Umax. -5% coil duty at 0A (200mW) duty at 2x1A (100mW) 1.42 Umax. - 100% coil duty at 1.8 1.2 0A (200mW) 1.61 Unom. nominal coil voltage Umax. -5% coil duty at 2x1A (100mW) 1.4 0.8 1.2 Uset min. 0.6 0.41 Unom. nominal coil voltage 100 mW Latching 0.8 0.2 Uset min.200 mW Latching 0.60 0.4 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80100 Latching 90 mW 100 110 120 130 140 0.2 Ambient Temperature [C]200 mW Latching 0 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] 2 reset condition ContactsE Con i positionE pos m portationE por use. use All All specifications subject to change. Consult Tyco Electronics for latest specifications. 04-2011, Rev.All0411 Datasheets and product specifications subject to change. Consult Tyco Electronics forspecification latest specifications. www.te.com according to IEC 61810-1 and to be used (c) 2011 Tyco Electronics Corporation, only together with the `Definitions' section. a TE Connectivity Ltd. company Contacts are shown in reset condition. Contact position might change during transportation and must be reset before specifications All specifications subject tosubject change. to Consult change. Consult Electronics Tyco Electronics for latest for specifications. latest specifi use. Tyco 24 of 28 Datasheets and product data is subject to the 24 of Datasheets, product data, `Definitions' sec28 terms of the disclaimer and all chapters of tion, application notes and all specifications the `Definitions' section, available at are subject to change. http://relays.te.com/definitions 3.2 3.2 0.1250.125 3.2 3.2 0.1250.125 N/A N/A N/A N/A N/A N/A N/A N/A T3.2 3.2 0.125 0.125 3.2 3.2 0.125 0.125 N/A N/A N/A N/A N/A N/A N/A N/A TT LLT110.00EE0.08 LN/A 10.00EE0.08 10.00EE0.08 10.00EE0.08 0.393EE0.003 0.393EE0.003 0.393EE0.003 10.00EE0.08 10.00EE0.08 10.00EE0.08 0.393EE0.003 0.393EE0.003 0.393EE0.003 10.00EE0.08 10.00EE0.08 10.00EE0.08 0.393EE0.003 0.393EE0.003 0.393EE0.003 0.393EE0.003 10.00EE0.08 10.00EE0.08 10.00EE0.08 10.00EE0.08 0.393EE0.003 0.393EE0.003 0.393EE0.003 0.393EE0.003 N/A N/A N/A N/A 7.50EE0.30 0.295EE0.011 2.80EE0.20 0.110EE0.007 N/A 0.393EE0.003 N/A N/A 10.00EE0.08 N/A N/A 0.393EE0.003 N/A N/A 10.00EE0.08 7.50EE0.30 7.50EE0.30 0.295EE0.011 0.295EE0.011 2.80EE0.20 2.80EE0.20 0.110EE0.007 0.110EE0.007 T1 T1 N/A N/A N/A N/A 7.50EE0.30 0.295EE0.011 2.80EE0.20 0.110EE0.007 W W W 6.00EE0.08 6.00EE0.08 0.236EE0.003 0.236EE0.003 0.236EE0.003 0.236EE0.003 5.70EE0.30 5.70EE0.30 5.70EE0.30 5.70EE0.30 0.224EE0.012 0.224EE0.012 0.224EE0.012 0.224EE0.012 EE6.00EE0.08 EE6.00EE0.08 EE6.00EE0.08 EE6.00EE0.08 0.236EE0.003 0.236EE0.003 0.236EE0.003 0.236EE0.003 EE6.00EE0.08 EE6.00EE0.08 EE6.00EE0.08 EE6.00EE0.08 0.236EE0.003 0.236EE0.003 0.236EE0.003 0.236EE0.003 T26.00EE0.08 5.08EE0.10 0.200EE0.004 3.20EE0.10 0.126EE0.004 5.08EE0.10 0.200EE0.004 5.08EE0.10 0.200EE0.004 5.08EE0.10 T2 6.00EE0.08 5.08EE0.10 0.200EE0.004 0.200EE0.004 3.20EE0.10 3.20EE0.10 0.126EE0.004 0.126EE0.004 5.08EE0.10 5.08EE0.10 0.200EE0.004 0.200EE0.004 5.08EE0.10 5.08EE0.10 0.200EE0.004 0.200EE0.004 T2 5.08EE0.10 0.200EE0.004 3.20EE0.10 0.126EE0.004 5.08EE0.10 0.200EE0.004 5.08EE0.10 0.200EE0.004 HH 5.65EE0.20 H 5.65EE0.20 