44015RC Precision Epoxy NTC Thermistor * * * * * * * * 1 Meg-ohm ohm Resistance @ 25C Interchangeable 0.2C, 0C to 70C, Pressed Disk Ceramic Sensor High sensitivity Thermally conductive epoxy coating 0.095 (2.4 mm) Maximum Diameter 32 AWG, 3 (7.6 cm) long Silver plated copper leads RoHS Compliant DESCRIPTION Epoxy Encapsulated Precision Interchangeable NTC Thermistor utilizing high stability pressed-disk ceramic sensor for general applications. FEATURES APPLICATIONS * * * 1 Meg-ohm Ohm Resistance @ 25C Interchangeability Good Long Term Stability * High Sensitivity * * * * * * Thermally Conductive Epoxy Coating RoHS Compliance * * High-range Temperature Applications Tight Tolerance Instrumentation General Applications Requiring Stability Applications Requiring Sensing Small Changes in Temperature Non-condensing Moisture Environments Allows use in Applications World-wide PERFORMANCE SPECS Parameter Units Resistance @ 25C Ohms tolerance 0C to 70C C Beta Value 25/85 K Tolerance on Beta Value % Time response in air Seconds Dissipation Constant in air mW/C Insulation Resistance (Min. of 100Mohms for 1 Sec.) Model Number 44015 Rev B www.meas-spec.com 1/3 Volts Value 1,000,000 0.2 4803 0.8 < 10 1 500 5 June 2010 44014RC Precision Epoxy NTC Thermistor MECHANICAL DETAILS RESISTANCE V TEMPERATURE TABLE Temp C K Temp C K Temp C K Temp C K Temp C K 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 3966 3740 3529 3330 3144 2969 2804 2649 2504 2367 2238 2117 2003 1896 1795 1700 1610 1525 1446 1370 1299 1232 1169 1110 1053 1000 949.7 902.2 857.2 814.7 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 774.5 736.5 700.5 666.4 634.1 603.6 574.6 547.2 521.2 496.6 473.2 451 430 410 391.1 373.1 356.1 339.8 324.4 309.8 295.9 282.7 270.1 258.1 246.7 235.9 225.6 215.8 206.4 197.5 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 189.1 181 173.3 166 159 152.3 146 139.9 134.1 128.6 123.3 118.3 113.5 108.9 104.5 100.3 96.31 92.48 88.82 85.32 81.98 78.78 75.71 72.78 69.98 67.29 64.72 62.26 59.91 57.65 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 55.48 53.41 51.42 49.52 47.69 45.94 44.26 42.65 41.1 39.62 38.2 36.84 35.53 34.27 33.06 31.91 30.79 29.72 28.69 27.71 26.76 25.84 24.96 24.12 23.31 22.52 21.77 21.05 20.35 19.68 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 19.03 18.41 17.81 17.23 16.68 16.14 15.62 15.12 14.64 14.18 13.74 13.31 12.89 12.49 12.1 11.73 11.37 11.02 10.69 10.36 10.05 9.746 9.455 9.173 8.901 8.637 8.383 8.137 7.899 7.669 7.447 ORDERING INFORMATION Part Number 701015 701115 Description 44015RC,THERM,ROHS COMPLIANT 44015RC-BP (100 PCS),THERM,ROHS @25C 1,000,000 1,000,000 MOQ 300 300 * For quantities less than Minimum Order Quantity - contact distribution Model Number 44015 Rev B www.meas-spec.com 2/3 5 June 2010 44014RC Precision Epoxy NTC Thermistor NORTH AMERICA EUROPE Measurement Specialties, Inc. 910 Turnpike Road Shrewsbury, MA 01545 Tel: 1-508-842-0516 Fax: 1-508-842-0342 Sales: Measurement Specialties, Inc Ballybrit Business Park Galway Ireland Tel: +353-91-753238 Fax: +353-91-770789 Sales: temperature.sales.amer@meas-spec.com temperature.sales.emea@meas-spec.com ASIA Measurement Specialties (China) Ltd. Block 5A, Tian Fa Building Tian An Cyber Park Futian District, Shenzhen 518048 China Tel: +86 (0) 755 833 01004 Fax: +86 (0) 755 833 06797 Sales: temperature.sales.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. Model Number 44015 Rev B www.meas-spec.com 3/3 5 June 2010 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 44015RC