Resin Dipped, Solid Tantalum Capacitors NDTM Series FEATURES * FLUIDIZED BED PROCESS * NEW REDUCED SIZES * FLAME RETARDANT COATING * LOW LEAKAGE CURRENT AND IMPEDANCE * EXCEPTIONAL TEMPERATURE STABILITY SPECIFICATIONS Capacitance Range: 0.1F ~ 330F Capacitance Tolerance: + 20% (M), + 10% (K) Rated Voltage (VDC): 6.3 10 16 20 25 35 50 Surge Voltage (VDC): 8 13 20 26 36 46 65 Temperature Range: -55C ~ +85C (+125C with Derating) Tan Capacitance Range Less than 4% 0.1 ~ 1.5F Less than 6% 2.2 ~ 6.8F Less than 8% 10 ~ 68F Less than 10% 100 ~ 330F 1% per 1000 hrs. at 85C with 0.1/V series impedance, 60% confidence leve Dissipation Factor: (120hz, +25oC) Tan Reliability: DERATED VOLTAGE AND SURGE VOLTAGE 16 35 50 16 23 33 33 46 65 28 40 25 20 Rated Voltage (VDC) +85oC: 6.3 10 Derated Voltage (VDC) +125 C: 4 6.3 10 13 Surge Voltage (VDC) +85oC: 8 13 20 26 Derated Surge Voltage (VDC) +125oC: 5 9 12 16 21 o (R) 134 NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com Resin Dipped, Solid Tantalum Capacitors NDTM Series OUTLINE DRAWINGS AND DIMENSIONS DIMENSIONS (mm) MARKING: (Note: represents decimal point for values below 1F) Front Rear L16 K +33 STANDARD PRODUCTS AND CASE SIZE TABLE D X H (mm) FIG. 1 D H + 2(0.08) max. L S 2.0mm min. d FIG. 2 D H + L PART NUMBERING SYSTEM NDTM 106 K 16 F1 TR S Tape and Reel (optional) Special Lead Forming Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in pF, first 2 digits are significant, third digit is no. of zeros 2.0mm min. d Series (R) NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com 135 Resin Dipped Solid Tantalum Capacitors Taping Specifications TAPING DIMENSIONS (mm) F2TR, F2TB (UNDER 8.0mm DIAMETER) 5.0mm lead spacing. p2 p h Code 12.70.3 P1 5.501.0 P2 6.350.4 P 1.0 d L H1 S W h 0.50.05 F2TR,F2TB=5.0 F1TR,F1TB=2.5 2.0 d H W2 H3 D 4.00.2 W 18............ W1 6.0 min. W2 1.0 max. 160.5 191.0 9.00.5 W1 S R P D T F2TR, F2TB (8.0mm AND OVER) 5.0mm lead spacing. p2 p + 1.0 - 0.5 h H W2 H d H1 H3 L H1 W1 W S D R P T F1TR, F1TB 2.5mm lead spacing. p2 p H d h L H1 W S D T REEL DIMENSIONS (mm) Diameter 30 max. L 11.0 max. T 0.70.2 Parts with diameters up to 9.0mm are available packaged on tape. Larger diameter parts are bulk only. Case Size Reel Ammo 4.5x7.0 1000-1500 3000 4.5x7.5 1000-1250 3000 5.0x8.5 1000-1250 3000 5.0x9.0 1000-1250 3000 5.5x9.0 1000 2500 6.0x10.0 1000 2500 6.5x10.0 750 2500 7.0x10.5 750 2000 8.0x13.0 750 ----------------- 8.5x14.0 500 ----------------- 9.0x14.0 500 ----------------- 9.0x14.5 500 ----------------- 136 32.25 53 max. (R) 18.0 H3 PACKAGING QUANTITIES W1 R P 45 max. 40 min. H2 W2 H3 Dimensions P NIC COMPONENTS 360 max. www.niccomp.com www.lowESR.com www.RFpassives.com