5.65EE0.20 5.65EE0.20 0.222EE0.008 0.222EE0.008 0.222EE0.008 0.222EE0.008 5.80EE0.08 5.80EE0.08 5.80EE0.08 5.80EE0.08 0.230EE0.003 0.230EE0.003 0.230EE0.003 0.230EE0.003 EE5.65EE0.20 EE5.65EE0.20 EE5.65EE0.20 EE5.65EE0.20 0.222EE0.008 0.222EE0.008 0.222EE0.008 0.222EE0.008 EE5.65EE0.02 EE5.65EE0.02 EE5.65EE0.02 EE5.65EE0.02 0.222EE0.008 0.222EE0.008 0.222EE0.008 0.222EE0.008 D13.20EE0.15 3.20EE0.15 0.126EE0.006 3.20EE0.15 0.126EE0.006 3.20EE0.15 0.126EE0.006 3.20EE0.15 0.126EE0.006 D13.20EE0.15 3.20EE0.15 0.126EE0.006 0.126EE0.006 3.20EE0.15 3.20EE0.15 0.126EE0.006 0.126EE0.006 3.20EE0.15 3.20EE0.15 0.126EE0.006 0.126EE0.006 3.20EE0.15 3.20EE0.15 0.126EE0.006 0.126EE0.006 D1 0.126EE0.006 3.20EE0.15 0.126EE0.006 3.20EE0.15 0.126EE0.006 3.20EE0.15 0.126EE0.006 TD2 TD22.20EE0.15 TD2 3.2 3.2 3.2 3.2 0.087EE0.006 0.125 0.125 0.125 0.125 2.20EE0.15 3.2 3.2 3.2 3.2 0.087EE0.006 0.125 0.125 0.125 0.125 2.20EE0.15 N/A N/A N/A N/A 0.087EE0.006 N/A N/A N/A N/A 2.20EE0.15 N/A N/A N/A N/A 0.087EE0.006 N/A N/A N/A N/A 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 2.20EE0.15 0.087EE0.006 T1 T1 N/A 0.40 N/A N/A 0.40 N/A N/A 0.015 N/A N/A 0.015 N/A N/A N/A N/A 0.015 N/A N/A 0.015 N/A 7.50EE0.30 7.50EE0.30 7.50EE0.30 7.50EE0.30 0.295EE0.011 0.295EE0.011 0.295EE0.011 2.80EE0.20 2.80EE0.20 2.80EE0.20 0.110EE0.007 0.110EE0.007 0.110EE0.007 Tw T1 0.40 0.015 0.4 N/A 0.015 0.4 0.015 0.4 0.015 Tw 0.40 0.015 0.4 N/A 0.4 0.015 0.4 0.4 0.295EE0.011 0.015 0.015 2.80EE0.20 0.4 0.4 0.110EE0.007 0.015 0.015 Tw 0.4 0.4 0.015 0.4 0.015 T2 T2 5.08EE0.10 5.08EE0.10 5.08EE0.10 0.200EE0.004 0.200EE0.004 0.200EE0.004 3.20EE0.10 3.20EE0.10 3.20EE0.10 0.126EE0.004 0.126EE0.004 0.126EE0.004 0.126EE0.004 5.08EE0.10 5.08EE0.10 5.08EE0.10 5.08EE0.10 0.200EE0.004 0.200EE0.004 0.200EE0.004 5.08EE0.10 5.08EE0.10 5.08EE0.10 0.200EE0.004 0.200EE0.004 0.200EE0.004 S 5.08EE0.10 0.75 0.029 0.30EE0.05 0.011EE0.002 N/A N/A N/A N/A S0.75 0.75 0.200EE0.004 0.029 0.029 3.20EE0.10 0.30EE0.05 0.30EE0.05 0.011EE0.002 0.011EE0.002 N/A N/A 0.200EE0.004 N/A N/A 5.08EE0.10 N/A N/A 0.200EE0.004 N/A N/A ST2 0.75 0.029 0.30EE0.05 0.011EE0.002 N/A N/A N/A N/A D1 D13.20EE0.15 D13.20EE0.15 3.20EE0.15 3.20EE0.15 0.126EE0.006 0.126EE0.006 0.126EE0.006 0.126EE0.006 3.20EE0.15 3.20EE0.15 3.20EE0.15 3.20EE0.15 0.126EE0.006 0.126EE0.006 0.126EE0.006 0.126EE0.006 3.20EE0.15 3.20EE0.15 3.20EE0.15 3.20EE0.15 0.126EE0.006 0.126EE0.006 0.126EE0.006 0.126EE0.006 3.20EE0.15 3.20EE0.15 3.20EE0.15 3.20EE0.15 0.126EE0.006 0.126EE0.006 0.126EE0.006 0.126EE0.006 D2 D22.20EE0.15 D22.20EE0.15 2.20EE0.15 2.20EE0.15 0.087EE0.006 0.087EE0.006 0.087EE0.006 0.087EE0.006 2.20EE0.15 2.20EE0.15 2.20EE0.15 2.20EE0.15 0.087EE0.006 0.087EE0.006 0.087EE0.006 0.087EE0.006 2.20EE0.15 2.20EE0.15 2.20EE0.15 2.20EE0.15 0.087EE0.006 0.087EE0.006 0.087EE0.006 0.087EE0.006 2.20EE0.15 2.20EE0.15 2.20EE0.15 2.20EE0.15 0.087EE0.006 0.087EE0.006 0.087EE0.006 0.087EE0.006 Tw Tw Tw 0.40 0.40 0.40 0.40 0.015 0.015 0.0150.015 0.4 0.4 0.4 0.4 0.015 0.015 0.0150.015 0.4 0.4 0.4 0.4 0.015 0.015 0.0150.015 0.4 0.4 0.4 0.4 0.015 0.015 0.0150.015 SS S0.75 0.75 0.75 0.75 0.029 0.029 0.0290.029 0.30EE0.05 0.30EE0.05 0.30EE0.05 0.30EE0.05 