BZX55C2V4 - BZX55C56 Zener Diodes Tolerance = 5% DO-35 Glass case COLOR BAND DENOTES CATHODE Absolute Maximum Ratings * Symbol PD Ta = 25C unless otherwise noted Parameter Power Dissipation @ TL 75C, Lead Length = 3/8" Derate above 75C TJ, TSTG Operating and Storage Temperature Range Value Units 500 mW 4.0 mW/C -65 to +200 C * These ratings are limiting values above which the serviceability of the diode may be impaired. Electrical Characteristics VZ (V) @ IZ Ta = 25C unless otherwise noted Min. Max. BZX55C2V4 BZX55C2V7 BZX55C3V0 BZX55C3V3 BZX55C3V6 2.28 2.50 2.8 3.1 3.4 2.56 2.9 3.2 3.5 3.8 85 85 85 85 85 5 5 5 5 5 50 10 4 2 2 BZX55C3V9 BZX55C4V3 BZX55C4V7 BZX55C5V1 BZX55C5V6 3.7 4.0 4.4 4.8 5.2 4.1 4.6 5.0 5.4 6.0 85 75 60 35 25 5 5 5 5 5 BZX55C6V2 BZX55C6V8 BZX55C7V5 BZX55C8V2 BZX55C9V1 5.8 6.4 7.0 7.7 8.5 6.6 7.2 7.9 8.7 9.6 10 8 7 7 10 BZX55C10 BZX55C11 BZX55C12 BZX55C13 BZX55C15 9.5 10.4 11.4 12.4 13.8 10.6 11.6 12.7 14.1 15.6 15 20 20 26 30 (Note 1) (c)2007 Fairchild Semiconductor Corporation BZX55C2V4 - BZX55C56 Rev. D1 Test Current IZ (mA) IR (A) @ VR ZZ @ IZ () Device IZM (mA) VR (V) (Note 2) 100 50 40 40 40 1 1 1 1 1 155 135 125 115 105 2 1 0.5 0.1 0.1 40 40 10 2 2 1 1 1 1 1 95 90 85 80 70 5 5 5 5 5 0.1 0.1 0.1 0.1 0.1 2 2 2 2 2 2 3 5 6 7 64 58 53 47 43 5 5 5 5 5 0.1 0.1 0.1 0.1 0.1 2 2 2 2 2 7.5 8.5 9 10 11 40 36 32 29 27 1 Ta = 25C Ta = 125C www.fairchildsemi.com BZX55C2V4 - BZX55C56 Zener Diodes June 2007 15.3 16.8 18.8 20.8 22.8 17.1 19.1 21.1 23.3 25.6 40 50 55 55 80 5 5 5 5 5 0.1 0.1 0.1 0.1 0.1 2 2 2 2 2 12 14 15 17 18 24 21 20 18 16 BZX55C27 BZX55C30 BZX55C33 BZX55C36 BZX55C39 25.1 28.0 31.0 34.0 37.0 28.9 32.0 35.0 38.0 41.0 80 80 80 80 90 5 5 5 5 2.5 0.1 0.1 0.1 0.1 0.1 2 2 2 2 5 20 22 24 27 28 14 13 12 11 10 BZX55C43 BZX55C47 BZX55C51 BZX55C56 40 44 48 52 46 50 54 60 90 110 125 135 2.5 2.5 2.5 2.5 0.1 0.1 0.1 0.1 5 5 10 10 32 35 38 42 9.2 8.5 7.8 7.0 VF Forward Voltage = 1.3V Max. @ IF = 100mA Notes: 1. Zener Voltage (VZ) The zener voltage is measured with the device junction in the thermal equilibrium at the lead temperature (TL) at 30C 1C and 3/8" lead length. 2. Maximum Zener Current Ratings (IZM) The maximum current handling capability on a worst case basis is limited by the actual zener voltage at the operation point and the power derating curve. Top Mark Information Device Line 1 Line 2 Line 3 BZX55C2V4 BZX55C2V7 BZX55C3V0 BZX55C3V3 BZX55C3V6 LOGO LOGO LOGO LOGO LOGO 5C 5C 5C 5C 5C 2V4 2V7 3V0 3V3 3V6 BZX55C3V9 BZX55C4V3 BZX55C4V7 BZX55C5V1 BZX55C5V6 LOGO LOGO LOGO LOGO LOGO 5C 5C 5C 5C 5C 3V9 4V3 4V7 5V1 5V6 BZX55C6V2 BZX55C6V8 BZX55C7V5 BZX55C8V2 BZX55C9V1 LOGO LOGO LOGO LOGO LOGO 5C 5C 5C 5C 5C 6V2 6V8 7V5 8V2 9V1 BZX55C10 