The world's first 0.8 mm pitch wire-to-board
insulation displacement connector.
Side entry type is only 3.9 mm depth and
1.75 mm height after mounting on the PC
board, and top entry type is only 2.2 mm
depth and 3.9 mm height.
Compared to the conventional 1.0 mm pitch
SSR connector, occupation space on the
board is reduced by 34% (side entry type).
Specifications –––––––––––––––––––
• Current rating: 0.5 A AC, DC (AWG #32)
0.2 A AC, DC (AWG #36)
• Voltage rating: 30 V DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 20 mΩmax.
After environmental tests / 40 mΩmax.
• Insulation resistance: 100 MΩmin.
• Withstanding voltage: 200 VAC/minute
• Applicable wire: Conductor size/ AWG #32, #36
Conductor/ 7 strands,
tin-coated copper alloy
Insulation O.D./ 0.39 mm
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
*Compliant with RoHS.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative:
±
0.05 mm for all centers.
3. Dimensions above should serve as a guideline. Contact JST for details.
Top entry type Side entry type
PC board layout and Assembly layout