0.011EE0.002 0.011EE0.002 0.011EE0.002 0.011EE0.002 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Signal Relays Version SMTSMT Version SMT Version IM Relay (Continued) View onto the component component side of PCB the PCB (top view) ViewView onto View theonto component the component sideside of the side of PCB the (top PCB view) (top view) onto the of the (top view) Mounting Mounting Mounting Mounting Hole Hole Hole Layout Hole Layout Layout Layout PCB layout Narrow Version Narrow Narrow Version Version Standard Version Standard Standard Version Version TOP view on component side of PCB Narrow Version Version ViewStandard View View onto View onto onto theonto component the the component the component component sideside side of the side of of PCB the the of PCB the PCB (top PCB (top (top view) (top view) view) view) Standard version Narrow version Narrow Narrow Narrow Narrow Version Version Version Version AXICOMESignalERelays 5.65-0.2 5.65-0.2 5.65-0.2 5.65-0.2 5.65-0.2 5.65-0.2 5.65-0.2 5.65-0.2 5.65-0.2 5.65-0.2 2.20.15 2.20.15 5.65-0.2 2.20.15 3.20.15 3.20.15 2.20.15 2.20.15 2.20.15 3.20.15 2.20.15 2.20.15 2.20.15 5.65-0.2 5.65-0.2 Coplanarity 0.1mm Coplanarity 0.1mm Coplanarity 0.1mm Coplanarity 0.1mm 5.080.1 5.080.1 5.080.1 5.080.1 3.20.15 0.4 Coplanarity 0.1mm Coplanarity 0.1mm Coplanarity 0.1mm 0.4 0.4 0.4 0.4 Coplanarity 0.1mm Coplanarity Coplanarity 0.1mm 0.1mm Coplanarity Coplanarity 0.1mm 0.1mm Solder Pad Layout 240C Solder Pad Solder Layout Pad Layout Solder Pad Layout Coplanarity Coplanarity Coplanarity 0.1mm 0.1mm 0.1mm Coplanarity Coplanarity 0.1mm Coplanarity Coplanarity 0.1mm 0.1mm Coplanarity 0.1mm 0.1mm View onto the component side of the PCB (top view) ViewView onto View the onto component the component side of the side PCB of the (top PCB view) (top view) onto the component side of the PCBtypical (top view) Full line: 20-40sec 180C Dottedline: processlimits Solder Solder Solder Pad Solder Pad Pad Layout Pad Layout Layout Layout 240C Gull Wings GullGull Wings Gull Wings Wings 130C forced ViewView View onto View onto onto theonto component the the component the component component sideside side of the side of of PCB the the of PCB the PCB (top PCB (top (top view) (top view) view) view) Gull wings 100C 180C J-legs GullGull Gull Wings Gull Wings Wings Wings 130C cooling forced cooling 100C 108-98001 Rev. M Time (s) Terminal Assignment Terminal Terminal Assignment Assignment Terminal Assignment Processing Soldering conditions according IEC 60058-2-58 and soldering conditions Relay top view Relay -Recommended Relay top-- view - top view IPC/JEDEC J-STD-020B Relay top view Soldering conditions according IEC 60058-2-58 and Terminal Terminal Terminal Terminal Assignment Assignment Assignment Assignment Latching Type, Coil IPC/JEDEC J-STD-020B Latching Latching Type, 1 Coil Type, 1 Coil Non-Latching Type Non-Latching Non-Latching Type Type Latching Type, 11 Coil Non-Latching Type Relay Relay Relay - Relay top-- view top top - top view viewview Full line: typical 20-40sec reset condition condition reset condition not not energized condition Dottedline: processlimits not energized energized condition condition