BZX55C11 BZX55C12 BZX55C13 BZX55C15 LOGO LOGO LOGO LOGO LOGO 5C 5C 5C 5C 5C 10 11 12 13 15 BZX55C16 BZX55C18 BZX55C20 BZX55C22 BZX55C24 LOGO LOGO LOGO LOGO LOGO 5C 5C 5C 5C 5C 16 18 20 22 24 BZX55C27 BZX55C30 BZX55C33 BZX55C36 BZX55C39 LOGO LOGO LOGO LOGO LOGO 5C 5C 5C 5C 5C 27 30 33 36 39 BZX55C43 BZX55C47 BZX55C51 BZX55C56 LOGO LOGO LOGO LOGO 5C 5C 5C 5C 43 47 51 56 2 BZX55C2V4 - BZX55C56 Rev. D1 www.fairchildsemi.com BZX55C2V4 - BZX55C56 Zener Diodes BZX55C16 BZX55C18 BZX55C20 BZX55C22 BZX55C24 1st line: F - Fairchild Logo F 2nd line: Device Name - 4th to 5th characters of the device name. or 5th to 6th characters for BZXyy series 522 3rd line: Device Name - 6th to 7th characters of the device name. or Voltage rating for BZXyy series 9B XY General Requirements: 1.0 Cathode Band 2.0 First Line: F - Fairchild Logo 3.0 Second Line: Device name - For 1Nxx series: 4th to 5th characters of the device name. For BZxx series: 5th to 6th characters of the device name. 4.0 Third Line: Device name - For 1Nxx series: 6th to 7th characters of the device name. For BZXyy series: Voltage rating 5.0 Devices shall be marked as required in the device specification (PID or FSC Test Spec). 6.0 Maximum no. of marking lines: 3 7.0 Maximum no. of digits per line: 2 8.0 FSC logo must be 20 % taller than the alphanumeric marking and should occupy the 2 characters of the specified line. 9.0 Marking Font: Arial (Except FSC Logo) 10.0 First character of each marking line must be aligned vertically. 11.0 All device markings must be based on Fairchild device specification. 3 BZX55C2V4 - BZX55C56 Rev. D1 www.fairchildsemi.com BZX55C2V4 - BZX55C56 Zener Diodes Top Mark Information (Continued) The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM Across the board. Around the world.TM ActiveArrayTM BottomlessTM Build it NowTM CoolFETTM CROSSVOLTTM CTLTM Current Transfer LogicTM DOMETM E2CMOSTM EcoSPARK(R) EnSignaTM FACT Quiet SeriesTM FACT(R) FAST(R) FASTrTM FPSTM FRFETTM GlobalOptoisolatorTM PowerSaverTM PowerTrench(R) Programmable Active DroopTM QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM ScalarPumpTM SMART STARTTM SPMTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TCMTM The Power Franchise(R) TinyBoostTM GTOTM HiSeCTM i-LoTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM MICROCOUPLERTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM(R) PACMANTM POPTM Power220(R) Power247(R) PowerEdgeTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyWireTM TruTranslationTM SerDesTM UHC(R) UniFETTM VCXTM WireTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only. Rev. I23 4 BZX55C2V4 - BZX55C56 Rev. D1 www.fairchildsemi.com BZX55C2V4 - BZX55C56 Zener Diodes TRADEMARKS