resetreset condition not energized condition 240C Latching Latching Latching Latching Type, Type, Type, 1 Coil Type, 11 Coil Coil 1 Coil reset condition reset condition condition condition not energized not not not energized energized energized condition condition condition condition resetreset 180C 130C forced cooling Time (s) Recommended Reflow Soldering Profile Recommended Reflow Soldering Profile Recommended reflow soldering profile Temperature C Temperature C Recommended Soldering Conditions Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Vap (Lea Vapo (Lead Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Emin.E0.75 Temperature C 0.4 2.80.2 2.80.2 2.80.2 Coplanarity 0.1mm Coplanarity Coplanarity 0.1mm 7.50.3 0.1mm Coplanarity 0.1mm Coplanarity Coplanarity 0.1mm 2.80.2 0.1mm 7.50.3 7.50.3 7.50.3 Coplanarity 0.1mm and 0.1mm Soldering conditions according IEC Coplanarity 60058-2-585.080.1 5.080.1 5.080.1 5.080.1 Full line: typical 20-40sec IPC/JEDEC J-STD-020B Coplanarity Coplanarity Coplanarity 0.1mm Coplanarity 0.1mm 0.1mm 0.1mm Dottedline: processlimits IM Relay Non-Latching Non-Latching Non-Latching Non-Latching TypeType Type Type 0.4 0.4 2.20.15 3.20.15 2.20.15 2.20.15 3.20.15 2.20.15 2.20.15 3.20.13.20.1 3.20.1 3.20.1 0.4 0.4 5.65-0.2 0.30.05 0.30.05 0.30.05 0.4 0.4 0.4 2.80.2 2.80.2 Soldering conditions according IEC 60058-2-58 and2.80.22.80.2 5.080.1 5.080.1 5.080.1 5.080.1 IPC/JEDEC J-STD-020B Recommended Soldering Conditions 0.4 3.20.1 3.20.13.20.1 3.20.1 0.4 0.4 10.00.08 10.00.08 10.00.08 10.00.08 0.4 0.4 5.080.1 5.080.1 5.080.1 0.4 5.080.1 7.50.3 7.50.37.50.3 7.50.3 2.20.15 0.4 0.4 0.30.05 0.4 0.4 0.4 6.00.08 10.00.08 6.00.08 6.00.08 10.00.08 10.00.08 AXICOMESignalERelays 6.00.08 10.00.08 Gull wings J-legs IMConditions Relay Recommended Soldering 6.00.08 6.00.08 6.00.08 6.00.08 10.00.08 10.00.08 10.00.08 10.00.08 6.00.08 6.00.08 6.00.08 6.00.08 2.20.15 Mounting Hole Layout Mounting Mounting HoleHole Layout Hole Layout Mounting Layout Standard Standard Standard Standard Version Version Version Version IMJ-Legs Relay J-Legs J-Legs J-Legs AXICOMESignalERelays 6.00.08 10.00.08 6.00.08 6.00.08 10.00.08 10.00.08 SMT version 6.00.08 10.00.08 5.70.35.70.3 5.70.3 5.70.3 10.00.08 10.00.08 10.00.08 10.00.08 0.30.05 2.20.15 0.4 5.080.1 5.080.1 5.080.1 5.080.1 Narrow version 2.20.15 0.4 0.4 3.2 5.080.1 5.080.1 5.080.1 5.080.1 3.2 3.2 5.80.08 5.80.08 2.20.15 3.20.15 3.20.15 2.20.15 2.20.15 2.20.15 3.20.15 0.30.05 0.30.05 2.20.15 2.20.15 2.20.15 0.4 2.20.15 3.20.15 2.20.15 2.20.15 3.20.15 2.20.15 2.20.15 3.2 5.80.08 0.75 0.4 0.4 2.20.15 0.4 2.20.15 0.75 6.00.08 6.00.08 6.00.08 6.00.08 10.00.08 10.00.08 10.00.08 10.00.08 3.2 5.80.08 3.2 3.2 5.80.08 5.80.08 3.20.15 0.75 0.75 0.75 0.75 Standard version 3.20.15 5.80.08 3.2 5.65-0.2 3.2 2.20.15 3.20.15 3.20.15 2.20.15 2.20.15 2.20.15 3.20.15 2.20.15 2.20.15 0.75 2.20.15 2.20.15 3.20.15 2.20.15 2.20.15 3.20.15 2.20.15 2.20.15 5.65-0.2 3.2 5.65-0.2 3.2 3.2 5.65-0.2 5.65-0.2 3.20.15 3.20.15 3.2 3.2 5.65-0.2 5.65-0.2 THT10.00.08 version 6.00.08 10.00.08 6.00.08 6.00.08 10.00.08 10.00.08 6.00.08 0.4 GullGull Gull Wings Gull Wings Wings Wings 5.70.3 10.00.08 5.70.35.70.3 5.70.3 10.00.08 10.00.08 10.00.08 2.20.15 3.20.15 3.20.15 2.20.15 2.20.15 2.20.15 3.20.15 2.20.15 2.20.15 2.20.15 Narrow Narrow Narrow Narrow Version Version Version Version J-Legs J-Legs J-Legs J-Legs 3.20.15 Dimensions Standard Standard Standard Standard Version Version Version Version Gull Wings GullGull Wings Gull Wings Wings SMT SMT Version SMT Version Version 2.20.15 3.20.15 2.20.15 2.20.15 3.20.15 2.20.15 2.20.15 Narrow Version Narrow Narrow Version Version Narrow Version THTTHT Version THT Version Version 3.20.15 Standard Version Standard Standard Version Version Standard Version 3.20.15 Version THTTHT Version THT Version AXICOM Temperature C Temperature C T LT1 W T2 H D1 TD2 T1 Tw T2 S D1 D2 Tw S ContactsE inE resetE resetE position.E ContactE Infra ContactsE ContactsE inE resetE inEposition.E resetE position.E ContactE ContactE ContactsE inE position.E ContactE Time (s)-trans positionE mightE changeE duringE (Lea positionE positionE mightE changeE mightE changeE duringE trans duringE trans positionE mightE changeE duringE trans Vapor Phase Soldering: portationE andE mustE beEbeE resetE beforeE temperature/time profile (lead portationE portationE andEandE mustE andE beE mustE resetE beforeE resetE beforeE portationE mustE beE resetE beforeE and housing peak temperature) ContactsE ContactsE inE resetE inE inE resetE resetE inEposition.E resetE position.E position.E position.E ContactE ContactE ContactE ContactE use.ContactsE use. ContactsE use. Infrar use. Vapor Phase Soldering: Temperature/Time positionE positionE positionE positionE mightE mightE mightE changeE mightE changeE changeE changeE duringE duringE duringE trans duringE trans trans trans -- -Profile Profile Time (s) Resistance to Soldering Heat - Reflow (Lead Infrared Soldering: temperature/ (Lead and Housing Peak Temperature) portationE portationE portationE andE andE andE mustE andE mustE mustE beE mustE resetE beE beEbeE resetE resetE beforeE resetE beforeE beforeE beforeE time profile (lead 5 andof housing All specifications specifications subject to change. change. Consult TycoTyco Electronics for latest specifications. 528of of528 28 All specifications All specifications subject tosubject change. toConsult change. Tyco Consult Electronics Electronics for latest specifications. forportationE latest specifications. of 28 All subject to Consult 5 Time (s) Tyco Electronics for latest specifications. peak temperature) use. use. use.Resistance use. to soldering heat - Reflow profile 100C Resistance to Soldering Heat - Reflow Profile All specifications All All specifications specifications All specifications subject subject subject tosubject change. to to change. change. toConsult change. Consult Consult Tyco Consult Tyco Electronics TycoTyco Electronics Electronics Electronics for latest for for latest latest specifications. for latest specifications. specifications. specifications. 5 of 5528of of528 28 of 28 Temperature C Temperature C Temperature C Recommended Reflow Soldering Profile 04-2011, Rev. 0411 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Time (s) Time (s) Datasheets and product data is subject to the Datasheets, product data, `Definitions' secterms of the disclaimer and all chapters of tion, application notes and all specifications the `Definitions' section, available at Time (s) are subject to change. http://relays.te.com/definitions Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) 3 Infra (Lea Infrar (Lead Signal Relays AXICOM AXICOMESignalERelays IM Relay (Continued) Tub 50 r 1,00 108-98001 Rev. M IM Relay Packing Tape and reel for SMT version 1000 relays per reel, 1000 or 5000 relays Dimensions in per mmbox Packing Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box Tube for THT version 50 relays per tube, 1000 relays per box Reel Dimension Tap 1,00 1,00 Reel Dimension Tube for THT version 50 relays per tube Reel dimensions 1,000 relays per box Reel Dimension All specifications subject to change. Consult Tyco Electronics for latest specifications. All specifications subject to change. Consult Tyco Electronics for latest specifications. Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box Product code structure Typical product code IM 03 G R All specifications subject to change. Consult Tyco Electronics for latest specifications. Type IM Signal Relays IM Series Contact arrangement Reel Dimension Blank 2 form C, 2 CO Coil Coil code: please refer to coil versions table Performance type Blank Standard version Terminals T THT - standard N THT - narrow version Packing S Tube C D P High dielectric version High current version High contact stability version J G SMT - J-leg SMT - gull wing R Reel 26 of 28 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4 04-2011, Rev. 0411 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. Signal Relays AXICOM IM Relay (Continued) Product code Arrangement Perf. type Coil Coil type Coil Terminals IM00GR 2 form C, Standard 1.5VDC Monostable Standard SMT gull wing IM00JR 2 CO SMT J-leg IM00NS contacts THT narrow IM01GR 3VDC SMT gull wing IM01JR SMT J-leg IM01NS THT narrow IM01TS THT standard IM02GR 4.5VDC SMT gull wing IM02JR SMT J-leg IM02NS THT narrow IM03GR 5VDC SMT gull wing IM03JR SMT J-leg IM03NS THT narrow IM03TS THT standard IM04GR 6VDC SMT gull wing IM04JR SMT J-leg IM04NS THT narrow IM05GR 9VDC SMT gull wing IM05JR SMT J-leg IM05NS THT narrow IM05TS THT standard IM06GR 12VDC SMT gull wing IM06JR SMT J-leg IM06NS THT narrow IM07GR 24VDC SMT gull wing IM07JR SMT J-leg IM07NS THT narrow IM08GR 2.4VDC SMT gull wing IM11GR 3VDC High sens. IM12GR 4.5VDC IM13GR 5VDC IM16GR 12VDC IM17GR 24VDC IM17TS THT standard IM21GR 3VDC Ultra SMT gull wing IM21TS high THT standard IM22GR 4.5VDC sensitive SMT gull wing IM22TS THT standard IM23GR 5VDC SMT gull wing IM23TS THT standard IM25GR 9VDC SMT gull wing IM25TS THT standard IM26GR 12VDC SMT gull wing IM26TS THT standard IM40GR 1.5VDC Bistable Standard SMT gull wing IM40JR SMT J-leg IM40NS THT narrow IM40TS THT standard IM41GR 3VDC SMT gull wing IM41JR SMT J-leg IM41NS THT narrow IM41TS THT standard IM42GR 4.5VDC SMT gull wing IM42JR SMT J-leg IM42NS THT narrow IM42TS THT standard IM43GR 5VDC SMT gull wing IM43JR SMT J-leg IM43NS THT narrow IM43TS THT standard IM44GR 6VDC SMT gull wing IM44JR SMT J-leg IM44NS THT narrow IM44TS THT standard IM45GR 9VDC SMT gull wing IM45JR SMT J-leg IM45NS THT narrow IM46GR 12VDC SMT gull wing IM46JR SMT J-leg IM46NS THT narrow IM46TS THT standard IM47GR 24VDC SMT gull wing IM47JR SMT J-leg IM47NS THT narrow IM47TS THT standard IM48GR 2.4VDC SMT gull wing 04-2011, Rev. 0411 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Part number 3-1462037-7 3-1462037-9 1-1462038-0 1462037-1 4-1462037-0 1-1462038-1 1462037-4 1462037-9 1-1462037-1 1-1462038-2 1-1462037-4 1-1462037-6 1-1462038-3 1-1462037-8 4-1462037-2 4-1462037-4 1-1462038-4 3-1462037-4 4-1462037-5 1-1462038-5 2-1462037-2 2-1462037-3 4-1462037-6 1-1462038-6 4-1462037-7 4-1462037-8 1-1462038-7 6-1462039-3 9-1462038-5 1462039-3 1462039-4 1462039-5 1462039-6 4-1462039-6 2-1462039-6 1-1462039-5 2-1462039-7 2-1462039-8 2-1462039-9 3-1462039-0 3-1462039-5 3-1462039-6 3-1462039-1 3-1462039-2 5-1462037-1 5-1462037-2 1-1462038-8 5-1462037-0 5-1462037-4 5-1462037-5 1-1462038-9 5-1462037-3 3-1462037-1 5-1462037-7 2-1462038-0 5-1462037-6 5-1462037-9 6-1462037-0 2-1462038-1 5-1462037-8 6-1462037-2 6-1462037-3 2-1462038-2 6-1462037-1 6-1462037-4 6-1462037-5 2-1462038-3 6-1462037-7 6-1462037-8 2-1462038-4 6-1462037-6 7-1462037-0 7-1462037-1 2-1462038-5 6-1462037-9 1462039-8 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 5 Signal Relays AXICOM IM Relay (Continued) Product codeArrangement Perf. type Coil Coil type Coil Terminals IM01CGR 2 form C High 3VDC Monostable Standard SMT gull wing IM01CTS 2 CO dielectric THT standard IM02CGR contacts 4.5VDC SMT gull wing IM03CGR 5VDC SMT gull wing IM03CJR SMT J-leg IM03CTS THT standard IM05CGR 9VDC SMT gull wing IM06CGR 12VDC SMT gull wing IM06CJR SMT J-leg IM06CTS THT standard IM07CGR 24VDC SMT gull wing IM07CTS THT standard IM17CGR High sens. SMT gull wing IM41CGR 3VDC Bistable Standard IM42CGR 4.5VDC IM43CGR 5VDC IM02DGR High 4.5VDC Monostable Standard IM03DGR current 5VDC IM03DJR SMT J-leg IM05DGR 9VDC SMT gull wing IM06DGR 12VDC IM06DJR SMT J-leg IM06DTS THT standard IM07DGR 24VDC SMT gull wing IM07DJR SMT J-leg IM07DTS THT standard IM22DTS 4.5VDC U.h.sens. IM41DGR 3VDC Bistable Standard SMT gull wing IM42DGR 4.5VDC IM42DNS THT narrow IM46DNS 12VDC IM47DJR 24VDC SMT J-leg IM48DGR 2.4VDC SMT gull wing IM49DGR 2VDC IM02PGR High 4.5VDC Monostable Standard IM02PNS contact THT narrow IM03PGR stability 5VDC SMT gull wing IM03PJR SMT J-leg IM03PNS THT narrow IM06PGR 12VDC SMT gull wing IM06PNS THT narrow IM42PGR 4.5VDC Bistable Standard SMT gull wing IM42PNS THT narrow IM43PGR SMT gull wing IM46PNS 12VDC THT narrow 6 04-2011, Rev. 0411 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Part number 1462038-4 9-1462038-6 1462038-1 1462038-2 4-1462039-8 4-1462039-7 1462038-3 9-1462037-9 3-1462039-4 4-1462037-9 1462039-2 1462039-1 1462039-7 4-1462039-2 4-1462039-1 9-1462038-7 9-1462038-8 9-1462038-9 3-1462039-3 1-1462039-7 1-1462039-8 7-1462039-0 3-1462039-8 3-1462039-7 7-1462039-4 7-1462039-2 7-1462039-6 6-1462039-8 1-1462039-9 1-1462039-6 1-1462039-2 7-1462039-5 1462039-9 2-1462039-2 5-1462039-4 5-1462039-8 5-1462039-5 6-1462039-6 5-1462039-9 5-1462039-6 6-1462039-0 5-1462039-7 7-1462039-8 7-1462039-3 6-1462039-1 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change.